On Tue, 22 Jan 2019 at 17:00, Carsten Schoenert <c.schoen...@t-online.de> wrote: > > Package: wnpp > Severity: wishlist > Owner: Carsten Schoenert <c.schoen...@t-online.de> > > * Package name : ponyprog > Version : 3.0.0~rc0 > Upstream Author : Claudio Lanconelli <claudiolancone...@gmail.com> > Eduard Kalinowski <eduard_kalinow...@yahoo.de> > * URL : https://github.com/lancos/ponyprog > * License : GPL-2+, LGPL-2.1 > Programming Lang: C++, > Description : Serial device programmer > > PonyProg is a serial device programmer software with a user friendly > GUI framework available for Windows and Linux. Its purpose is reading > and writing every serial device. With PonyProg and SI-Prog you can > program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. > Furthermore it can be used as a low cost starter kit for PIC and AVR. > . > PonyProg supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC > 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips. > . > You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them > to uC or PIC. You can even backup the old program on the chip using > Ponyprog. Ponyprog enables the user to write, verify and erase data on > the microchip. > . > Set fuse bits and locks using PonyProg. You can save any HEX file to > BIN file or eep file,BIN file to HEX file or MOT file and vice versa so > you can use Ponyprog as converter too. PonyProg offers serial or > parallel port programming for uC's. You can even change polarity of > control lines without touching the wires using I/O port setup. > . > Using Ponyprog together with generic USB2serial adapters is currently > not possible! There are plans by upstream to use libusb to add such > functionality. > > This package will be maintained within the Debian Electronics team. > Co-maintainers are welcome!
Unbelievable, I didn’t know PonyProg is still being maintained. At some point in the past (2009?) I though about rewriting it from scratch, but I’m happy to see it being developed again! -- Cheers, Andrej