Drew Parsons wrote: >> In Sarge, /etc/X11/XF86Config-4 had the i810-driver configured: >> >> After upgrade to etch, /etc/X11/xorg.conf was changed to use mga >> >> > > Could you tell us what your output is (on both your errant machines) from > "discover --data-path=xfree86/server/device/driver display" ? > > This is where your i810/savage is supposed to be detected. > > Is xserver-xorg-input-all installed on your savage machine? > > Does your xorg.conf get generated correctly if you run > "dpkg-reconfigure xserver-xorg" ? > > Drew > > > xserver-xorg-input-all was installed.
# discover --data-path=xfree86/server/device/driver display -bash: discover: command not found (on both machines) I also tried dpkg-reconfigure xserver-xorg: there was no autodetection (on either machine), instead I was asked to select a driver (mga was highlighted by default). During the initial upgrade, however, I didn't get that screen: I was only asked about screen-resolutions. (By the way: the upgrade was done remotely through ssh.) Why doesn't xserver-xorg use the setup from /etc/X11/XF86Config-4 which worked perfectly with XFree86? Daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
