On Wed, Apr 06, 2011 at 10:22:33AM +0200, Tormod Volden wrote: > Can you please also attach dmesg output? You can for instance > blind-type "dmesg > dmesg.txt" or pick the right /var/log/kern.log* > after rebooting.
Here are kern.log from lenny and dmesg from squeeze Bye Martin
Mar 30 19:37:12 lenny kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 30 19:37:12 lenny kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 30 19:37:12 lenny kernel: [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Dec 26 09:01:51 UTC 2009 Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-provided physical RAM map: Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000bffe400 (usable) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 000000000bffe400 - 000000000bfffc00 (ACPI data) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS) Mar 30 19:37:12 lenny kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Mar 30 19:37:12 lenny kernel: [ 0.000000] 0MB HIGHMEM available. Mar 30 19:37:12 lenny kernel: [ 0.000000] 191MB LOWMEM available. Mar 30 19:37:12 lenny kernel: [ 0.000000] Entering add_active_range(0, 0, 49150) 0 entries of 256 used Mar 30 19:37:12 lenny kernel: [ 0.000000] Zone PFN ranges: Mar 30 19:37:12 lenny kernel: [ 0.000000] DMA 0 -> 4096 Mar 30 19:37:12 lenny kernel: [ 0.000000] Normal 4096 -> 49150 Mar 30 19:37:12 lenny kernel: [ 0.000000] HighMem 49150 -> 49150 Mar 30 19:37:12 lenny kernel: [ 0.000000] Movable zone start PFN for each node Mar 30 19:37:12 lenny kernel: [ 0.000000] early_node_map[1] active PFN ranges Mar 30 19:37:12 lenny kernel: [ 0.000000] 0: 0 -> 49150 Mar 30 19:37:12 lenny kernel: [ 0.000000] On node 0 totalpages: 49150 Mar 30 19:37:12 lenny kernel: [ 0.000000] DMA zone: 32 pages used for memmap Mar 30 19:37:12 lenny kernel: [ 0.000000] DMA zone: 0 pages reserved Mar 30 19:37:12 lenny kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 Mar 30 19:37:12 lenny kernel: [ 0.000000] Normal zone: 352 pages used for memmap Mar 30 19:37:12 lenny kernel: [ 0.000000] Normal zone: 44702 pages, LIFO batch:7 Mar 30 19:37:12 lenny kernel: [ 0.000000] HighMem zone: 0 pages used for memmap Mar 30 19:37:12 lenny kernel: [ 0.000000] Movable zone: 0 pages used for memmap Mar 30 19:37:12 lenny kernel: [ 0.000000] DMI not present or invalid. Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: RSDP 000F70F0, 0014 (r0 PTLTD ) Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: RSDT 0BFFE652, 0028 (r1 PTLTD RSDT 0 PTL 1000000) Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: FACP 0BFFE67A, 0074 (r1 SAG D1026 0 F4240) Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: DSDT 0BFFE6EE, 1512 (r1 SAG D1026 1 MSFT 100000A) Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: FACS 0BFFFFC0, 0040 Mar 30 19:37:12 lenny kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xf0c8 Mar 30 19:37:12 lenny kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0c000000:f3ff0000) Mar 30 19:37:12 lenny kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Mar 30 19:37:12 lenny kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 Mar 30 19:37:12 lenny kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Mar 30 19:37:12 lenny kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs Mar 30 19:37:12 lenny kernel: [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data Mar 30 19:37:12 lenny kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 Mar 30 19:37:12 lenny kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48766 Mar 30 19:37:12 lenny kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=/dev/hda5 ro quiet Mar 30 19:37:12 lenny kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" Mar 30 19:37:12 lenny kernel: [ 0.000000] mapped APIC to ffffb000 (0118c000) Mar 30 19:37:12 lenny kernel: [ 0.000000] Enabling fast FPU save and restore... done. Mar 30 19:37:12 lenny kernel: [ 0.000000] Initializing CPU#0 Mar 30 19:37:12 lenny kernel: [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) Mar 30 19:37:12 lenny kernel: [ 0.000000] Detected 366.198 MHz processor. Mar 30 19:37:12 lenny kernel: [ 0.004000] Console: colour VGA+ 80x25 Mar 30 19:37:12 lenny kernel: [ 0.004000] console [tty0] enabled Mar 30 19:37:12 lenny kernel: [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Mar 30 19:37:12 lenny kernel: [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mar 30 19:37:12 lenny kernel: [ 0.004000] Memory: 184928k/196600k available (1770k kernel code, 11116k reserved, 750k data, 244k init, 0k highmem) Mar 30 19:37:12 lenny kernel: [ 0.004000] virtual kernel memory layout: Mar 30 19:37:12 lenny kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) Mar 30 19:37:12 lenny kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Mar 30 19:37:12 lenny kernel: [ 0.004000] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB) Mar 30 19:37:12 lenny kernel: [ 0.004000] lowmem : 0xc0000000 - 0xcbffe000 ( 191 MB) Mar 30 19:37:12 lenny kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) Mar 30 19:37:12 lenny kernel: [ 0.004000] .data : 0xc02baba9 - 0xc0376620 ( 750 kB) Mar 30 19:37:12 lenny kernel: [ 0.004000] .text : 0xc0100000 - 0xc02baba9 (1770 kB) Mar 30 19:37:12 lenny kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Mar 30 19:37:12 lenny kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated Mar 30 19:37:12 lenny kernel: [ 0.084766] Calibrating delay using timer specific routine.. 733.93 BogoMIPS (lpj=1467879) Mar 30 19:37:12 lenny kernel: [ 0.084990] Security Framework initialized Mar 30 19:37:12 lenny kernel: [ 0.085028] SELinux: Disabled at boot. Mar 30 19:37:12 lenny kernel: [ 0.085049] Capability LSM initialized Mar 30 19:37:12 lenny kernel: [ 0.085144] Mount-cache hash table entries: 512 Mar 30 19:37:12 lenny kernel: [ 0.085952] Initializing cgroup subsys ns Mar 30 19:37:12 lenny kernel: [ 0.085981] Initializing cgroup subsys cpuacct Mar 30 19:37:12 lenny kernel: [ 0.085998] Initializing cgroup subsys devices Mar 30 19:37:12 lenny kernel: [ 0.086120] CPU: L1 I cache: 16K, L1 D cache: 16K Mar 30 19:37:12 lenny kernel: [ 0.086140] CPU: L2 cache: 128K Mar 30 19:37:12 lenny kernel: [ 0.086160] Intel machine check architecture supported. Mar 30 19:37:12 lenny kernel: [ 0.086182] Intel machine check reporting enabled on CPU#0. Mar 30 19:37:12 lenny kernel: [ 0.086256] Checking 'hlt' instruction... OK. Mar 30 19:37:12 lenny kernel: [ 0.100892] SMP alternatives: switching to UP code Mar 30 19:37:12 lenny kernel: [ 0.123859] Freeing SMP alternatives: 16k freed Mar 30 19:37:12 lenny kernel: [ 0.123889] ACPI: Core revision 20080321 Mar 30 19:37:12 lenny kernel: [ 0.131020] ACPI: setting ELCR to 0200 (from 0a00) Mar 30 19:37:12 lenny kernel: [ 0.133813] weird, boot CPU (#0) not listedby the BIOS. Mar 30 19:37:12 lenny kernel: [ 0.133831] SMP motherboard not detected. Mar 30 19:37:12 lenny kernel: [ 0.133847] Local APIC not detected. Using dummy APIC emulation. Mar 30 19:37:12 lenny kernel: [ 0.133859] SMP disabled Mar 30 19:37:12 lenny kernel: [ 0.134201] Brought up 1 CPUs Mar 30 19:37:12 lenny kernel: [ 0.134220] Total of 1 processors activated (733.93 BogoMIPS). Mar 30 19:37:12 lenny kernel: [ 0.134267] CPU0 attaching sched-domain: Mar 30 19:37:12 lenny kernel: [ 0.134284] domain 0: span 0 Mar 30 19:37:12 lenny kernel: [ 0.134297] groups: 0 Mar 30 19:37:12 lenny kernel: [ 0.135729] net_namespace: 660 bytes Mar 30 19:37:12 lenny kernel: [ 0.135761] Booting paravirtualized kernel on bare hardware Mar 30 19:37:12 lenny kernel: [ 0.137575] NET: Registered protocol family 16 Mar 30 19:37:12 lenny kernel: [ 0.139619] ACPI: bus type pci registered Mar 30 19:37:12 lenny kernel: [ 0.154153] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1 Mar 30 19:37:12 lenny kernel: [ 0.154174] PCI: Using configuration type 1 for base access Mar 30 19:37:12 lenny kernel: [ 0.154193] Setting up standard PCI resources Mar 30 19:37:12 lenny kernel: [ 0.162109] ACPI: EC: Look up EC in DSDT Mar 30 19:37:12 lenny kernel: [ 0.169918] ACPI: Interpreter enabled Mar 30 19:37:12 lenny kernel: [ 0.169946] ACPI: (supports S0 S1 S4 S5) Mar 30 19:37:12 lenny kernel: [ 0.170020] ACPI: Using PIC for interrupt routing Mar 30 19:37:12 lenny kernel: [ 0.183901] ACPI: Device [LPT] status [00000008]: functional but not present; setting present Mar 30 19:37:12 lenny kernel: [ 0.189633] ACPI: PCI Root Bridge [PCI0] (0000:00) Mar 30 19:37:12 lenny kernel: [ 0.190511] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, Mar 30 19:37:12 lenny kernel: [ 0.190525] * this clock source is slow. Consider trying other clock sources Mar 30 19:37:12 lenny kernel: [ 0.190621] pci 0000:00:07.3: quirk: region f0c0-f0ff claimed by PIIX4 ACPI Mar 30 19:37:12 lenny kernel: [ 0.190642] pci 0000:00:07.3: quirk: region f0b0-f0bf claimed by PIIX4 SMB Mar 30 19:37:12 lenny kernel: [ 0.191137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Mar 30 19:37:12 lenny kernel: [ 0.199428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Mar 30 19:37:12 lenny kernel: [ 0.199878] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Mar 30 19:37:12 lenny kernel: [ 0.200473] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Mar 30 19:37:12 lenny kernel: [ 0.200993] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Mar 30 19:37:12 lenny kernel: [ 0.202009] Linux Plug and Play Support v0.97 (c) Adam Belay Mar 30 19:37:12 lenny kernel: [ 0.202301] pnp: PnP ACPI init Mar 30 19:37:12 lenny kernel: [ 0.202359] ACPI: bus type pnp registered Mar 30 19:37:12 lenny kernel: [ 0.215404] pnp: PnP ACPI: found 13 devices Mar 30 19:37:12 lenny kernel: [ 0.215425] ACPI: ACPI bus type pnp unregistered Mar 30 19:37:12 lenny kernel: [ 0.215444] PnPBIOS: Disabled by ACPI PNP Mar 30 19:37:12 lenny kernel: [ 0.217941] PCI: Using ACPI for IRQ routing Mar 30 19:37:12 lenny kernel: [ 0.219130] system 00:01: ioport range 0x4d0-0x4d1 has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219158] system 00:01: ioport range 0xf000-0xf00f has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219176] system 00:01: ioport range 0xf010-0xf01f has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219195] system 00:01: ioport range 0xf030-0xf03f has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219213] system 00:01: ioport range 0xf080-0xf08f has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219231] system 00:01: ioport range 0xf0b0-0xf0bf has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219250] system 00:01: ioport range 0xf0c0-0xf0ff has been reserved Mar 30 19:37:12 lenny kernel: [ 0.219268] system 00:01: ioport range 0xfe10-0xfe1f has been reserved Mar 30 19:37:12 lenny kernel: [ 0.253041] PCI: Bridge: 0000:00:01.0 Mar 30 19:37:12 lenny kernel: [ 0.253060] IO window: disabled. Mar 30 19:37:12 lenny kernel: [ 0.253080] MEM window: 0xfe000000-0xfecfffff Mar 30 19:37:12 lenny kernel: [ 0.253098] PREFETCH window: 0x00000000de000000-0x00000000deffffff Mar 30 19:37:12 lenny kernel: [ 0.253297] NET: Registered protocol family 2 Mar 30 19:37:12 lenny kernel: [ 0.253937] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Mar 30 19:37:12 lenny kernel: [ 0.255273] TCP established hash table entries: 8192 (order: 4, 65536 bytes) Mar 30 19:37:12 lenny kernel: [ 0.255618] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) Mar 30 19:37:12 lenny kernel: [ 0.255999] TCP: Hash tables configured (established 8192 bind 8192) Mar 30 19:37:12 lenny kernel: [ 0.256132] TCP reno registered Mar 30 19:37:12 lenny kernel: [ 0.256926] NET: Registered protocol family 1 Mar 30 19:37:12 lenny kernel: [ 0.257614] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 Mar 30 19:37:12 lenny kernel: [ 1.805258] it is Mar 30 19:37:12 lenny kernel: [ 3.639740] Freeing initrd memory: 6071k freed Mar 30 19:37:12 lenny kernel: [ 3.643922] audit: initializing netlink socket (disabled) Mar 30 19:37:12 lenny kernel: [ 3.644001] type=2000 audit(1301513787.640:1): initialized Mar 30 19:37:12 lenny kernel: [ 3.644813] Total HugeTLB memory allocated, 0 Mar 30 19:37:12 lenny kernel: [ 3.645313] VFS: Disk quotas dquot_6.5.1 Mar 30 19:37:12 lenny kernel: [ 3.645518] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Mar 30 19:37:12 lenny kernel: [ 3.645758] msgmni has been set to 373 Mar 30 19:37:12 lenny kernel: [ 3.646658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Mar 30 19:37:12 lenny kernel: [ 3.646686] io scheduler noop registered Mar 30 19:37:12 lenny kernel: [ 3.646698] io scheduler anticipatory registered Mar 30 19:37:12 lenny kernel: [ 3.646711] io scheduler deadline registered Mar 30 19:37:12 lenny kernel: [ 3.646805] io scheduler cfq registered (default) Mar 30 19:37:12 lenny kernel: [ 3.646855] pci 0000:00:00.0: Limiting direct PCI/PCI transfers Mar 30 19:37:12 lenny kernel: [ 3.646931] pci 0000:01:00.0: Boot video device Mar 30 19:37:12 lenny kernel: [ 3.649740] isapnp: Scanning for PnP cards... Mar 30 19:37:12 lenny kernel: [ 4.004794] isapnp: No Plug & Play device found Mar 30 19:37:12 lenny kernel: [ 4.030150] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Mar 30 19:37:12 lenny kernel: [ 4.030712] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 30 19:37:12 lenny kernel: [ 4.031241] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Mar 30 19:37:12 lenny kernel: [ 4.034131] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 30 19:37:12 lenny kernel: [ 4.035133] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Mar 30 19:37:12 lenny kernel: [ 4.049271] brd: module loaded Mar 30 19:37:12 lenny kernel: [ 4.050118] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Mar 30 19:37:12 lenny kernel: [ 4.053194] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 30 19:37:12 lenny kernel: [ 4.053233] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 30 19:37:12 lenny kernel: [ 4.054547] mice: PS/2 mouse device common for all mice Mar 30 19:37:12 lenny kernel: [ 4.055647] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Mar 30 19:37:12 lenny kernel: [ 4.055713] rtc0: alarms up to one day, y3k Mar 30 19:37:12 lenny kernel: [ 4.056429] cpuidle: using governor ladder Mar 30 19:37:12 lenny kernel: [ 4.056448] cpuidle: using governor menu Mar 30 19:37:12 lenny kernel: [ 4.056486] No iBFT detected. Mar 30 19:37:12 lenny kernel: [ 4.059396] TCP cubic registered Mar 30 19:37:12 lenny kernel: [ 4.059418] NET: Registered protocol family 17 Mar 30 19:37:12 lenny kernel: [ 4.059451] Using IPI No-Shortcut mode Mar 30 19:37:12 lenny kernel: [ 4.060867] registered taskstats version 1 Mar 30 19:37:12 lenny kernel: [ 4.061421] rtc_cmos 00:03: setting system clock to 2011-03-30 19:36:28 UTC (1301513788) Mar 30 19:37:12 lenny kernel: [ 4.062498] Freeing unused kernel memory: 244k freed Mar 30 19:37:12 lenny kernel: [ 4.079770] input: AT Translated Set 2 keyboard as /class/input/input0 Mar 30 19:37:12 lenny kernel: [ 4.722624] ACPI: ACPI0007:00 is registered as cooling_device0 Mar 30 19:37:12 lenny kernel: [ 7.315343] No dock devices found. Mar 30 19:37:12 lenny kernel: [ 8.200570] SCSI subsystem initialized Mar 30 19:37:12 lenny kernel: [ 8.634731] usbcore: registered new interface driver usbfs Mar 30 19:37:12 lenny kernel: [ 8.634888] usbcore: registered new interface driver hub Mar 30 19:37:12 lenny kernel: [ 8.635195] usbcore: registered new device driver usb Mar 30 19:37:12 lenny kernel: [ 9.289659] USB Universal Host Controller Interface driver v3.0 Mar 30 19:37:12 lenny kernel: [ 9.289869] uhci_hcd 0000:00:07.2: enabling device (0004 -> 0005) Mar 30 19:37:12 lenny kernel: [ 9.290779] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 Mar 30 19:37:12 lenny kernel: [ 9.290799] PCI: setting IRQ 9 as level-triggered Mar 30 19:37:12 lenny kernel: [ 9.290813] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Mar 30 19:37:12 lenny kernel: [ 9.290863] uhci_hcd 0000:00:07.2: UHCI Host Controller Mar 30 19:37:12 lenny kernel: [ 9.291326] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 Mar 30 19:37:12 lenny kernel: [ 9.291413] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000f800 Mar 30 19:37:12 lenny kernel: [ 9.291957] usb usb1: configuration #1 chosen from 1 choice Mar 30 19:37:12 lenny kernel: [ 9.292244] hub 1-0:1.0: USB hub found Mar 30 19:37:12 lenny kernel: [ 9.292303] hub 1-0:1.0: 2 ports detected Mar 30 19:37:12 lenny kernel: [ 9.303074] Floppy drive(s): fd0 is 1.44M Mar 30 19:37:12 lenny kernel: [ 9.307344] libata version 3.00 loaded. Mar 30 19:37:12 lenny kernel: [ 9.319620] FDC 0 is a National Semiconductor PC87306 Mar 30 19:37:12 lenny kernel: [ 9.397724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Mar 30 19:37:12 lenny kernel: [ 9.397751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 30 19:37:12 lenny kernel: [ 9.397768] usb usb1: Product: UHCI Host Controller Mar 30 19:37:12 lenny kernel: [ 9.397781] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd Mar 30 19:37:12 lenny kernel: [ 9.397795] usb usb1: SerialNumber: 0000:00:07.2 Mar 30 19:37:12 lenny kernel: [ 9.660227] usb 1-1: new full speed USB device using uhci_hcd and address 2 Mar 30 19:37:12 lenny kernel: [ 9.716715] Uniform Multi-Platform E-IDE driver Mar 30 19:37:12 lenny kernel: [ 9.716744] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 30 19:37:12 lenny kernel: [ 9.768693] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1 Mar 30 19:37:12 lenny kernel: [ 9.768760] PIIX4: not 100% native mode: will probe irqs later Mar 30 19:37:12 lenny kernel: [ 9.768799] ide0: BM-DMA at 0xfcf0-0xfcf7 Mar 30 19:37:12 lenny kernel: [ 9.768839] ide1: BM-DMA at 0xfcf8-0xfcff Mar 30 19:37:12 lenny kernel: [ 9.768861] Probing IDE interface ide0... Mar 30 19:37:12 lenny kernel: [ 9.806573] usb 1-1: device descriptor read/all, error -71 Mar 30 19:37:12 lenny kernel: [ 9.916190] usb 1-1: new full speed USB device using uhci_hcd and address 3 Mar 30 19:37:12 lenny kernel: [ 10.056207] hda: QUANTUM FIREBALLlct20 30, ATA DISK drive Mar 30 19:37:12 lenny kernel: [ 10.059439] usb 1-1: device descriptor read/all, error -71 Mar 30 19:37:12 lenny kernel: [ 10.116109] hub 1-0:1.0: unable to enumerate USB device on port 1 Mar 30 19:37:12 lenny kernel: [ 10.560095] usb 1-1: new full speed USB device using uhci_hcd and address 5 Mar 30 19:37:12 lenny kernel: [ 10.700019] usb 1-1: device descriptor read/all, error -71 Mar 30 19:37:12 lenny kernel: [ 10.728312] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 Mar 30 19:37:12 lenny kernel: [ 10.728647] hda: UDMA/33 mode selected Mar 30 19:37:12 lenny kernel: [ 10.729013] Probing IDE interface ide1... Mar 30 19:37:12 lenny kernel: [ 10.760160] hub 1-0:1.0: unable to enumerate USB device on port 1 Mar 30 19:37:12 lenny kernel: [ 11.056076] usb 1-1: new full speed USB device using uhci_hcd and address 7 Mar 30 19:37:12 lenny kernel: [ 11.196018] usb 1-1: device descriptor read/all, error -71 Mar 30 19:37:12 lenny kernel: [ 11.256108] hub 1-0:1.0: unable to enumerate USB device on port 1 Mar 30 19:37:12 lenny kernel: [ 11.464202] hdc: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive Mar 30 19:37:12 lenny kernel: [ 11.552076] usb 1-1: new full speed USB device using uhci_hcd and address 9 Mar 30 19:37:12 lenny kernel: [ 11.764020] usb 1-1: configuration #1 chosen from 1 choice Mar 30 19:37:12 lenny kernel: [ 11.783971] usb 1-1: New USB device found, idVendor=0c0b, idProduct=b136 Mar 30 19:37:12 lenny kernel: [ 11.783996] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 30 19:37:12 lenny kernel: [ 11.784096] usb 1-1: Product: r Technology J81 Mar 30 19:37:12 lenny kernel: [ 11.784111] usb 1-1: Manufacturer: TrekStor Mar 30 19:37:12 lenny kernel: [ 11.784123] usb 1-1: SerialNumber: 000000000010E1DCW Mar 30 19:37:12 lenny kernel: [ 11.800328] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 Mar 30 19:37:12 lenny kernel: [ 11.801115] hdc: UDMA/33 mode selected Mar 30 19:37:12 lenny kernel: [ 11.801640] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 30 19:37:12 lenny kernel: [ 11.801832] ide1 at 0x170-0x177,0x376 on irq 15 Mar 30 19:37:12 lenny kernel: [ 12.142774] hda: max request size: 128KiB Mar 30 19:37:12 lenny kernel: [ 12.170247] hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=58168/16/63 Mar 30 19:37:12 lenny kernel: [ 12.170279] hda: cache flushes not supported Mar 30 19:37:12 lenny kernel: [ 12.170518] hda:<6>Initializing USB Mass Storage driver... Mar 30 19:37:12 lenny kernel: [ 12.191650] hda1 hda2 hda3 hda4 <<6>scsi0 : SCSI emulation for USB Mass Storage devices Mar 30 19:37:12 lenny kernel: [ 12.198544] usbcore: registered new interface driver usb-storage Mar 30 19:37:12 lenny kernel: [ 12.198573] USB Mass Storage support registered. Mar 30 19:37:12 lenny kernel: [ 12.198603] usb-storage: device found at 9 Mar 30 19:37:12 lenny kernel: [ 12.198617] usb-storage: waiting for device to settle before scanning Mar 30 19:37:12 lenny kernel: [ 12.212624] hda5 hda6 > Mar 30 19:37:12 lenny kernel: [ 12.251793] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Mar 30 19:37:12 lenny kernel: [ 12.251837] Uniform CD-ROM driver Revision: 3.20 Mar 30 19:37:12 lenny kernel: [ 13.467063] PM: Starting manual resume from disk Mar 30 19:37:12 lenny kernel: [ 13.626517] kjournald starting. Commit interval 5 seconds Mar 30 19:37:12 lenny kernel: [ 13.626517] EXT3-fs: mounted filesystem with ordered data mode. Mar 30 19:37:12 lenny kernel: [ 17.198468] usb-storage: device scan complete Mar 30 19:37:12 lenny kernel: [ 17.201309] scsi 0:0:0:0: Direct-Access TrekStor r Technology J81 1.05 PQ: 0 ANSI: 0 Mar 30 19:37:12 lenny kernel: [ 17.889073] udevd version 125 started Mar 30 19:37:12 lenny kernel: [ 18.501753] Driver 'sd' needs updating - please use bus_type methods Mar 30 19:37:12 lenny kernel: [ 18.524228] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) Mar 30 19:37:12 lenny kernel: [ 18.527010] sd 0:0:0:0: [sda] Write Protect is off Mar 30 19:37:12 lenny kernel: [ 18.527040] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 Mar 30 19:37:12 lenny kernel: [ 18.527057] sd 0:0:0:0: [sda] Assuming drive cache: write through Mar 30 19:37:12 lenny kernel: [ 18.532021] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) Mar 30 19:37:12 lenny kernel: [ 18.534993] sd 0:0:0:0: [sda] Write Protect is off Mar 30 19:37:12 lenny kernel: [ 18.535024] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 Mar 30 19:37:12 lenny kernel: [ 18.535041] sd 0:0:0:0: [sda] Assuming drive cache: write through Mar 30 19:37:12 lenny kernel: [ 18.535165] sda: sda1 sda2 Mar 30 19:37:12 lenny kernel: [ 18.541830] sd 0:0:0:0: [sda] Attached SCSI disk Mar 30 19:37:12 lenny kernel: [ 24.162198] input: PC Speaker as /class/input/input1 Mar 30 19:37:12 lenny kernel: [ 26.115500] Linux agpgart interface v0.103 Mar 30 19:37:12 lenny kernel: [ 26.355507] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 30 19:37:12 lenny kernel: [ 26.380624] agpgart: Detected an Intel 440LX Chipset. Mar 30 19:37:12 lenny kernel: [ 26.411283] agpgart: AGP aperture is 256M @ 0xe0000000 Mar 30 19:37:12 lenny kernel: [ 26.802342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Mar 30 19:37:12 lenny kernel: [ 26.888508] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device Mar 30 19:37:12 lenny kernel: [ 27.995753] input: PS/2 Logitech Mouse as /class/input/input2 Mar 30 19:37:12 lenny kernel: [ 30.377069] input: Power Button (CM) as /class/input/input3 Mar 30 19:37:12 lenny kernel: [ 30.404529] ACPI: Power Button (CM) [PWRB] Mar 30 19:37:12 lenny kernel: [ 31.900290] parport_pc 00:09: activated Mar 30 19:37:12 lenny kernel: [ 31.900318] parport_pc 00:09: reported by Plug and Play ACPI Mar 30 19:37:12 lenny kernel: [ 31.900372] parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE,EPP] Mar 30 19:37:12 lenny kernel: [ 32.002004] parport_pc 00:0a: reported by Plug and Play ACPI Mar 30 19:37:12 lenny kernel: [ 32.002349] parport_pc 00:0a: disabled Mar 30 19:37:12 lenny kernel: [ 35.982024] ENS1371 0000:00:12.0: enabling device (0104 -> 0105) Mar 30 19:37:12 lenny kernel: [ 35.982968] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Mar 30 19:37:12 lenny kernel: [ 35.982989] PCI: setting IRQ 11 as level-triggered Mar 30 19:37:12 lenny kernel: [ 35.983004] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Mar 30 19:37:12 lenny kernel: [ 39.159146] Adding 239608k swap on /dev/hda3. Priority:-1 extents:1 across:239608k Mar 30 19:37:12 lenny kernel: [ 39.726889] EXT3 FS on hda5, internal journal Mar 30 19:37:12 lenny kernel: [ 40.645363] loop: module loaded Mar 30 19:37:12 lenny kernel: [ 41.840093] kjournald starting. Commit interval 5 seconds Mar 30 19:37:12 lenny kernel: [ 41.844381] EXT3 FS on hda6, internal journal Mar 30 19:37:12 lenny kernel: [ 41.844412] EXT3-fs: mounted filesystem with ordered data mode. Mar 30 19:37:15 lenny kernel: [ 51.146523] NET: Registered protocol family 10 Mar 30 19:37:15 lenny kernel: [ 51.149229] lo: Disabled Privacy Extensions Mar 30 19:37:15 lenny kernel: [ 51.650533] lp0: using parport0 (interrupt-driven). Mar 30 19:37:15 lenny kernel: [ 51.760192] ppdev: user-space parallel port driver
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000bffe400 (usable) [ 0.000000] BIOS-e820: 000000000bffe400 - 000000000bfffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0xbffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF8000000 write-back [ 0.000000] 1 base 008000000 mask FFC000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000bffe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000bc00000 page 2M [ 0.000000] 000bc00000 - 000bffe000 page 4k [ 0.000000] kernel direct mapping tables up to bffe000 @ 7000-d000 [ 0.000000] RAMDISK: 08820000 - 0903e8ca [ 0.000000] ACPI: RSDP 000f70f0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 0bffe652 00028 (v01 PTLTD RSDT 00000000 PTL 01000000) [ 0.000000] ACPI: FACP 0bffe67a 00074 (v01 SAG D1026 00000000 000F4240) [ 0.000000] ACPI: DSDT 0bffe6ee 01512 (v01 SAG D1026 00000001 MSFT 0100000A) [ 0.000000] ACPI: FACS 0bffffc0 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 191MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0bffe000 [ 0.000000] low ram: 0 - 0bffe000 [ 0.000000] node 0 low ram: 00000000 - 0bffe000 [ 0.000000] node 0 bootmap 00002000 - 00003800 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000bffe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [0008820000 - 000903e8ca] RAMDISK ==> [0008820000 - 000903e8ca] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014ca000 - 00014d0000] BRK ==> [00014ca000 - 00014d0000] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000bffe [ 0.000000] HighMem 0x0000bffe -> 0x0000bffe [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000bffe [ 0.000000] On node 0 totalpages: 49053 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d1000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 352 pages used for memmap [ 0.000000] Normal zone: 44702 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xf0c8 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c000000 (gap: c000000:f3ff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34296 r0 d23048 u4194304 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48669 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=14000971-c888-4110-acbb-79b2928c2515 ro quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 180964k/196600k available (2501k kernel code, 15088k reserved, 1323k data, 376k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xcc7fe000 - 0xff3fe000 ( 812 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcbffe000 ( 191 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 366.190 MHz processor. [ 0.008024] Calibrating delay loop (skipped), value calculated using timer frequency.. 732.38 BogoMIPS (lpj=1464760) [ 0.008148] Security Framework initialized [ 0.008191] SELinux: Disabled at boot. [ 0.008239] Mount-cache hash table entries: 512 [ 0.008982] Initializing cgroup subsys ns [ 0.009012] Initializing cgroup subsys cpuacct [ 0.009039] Initializing cgroup subsys devices [ 0.009056] Initializing cgroup subsys freezer [ 0.009072] Initializing cgroup subsys net_cls [ 0.009226] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.009245] CPU: L2 cache: 128K [ 0.009268] mce: CPU supports 5 MCE banks [ 0.009361] Performance Events: [ 0.009375] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.009390] no hardware sampling interrupt available. [ 0.009404] p6 PMU driver. [ 0.009483] ... version: 0 [ 0.009495] ... bit width: 32 [ 0.009507] ... generic registers: 2 [ 0.009520] ... value mask: 00000000ffffffff [ 0.009534] ... max period: 000000007fffffff [ 0.009547] ... fixed-purpose events: 0 [ 0.009559] ... event mask: 0000000000000003 [ 0.009586] Checking 'hlt' instruction... OK. [ 0.024191] SMP alternatives: switching to UP code [ 0.039705] Freeing SMP alternatives: 13k freed [ 0.039802] ACPI: Core revision 20090903 [ 0.046060] ACPI: setting ELCR to 0200 (from 0a00) [ 0.048415] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048433] weird, boot CPU (#0) not listed by the BIOS. [ 0.048445] SMP motherboard not detected. [ 0.048462] Local APIC not detected. Using dummy APIC emulation. [ 0.048474] SMP disabled [ 0.049704] Brought up 1 CPUs [ 0.049731] Total of 1 processors activated (732.38 BogoMIPS). [ 0.050882] CPU0 attaching NULL sched-domain. [ 0.052363] devtmpfs: initialized [ 0.055313] regulator: core version 0.5 [ 0.055699] NET: Registered protocol family 16 [ 0.056427] ACPI: bus type pci registered [ 0.071057] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1 [ 0.071077] PCI: Using configuration type 1 for base access [ 0.073892] bio: create slab <bio-0> at 0 [ 0.075800] ACPI: EC: Look up EC in DSDT [ 0.084261] ACPI: Interpreter enabled [ 0.084284] ACPI: (supports S0 S1 S4 S5) [ 0.084400] ACPI: Using PIC for interrupt routing [ 0.097447] ACPI: No dock devices found. [ 0.097978] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.098239] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.098607] pci 0000:00:07.1: reg 20 io port: [0xfcf0-0xfcff] [ 0.098733] pci 0000:00:07.2: reg 20 io port: [0xf800-0xf81f] [ 0.098810] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.098821] * this clock source is slow. Consider trying other clock sources [ 0.098915] pci 0000:00:07.3: quirk: region f0c0-f0ff claimed by PIIX4 ACPI [ 0.098937] pci 0000:00:07.3: quirk: region f0b0-f0bf claimed by PIIX4 SMB [ 0.099087] pci 0000:00:12.0: reg 10 io port: [0xf400-0xf43f] [ 0.099176] pci 0000:00:12.0: supports D2 [ 0.099259] pci 0000:00:13.0: reg 10 32bit mmio: [0xfedffc00-0xfedffcff] [ 0.099287] pci 0000:00:13.0: reg 14 io port: [0xe400-0xe407] [ 0.100060] pci 0000:00:13.0: reg 18 io port: [0xe800-0xe8ff] [ 0.100138] pci 0000:00:13.0: supports D2 [ 0.100155] pci 0000:00:13.0: PME# supported from D2 D3hot D3cold [ 0.100175] pci 0000:00:13.0: PME# disabled [ 0.100317] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xde000000-0xdeffffff] [ 0.100346] pci 0000:01:00.0: reg 14 32bit mmio: [0xfecf8000-0xfecfbfff] [ 0.100373] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe000000-0xfe7fffff] [ 0.100541] pci 0000:00:01.0: bridge 32bit mmio: [0xfe000000-0xfecfffff] [ 0.100566] pci 0000:00:01.0: bridge 32bit mmio pref: [0xde000000-0xdeffffff] [ 0.100600] pci_bus 0000:00: on NUMA node 0 [ 0.100640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.107726] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.108294] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.108779] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.109335] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.110000] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.110021] vgaarb: loaded [ 0.110548] PCI: Using ACPI for IRQ routing [ 0.111248] Switching to clocksource tsc [ 0.116300] pnp: PnP ACPI init [ 0.116544] ACPI: bus type pnp registered [ 0.125813] pnp: PnP ACPI: found 12 devices [ 0.125832] ACPI: ACPI bus type pnp unregistered [ 0.125851] PnPBIOS: Disabled by ACPI PNP [ 0.125922] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.125946] system 00:01: ioport range 0xf000-0xf00f has been reserved [ 0.125968] system 00:01: ioport range 0xf010-0xf01f has been reserved [ 0.125989] system 00:01: ioport range 0xf030-0xf03f has been reserved [ 0.126011] system 00:01: ioport range 0xf080-0xf08f has been reserved [ 0.126032] system 00:01: ioport range 0xf0b0-0xf0bf has been reserved [ 0.126054] system 00:01: ioport range 0xf0c0-0xf0ff has been reserved [ 0.126076] system 00:01: ioport range 0xfe10-0xfe1f has been reserved [ 0.162153] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.162172] pci 0000:00:01.0: IO window: disabled [ 0.162198] pci 0000:00:01.0: MEM window: 0xfe000000-0xfecfffff [ 0.162221] pci 0000:00:01.0: PREFETCH window: 0xde000000-0xdeffffff [ 0.162275] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.162295] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.162317] pci_bus 0000:01: resource 1 mem: [0xfe000000-0xfecfffff] [ 0.162337] pci_bus 0000:01: resource 2 pref mem [0xde000000-0xdeffffff] [ 0.162556] NET: Registered protocol family 2 [ 0.163182] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.165304] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.165680] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.166052] TCP: Hash tables configured (established 8192 bind 8192) [ 0.166070] TCP reno registered [ 0.166811] NET: Registered protocol family 1 [ 0.166943] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.167036] pci 0000:01:00.0: Boot video device [ 0.167427] Unpacking initramfs... [ 1.889266] Freeing initrd memory: 8314k freed [ 1.936625] audit: initializing netlink socket (disabled) [ 1.936707] type=2000 audit(1302118472.936:1): initialized [ 1.963972] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.975544] VFS: Disk quotas dquot_6.5.2 [ 1.976182] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.976835] msgmni has been set to 370 [ 1.978538] alg: No test for stdrng (krng) [ 1.978862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.978885] io scheduler noop registered [ 1.978898] io scheduler anticipatory registered [ 1.978912] io scheduler deadline registered [ 1.979229] io scheduler cfq registered (default) [ 1.980230] isapnp: Scanning for PnP cards... [ 2.334677] isapnp: No Plug & Play device found [ 2.346287] Linux agpgart interface v0.103 [ 2.346728] agpgart-intel 0000:00:00.0: Intel 440LX Chipset [ 2.378705] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 2.379107] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.379437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.379812] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.381717] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.382361] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.383192] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.385872] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.385915] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.386797] mice: PS/2 mouse device common for all mice [ 2.387369] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.387444] rtc0: alarms up to one day, y3k, 114 bytes nvram [ 2.387537] cpuidle: using governor ladder [ 2.387553] cpuidle: using governor menu [ 2.387584] No iBFT detected. [ 2.390662] TCP cubic registered [ 2.391923] NET: Registered protocol family 10 [ 2.395517] lo: Disabled Privacy Extensions [ 2.398071] Mobile IPv6 [ 2.398101] NET: Registered protocol family 17 [ 2.398216] Using IPI No-Shortcut mode [ 2.398923] PM: Resume from disk failed. [ 2.398994] registered taskstats version 1 [ 2.399710] rtc_cmos 00:03: setting system clock to 2011-04-06 19:34:33 UTC (1302118473) [ 2.399863] Initalizing network drop monitor service [ 2.400152] Freeing unused kernel memory: 376k freed [ 2.402500] Write protecting the kernel text: 2504k [ 2.402642] Write protecting the kernel read-only data: 920k [ 2.408456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.540958] udev[46]: starting version 164 [ 3.721267] SCSI subsystem initialized [ 3.776272] Floppy drive(s): fd0 is 1.44M [ 3.988836] FDC 0 is a National Semiconductor PC87306 [ 4.056252] libata version 3.00 loaded. [ 4.215806] usbcore: registered new interface driver usbfs [ 4.217708] usbcore: registered new interface driver hub [ 4.219548] usbcore: registered new device driver usb [ 4.229678] ata_piix 0000:00:07.1: version 2.13 [ 4.230409] scsi0 : ata_piix [ 4.232195] scsi1 : ata_piix [ 4.233330] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14 [ 4.233353] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15 [ 4.261608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.420754] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33 [ 4.421536] ata1.00: ATA-5: QUANTUM FIREBALLlct20 30, APL.0900, max UDMA/100 [ 4.421560] ata1.00: 58633344 sectors, multi 8: LBA [ 4.436771] ata2.00: configured for UDMA/33 [ 4.437056] ata1.00: configured for UDMA/33 [ 4.437854] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL APL. PQ: 0 ANSI: 5 [ 4.445925] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5 [ 4.514024] uhci_hcd: USB Universal Host Controller Interface driver [ 4.514372] uhci_hcd 0000:00:07.2: enabling device (0004 -> 0005) [ 4.515352] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 4.515372] PCI: setting IRQ 9 as level-triggered [ 4.515396] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 4.515444] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 4.515618] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 4.515709] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000f800 [ 4.515985] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.516006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.516159] usb usb1: Product: UHCI Host Controller [ 4.516177] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 4.516193] usb usb1: SerialNumber: 0000:00:07.2 [ 4.525413] usb usb1: configuration #1 chosen from 1 choice [ 4.526135] hub 1-0:1.0: USB hub found [ 4.526224] hub 1-0:1.0: 2 ports detected [ 4.649878] sd 0:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 4.650424] sd 0:0:0:0: [sda] Write Protect is off [ 4.650448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.650679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.651961] sda: sda1 sda2 sda3 sda4 < sda5sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.708185] Uniform CD-ROM driver Revision: 3.20 [ 4.711437] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.729097] sda6 > [ 4.747967] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.848381] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 4.879243] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.883508] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.008875] usb 1-1: New USB device found, idVendor=0c0b, idProduct=b136 [ 5.008901] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.008919] usb 1-1: Product: r Technology J81 [ 5.008934] usb 1-1: Manufacturer: TrekStor [ 5.008948] usb 1-1: SerialNumber: 000000000010E1DCW [ 5.011899] usb 1-1: configuration #1 chosen from 1 choice [ 5.103598] Initializing USB Mass Storage driver... [ 5.104338] scsi2 : SCSI emulation for USB Mass Storage devices [ 5.105683] usbcore: registered new interface driver usb-storage [ 5.105710] USB Mass Storage support registered. [ 5.111493] usb-storage: device found at 2 [ 5.111511] usb-storage: waiting for device to settle before scanning [ 6.899636] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.899658] EXT3-fs: write access will be enabled during recovery. [ 10.110296] usb-storage: device scan complete [ 10.113562] scsi 2:0:0:0: Direct-Access TrekStor r Technology J81 1.05 PQ: 0 ANSI: 0 [ 10.124994] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 10.134233] sd 2:0:0:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 10.137247] sd 2:0:0:0: [sdb] Write Protect is off [ 10.137281] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.137298] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 10.151244] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 10.151384] sdb: sdb1 sdb2 [ 10.191232] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 10.191360] sd 2:0:0:0: [sdb] Attached SCSI disk [ 10.386866] kjournald starting. Commit interval 5 seconds [ 10.387006] EXT3-fs: recovery complete. [ 10.413206] EXT3-fs: mounted filesystem with ordered data mode. [ 12.840173] udev[241]: starting version 164 [ 14.388981] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.947557] processor LNXCPU:00: registered as cooling_device0 [ 15.050022] martian loaded - 20080620 [ 15.050375] martian 0000:00:13.0: enabling device (0104 -> 0107) [ 15.058767] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 15.058791] PCI: setting IRQ 11 as level-triggered [ 15.058818] martian 0000:00:13.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 15.058947] IRQ 11/164x: IRQF_DISABLED is not guaranteed on shared IRQs [ 15.059036] martian: added device 11c1:440 BaseAddress = 0xe800, CommAddres = 0xe400, irq = 11 [ 15.077533] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 15.079005] ACPI: Power Button [PWRB] [ 15.094245] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 15.342904] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0xf0b0, revision 0 [ 15.466367] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.535138] parport_pc 00:09: reported by Plug and Play ACPI [ 15.535221] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 16.878723] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input3 [ 17.267491] Error: Driver 'pcspkr' is already registered, aborting... [ 17.582927] ENS1371 0000:00:12.0: enabling device (0104 -> 0105) [ 17.583917] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 17.583937] PCI: setting IRQ 10 as level-triggered [ 17.583963] ENS1371 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 22.798191] EXT3 FS on sda6, internal journal [ 23.176413] loop: module loaded [ 29.935011] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 30.315088] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 30.629809] kjournald starting. Commit interval 5 seconds [ 30.636572] EXT3 FS on sdb2, internal journal [ 30.636610] EXT3-fs: mounted filesystem with ordered data mode. [ 30.976404] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 47.951328] martian_modem is attached. [ 262.837523] PPP generic driver version 2.4.2 [ 296.202673] PPP BSD Compression module registered [ 296.301789] PPP Deflate Compression module registered [ 320.156350] kjournald starting. Commit interval 5 seconds [ 320.157134] EXT3 FS on sda5, internal journal [ 320.157166] EXT3-fs: mounted filesystem with ordered data mode.
