It would seem so, but it is the right information. I double checked that it is right by booting without the video kernel parameter and running dmesg. I got the same radeonfb lines that you show in your message. I think that's part of the problem, radeonfb is compiled into the kernel and active when drm/radeon are being used? On a normal boot with a default configuration, radeonfb is active. It is blacklisted in /etc/modprobe.d/fbdev-blacklist.conf, but it's not compiled as an external kernel module (it's in the kernel itself) so the blacklisting doesn't work.
-------------------------------------------- On Thu, 9/18/14, Michel Dänzer <[email protected]> wrote: Subject: Re: Bug#762047: xserver-xorg-video-ati: Black screen with mouse cursor on PowerPC To: "Bill Chatfield" <[email protected]> Cc: [email protected] Date: Thursday, September 18, 2014, 2:24 AM On 18.09.2014 13:23, Bill Chatfield wrote: > [ 0.997986] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) > [ 1.193788] radeonfb 0000:00:10.0: Invalid ROM contents > [ 1.193813] radeonfb (0000:00:10.0): Invalid ROM signature 303 should be 0xaa55 > [ 1.193823] radeonfb: Retrieved PLL infos from Open Firmware > [ 1.193842] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=203.00 Mhz, System=392.00 MHz > [ 1.193864] radeonfb: PLL min 12000 max 35000 > [ 1.289994] i2c i2c-2: unable to read EDID block. > [ 1.441986] i2c i2c-2: unable to read EDID block. > [ 1.593986] i2c i2c-2: unable to read EDID block. > [ 1.949865] radeonfb: Monitor 1 type LCD found > [ 1.949881] radeonfb: EDID probed > [ 1.949893] radeonfb: Monitor 2 type no found > [ 1.949915] radeonfb: Using Firmware dividers 0x0002008e from PPLL 0 > [ 1.949981] radeonfb: Dynamic Clock Power Management enabled > [ 1.982573] Console: switching to colour frame buffer device 160x53 > [ 2.004457] radeonfb: Backlight initialized (radeonbl0) > [ 2.004635] radeonfb (0000:00:10.0): ATI Radeon 4e50 "NP" This shows that radeonfb is still enabled, so it doesn't provide the information corresponding to the bug. -- Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
