Package: x11-xserver-utils Version: 7.7~3 Severity: normal xrandr does not let me select refresh rates that I know are available, usually giving the error:
Rate 60.0 Hz not available for this size (or whatever refresh rate I choose). I'm using the proprietary nvidia driver, 310.19-0+exp1, but with the options DynamicTwinView false and FlatPanelProperties Scaling=Native, so it should be reporting the refresh rates correctly to xrandr, and it always worked in the past. This is the output of xrandr in the default mode: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm 1920x1080 50.0*+ 60.0 59.9 24.0 30.0 30.0 25.0 1280x720 60.0 59.9 50.0 720x576 50.0 25.0 720x480 59.9 30.0 640x480 59.9 If I run "xrandr -r 50" the screen does go blank then reappear as if "changing" to the same mode, but all other refresh rates fail with the above error. If I run "xrandr -s 1280x720", I get a 60Hz display, but I can't select any refresh rate then, not even the 60Hz it's already at! (Same error). I tried 1.2 syntax: $ xrandr --output HDMI-0 --rate 60 but nothing happened. However, at the last minute I tried: $ xrandr --output HDMI-0 --mode 1920x1080 --rate 60 Success! I then tried to see if 1.1 syntax could switch back to 50Hz. It made the screen flicker and didn't error, but it stayed at 60Hz. Then the 1.2 command above started to fail with the original error. However, when I changed the 1.2 command to --rate 50 it worked correctly, and re-enabled --rate 60. Also: [htpc] $ gtf 1920 1080 60 # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync [htpc] $ xrandr --newmode "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync [htpc] $ xrandr --addmode HDMI-0 1920x1080_60.00 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30 -- System Information: Debian Release: 7.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.7-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages x11-xserver-utils depends on: ii cpp 4:4.7.2-1 ii libc6 2.13-38 ii libice6 2:1.0.8-2 ii libx11-6 2:1.5.0-1 ii libxaw7 2:1.0.10-2 ii libxcursor1 1:1.1.13-1 ii libxext6 2:1.3.1-2 ii libxi6 2:1.6.1-1 ii libxmu6 2:1.1.1-1 ii libxmuu1 2:1.1.1-1 ii libxrandr2 2:1.3.2-2 ii libxrender1 1:0.9.7-1 ii libxt6 1:1.1.3-1 ii libxxf86vm1 1:1.1.2-1 x11-xserver-utils recommends no packages. Versions of packages x11-xserver-utils suggests: pn cairo-5c <none> pn nickle <none> pn xorg-docs-core <none> -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
