-----Original Message----- From: Simon Hepburn [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 20, 2002 6:18 PM To: [EMAIL PROTECTED] Subject: Re: Matrox 450DH + X
Simon Hepburn wrote: >Michael Kahle wrote: > >> 2.) In section Module he removed the following: >> GLCore >> bitmap >> ddc >> int10 >> record >> speedo >> vbe >> >> but left: >> dbe >> dri >> extmode >> freetype >> glx >> type1 >> >> I asked why these were removed and the explination was, "What i remove was >> loaded by automatically as needed, i only left what is actually needs to be >> loaded." >> >> Can anyone here elaborate on this? Or even better point me to a link that >> explaines what these Modules do. > >GLCore is a sub-module of glx, putting it in your config just causes it to get >reloaded a second time and waste a few cycles. > >bitmap is loaded by default. > >ddc is a sub-module of vbe, putting it in your config just causes it to get >reloaded a second time and waste a few cycles. > >int10 is needed by vbe and not loaded automatically, put it back in your >config if you use vbe. > >Whether you use record, speedo and vbe is a matter of personal preference, >there is no particular reason not to use them. > Thank you everyone for your help with this issue. I now have my work workstation running MY distro of choice, and not the companies! :) Thanks again. Your help is most appreciated. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
