I am still facing the issue, this time I can see the 2 external screens as
"disconnected", even if they are connected, and with a resolution listed
for both.
DP-3-1-1 disconnected 3840x2160+0+0 (normal left inverted right x axis y
axis) 0mm x 0mm
DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
axis) 0mm x 0mm
3840x2160 (0x540) 519.940MHz +HSync -VSync
h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
133.32KHz
v: height 2160 start 2163 end 2168 total 2222 clock
60.00Hz
Trying to "remove" the monitors is throwing an error. Trying to remove an
empty one failed as expected.
DP-3-1 disconnected (normal left inverted right x axis y axis)
DP-3-1-1 disconnected 3840x2160+0+0 (normal left inverted right x axis y
axis) 0mm x 0mm
DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
axis) 0mm x 0mm
3840x2160 (0x540) 519.940MHz +HSync -VSync
h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
133.32KHz
v: height 2160 start 2163 end 2168 total 2222 clock
60.00Hz
jmspaggi@t14s:~$ xrandr --delmonitor DP-3-1-1
X Error of failed request: BadValue (integer parameter out of range for
operation)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 44 ()
Value in failed request: 0x213
Serial number of failed request: 51
Current serial number in output stream: 52
jmspaggi@t14s:~$ xrandr --delmonitor DP-3-1
No monitor named 'DP-3-1'
jmspaggi@t14s:~$ xrandr --delmonitor DP-3-2
X Error of failed request: BadValue (integer parameter out of range for
operation)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 44 ()
Value in failed request: 0x214
Serial number of failed request: 51
Current serial number in output stream: 52
jmspaggi@t14s:~$
Any idea what I can look at?
Le lun. 13 janv. 2025, à 10 h 27, Jean-Marc Spaggiari <
[email protected]> a écrit :
> Package: x11-xserver-utils
> Version: 7.7+10+b1
> Severity: normal
> X-Debbugs-Cc: [email protected]
>
> When connecting my laptop to an external hub with 2 screens, I'm getting
> the following xrandr output:
> DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
> axis) 0mm x 0mm
> 3840x2160 (0xec) 519.940MHz +HSync -VSync
> h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
> 133.32KHz
> v: height 2160 start 2163 end 2168 total 2222 clock
> 60.00Hz
>
> DP-3-2 is the right ID but it shows as disconnected. It is also showing
> only a single screen.
> After a computer restart, everything is showing correctly. Also, when
> running xrandr on the command line, the entire screen is freezing for a few
> seconds. This is causing issues to xfc4-display-setting to work correctly.
>
> Here are the outputs.
>
> With 3 screens, 2 on the hub + laptop, before restart:
> Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
> eDP-1 connected primary 2880x1800+0+0 (normal left inverted right x axis y
> axis) 302mm x 189mm
> 2880x1800 90.00*+ 60.00
> 2880x1620 59.96 59.97
> 2560x1600 59.99 59.97
> 2560x1440 59.99 59.99 59.96 59.95
> ...
> 320x200 85.27
> 320x180 59.84 59.32
> 320x175 85.27
> HDMI-1 disconnected (normal left inverted right x axis y axis)
> DP-1 disconnected (normal left inverted right x axis y axis)
> DP-2 disconnected (normal left inverted right x axis y axis)
> DP-3 disconnected (normal left inverted right x axis y axis)
> DP-4 disconnected (normal left inverted right x axis y axis)
> DP-3-1 disconnected (normal left inverted right x axis y axis)
> DP-3-1-1 disconnected 3840x2160+0+0 (normal left inverted right x axis y
> axis) 0mm x 0mm
> DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
> axis) 0mm x 0mm
> 3840x2160 (0xec) 519.940MHz +HSync -VSync
> h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
> 133.32KHz
> v: height 2160 start 2163 end 2168 total 2222 clock
> 60.00Hz
>
>
> With 3 screens again, but after restart:
> $ xrandr -q
> Screen 0: minimum 320 x 200, current 7253 x 3960, maximum 16384 x 16384
> eDP-1 connected primary 2880x1800+533+2160 (normal left inverted right x
> axis y axis) 302mm x 189mm
> 2880x1800 90.00*+ 60.00
> 2880x1620 59.96 59.97
> 2560x1600 59.99 59.97
> 2560x1440 59.99 59.99 59.96 59.95
> 2048x1536 85.00 75.00 60.00
> ...
> 360x200 85.04
> 320x200 85.27
> 320x180 59.84 59.32
> 320x175 85.27
> HDMI-1 disconnected (normal left inverted right x axis y axis)
> DP-1 disconnected (normal left inverted right x axis y axis)
> DP-2 disconnected (normal left inverted right x axis y axis)
> DP-3 disconnected (normal left inverted right x axis y axis)
> DP-4 disconnected (normal left inverted right x axis y axis)
> DP-3-1 disconnected (normal left inverted right x axis y axis)
> DP-3-1-1 connected 3840x2160+3413+0 (normal left inverted right x axis y
> axis) 697mm x 392mm
> 3840x2160 60.00*+ 30.00 29.97
> 2560x1440 59.95
> 1920x1080 60.00 59.94
> ...
> 800x600 72.19 75.00 60.32 56.25
> 640x480 75.00 72.81 66.67 60.00 59.94
> 720x400 70.08
> DP-3-2 connected 3414x1920+0+240 (normal left inverted right x axis y
> axis) 597mm x 336mm
> 2560x1440 59.95*+
> 1920x1080 60.00 50.00 59.94 24.00 23.98
> 1680x1050 59.88
> 1600x900 60.00
> ...
> 720x480 60.00 59.94
> 640x480 75.00 60.00 59.94
> 720x400 70.08
>
>
>
> -- System Information:
> Debian Release: trixie/sid
> APT prefers testing
> APT policy: (500, 'testing')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 6.12.6-amd64 (SMP w/12 CPU threads; PREEMPT)
> Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8),
> LANGUAGE=fr_CA:fr
> Shell: /bin/sh linked to /usr/bin/dash
> Init: systemd (via /run/systemd/system)
> LSM: AppArmor: enabled
>
> Versions of packages x11-xserver-utils depends on:
> ii cpp 4:14.2.0-1
> ii libc6 2.40-4
> ii libice6 2:1.1.1-1
> ii libx11-6 2:1.8.10-2
> ii libxaw7 2:1.0.16-1
> ii libxcursor1 1:1.2.2-1+b1
> ii libxext6 2:1.3.4-1+b3
> ii libxi6 2:1.8.2-1
> ii libxmu6 2:1.1.3-3+b4
> ii libxmuu1 2:1.1.3-3+b4
> ii libxrandr2 2:1.5.4-1+b2
> ii libxt6t64 1:1.2.1-1.2+b2
> ii libxxf86vm1 1:1.1.4-1+b4
>
> x11-xserver-utils recommends no packages.
>
> Versions of packages x11-xserver-utils suggests:
> pn cairo-5c <none>
> pn nickle <none>
> ii xorg-docs-core 1:1.7.1-1.2
>
> -- no debconf information
>
