It happens only with x86_64 / AMD64 port, before I was using x86 port and all work fine, I have an EMT64 capable processor and runs debian great, all services works fine except xserver-xorg with driver i810, let me say that the error is just when
unloading X... Using i810 driver I can use the Render, 3D accel,Composite Extension, Compiz etc but always when Shuts down the Computer I get a balnk screen with a Kernel Panic, I think to set the driver to VESA and works and shutdown without problems but haven´t DRI, 3D Accel,Composite etc. My Hardware is: - Celeron D 3.6 GHz EMT64 - ASRock 775i65G - Intel(r) 865G Chipset - Integrated Intel(r) Extreme Graphics 2 (intel 82865G Graphics) The error screen message wite some like: ********************CODE********************** [<ffffffff8004cf10>] thread_return+0x0/0xe7 [<ffffffff8004cf10>] vsf_write+0xe1/0x174 [<ffffffff8004cf10>] sys_write+0x45/0x6e [<ffffffff8004cf10>] system_call+0x7e/0x83 Code: 4c 8b 20 48 89 c7 c4 89 63 40 ff 50 08 48 89 e8 89 ea 48 ff RIP [ffffffff8028e424] __rcu_process_callbacks+0x115/0x1a8 RSP <ffffffff8004cf10> CR2: ffffffff80a324c0 <0> Kernel Panic - not syncing: Aiee, killing interrupt handler! ********************END OF CODE********************** I have put the one screenshoot here http://bp0.blogger.com/_w833IbeIZhI/RjpWdCwgHwI/AAAAAAAAAA4/h4-Lba1UnCU/s1600-h/i810+crash.jpg Here is the screenshot at widescreen (50 lines full report) mode http://bp0.blogger.com/_w833IbeIZhI/RjyYxiwgHzI/AAAAAAAAABQ/hpyIEvlesNI/s1600-h/widescreen%2Bi810%2Bcrash.jpg Mario Lopez
