Package: xserver-xorg-video-intel Version: 2:2.9.1-2 Severity: important --- Please enter the report below this line. --- When X starts the monitor immediately flashes that it is going into power saving mode, before a display manager has a chance to start. It wakes upon entering ctl-alt-F1 through ctl-alt-F6 but returns to power saving mode with control-alt-F7.
Top, etc indicates that X is in fact running. Disabling KMS solves the problem Attached is a log from one of the failed X startup attempts rather than the most recent successful one without KMS. If any further info is needed, let me know. --- System information. --- Architecture: amd64 Kernel: Linux 2.6.32-trunk-amd64 Debian Release: squeeze/sid 500 unstable mirror.csclub.uwaterloo.ca 500 unstable http.us.debian.org --- Package information. --- Depends (Version) | Installed ============================================-+-======================= libc6 (>= 2.2.5) | 2.10.2-5 libdrm-intel1 (>= 2.4.11) | 2.4.15-1 libdrm2 (>= 2.4.3) | 2.4.15-1 libpciaccess0 (>= 0.8.0+git20071002) | 0.11.0-1 libxext6 (>= 0) | 2:1.1.1-2 libxfixes3 (>= 1:4.0.1) | 1:4.0.4-1 libxv1 | 2:1.0.5-1 libxvmc1 | 2:1.0.5-1 xserver-xorg-core (>= 2:1.6.99.900) | 2:1.7.4-2 Package's Recommends field is empty. Package's Suggests field is empty. -8<---8<---8<---8<---8<---8<---8<---8<---8<-- Please attach the file: /tmp/reportbug-ng-xserver-xorg-video-intel-kPjrP7.txt to the mail. I'd do it myself if the output wasn't too long to handle. Thank you! ->8--->8--->8--->8--->8--->8--->8--->8--->8--
X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian Current Operating System: Linux bob 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=a51880f6-1f94-46e5-b75a-aca17bfb77e2 ro quiet Build Date: 20 January 2010 11:36:07PM xorg-server 2:1.7.4-2 ([email protected]) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 26 10:25:49 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "intel" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x7c1600 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2772:8086:4c43 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xe0100000/524288, 0xd0000000/268435456, 0xe0180000/262144, I/O @ 0x000020e0/8 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 0...@00:02:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945G (--) intel(0): Chipset: "945G" (II) intel(0): Output VGA1 using monitor section Configured Monitor (II) intel(0): EDID for output VGA1 (II) intel(0): Manufacturer: XXX Model: 1996 Serial#: 65740413 (II) intel(0): Year: 2005 Week: 20 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 32 vert.: 25 (II) intel(0): Gamma: 2.60 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605 (II) intel(0): blueX: 0.150 blueY: 0.065 whiteX: 0.269 whiteY: 0.290 (II) intel(0): Supported established timings: (II) intel(0): 720x...@70hz (II) intel(0): 640x...@60hz (II) intel(0): 640x...@75hz (II) intel(0): 800x...@75hz (II) intel(0): 1024x...@75hz (II) intel(0): 1280x1...@75hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) intel(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 96 kHz, PixClock max 150 MHz (II) intel(0): Monitor name: 1996F (II) intel(0): Serial No: 3519465740413 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff00631896197d1eeb03 (II) intel(0): 140f0101682019a0e800bda057499b26 (II) intel(0): 10444aa443003159455961598199a940 (II) intel(0): a94f01010101000000fd0032961e600f (II) intel(0): 000a202020202020000000fc00313939 (II) intel(0): 36460a20202020202020000000ff0033 (II) intel(0): 35313934363537343034313301010101 (II) intel(0): 0101010101010101010101010101000b (II) intel(0): EDID vendor "XXX", prod id 6550 (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA1 (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1072 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Output VGA1 connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA1 using initial mode 1024x768 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): video overlay key set to 0x101fe (**) intel(0): Display dimensions: (320, 250) mm (**) intel(0): DPI set to (81, 78) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/udev: Adding input device "Power Button" (/dev/input/event2) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) "Power Button": always reports core events (**) "Power Button": Device: "/dev/input/event2" (II) "Power Button": Found keys (II) "Power Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device "Sleep Button" (/dev/input/event1) (**) "Sleep Button": always reports core events (**) "Sleep Button": Device: "/dev/input/event1" (II) "Sleep Button": Found keys (II) "Sleep Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device "Logitech Trackball" (/dev/input/event3) (**) "Logitech Trackball": always reports core events (**) "Logitech Trackball": Device: "/dev/input/event3" (II) "Logitech Trackball": Found 3 mouse buttons (II) "Logitech Trackball": Found scroll wheel(s) (II) "Logitech Trackball": Found relative axes (II) "Logitech Trackball": Found x and y relative axes (II) "Logitech Trackball": Configuring as mouse (**) "Logitech Trackball": YAxisMapping: buttons 4 and 5 (**) "Logitech Trackball": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Logitech Trackball"" (type: MOUSE) (**) "Logitech Trackball": (accel) keeping acceleration scheme 1 (**) "Logitech Trackball": (accel) acceleration profile 0 (II) "Logitech Trackball": initialized for relative axes. (II) config/udev: Adding input device "Logitech Trackball" (/dev/input/mouse1) (**) "Logitech Trackball": always reports core events (**) "Logitech Trackball": Device: "/dev/input/mouse1" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Logitech Trackball"" (II) config/udev: Adding input device "Microsoft Comfort Curve Keyboard 2000" (/dev/input/event4) (**) "Microsoft Comfort Curve Keyboard 2000": always reports core events (**) "Microsoft Comfort Curve Keyboard 2000": Device: "/dev/input/event4" (II) "Microsoft Comfort Curve Keyboard 2000": Found keys (II) "Microsoft Comfort Curve Keyboard 2000": Configuring as keyboard (II) XINPUT: Adding extended input device ""Microsoft Comfort Curve Keyboard 2000"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device "Microsoft Comfort Curve Keyboard 2000" (/dev/input/event5) (**) "Microsoft Comfort Curve Keyboard 2000": always reports core events (**) "Microsoft Comfort Curve Keyboard 2000": Device: "/dev/input/event5" (II) "Microsoft Comfort Curve Keyboard 2000": Found 1 mouse buttons (II) "Microsoft Comfort Curve Keyboard 2000": Found scroll wheel(s) (II) "Microsoft Comfort Curve Keyboard 2000": Found relative axes (II) "Microsoft Comfort Curve Keyboard 2000": Found absolute axes (II) "Microsoft Comfort Curve Keyboard 2000": Found keys (II) "Microsoft Comfort Curve Keyboard 2000": Configuring as mouse (II) "Microsoft Comfort Curve Keyboard 2000": Configuring as keyboard (**) "Microsoft Comfort Curve Keyboard 2000": YAxisMapping: buttons 4 and 5 (**) "Microsoft Comfort Curve Keyboard 2000": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Microsoft Comfort Curve Keyboard 2000"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (EE) "Microsoft Comfort Curve Keyboard 2000": failed to initialize for relative axes. (**) "Microsoft Comfort Curve Keyboard 2000": (accel) keeping acceleration scheme 1 (**) "Microsoft Comfort Curve Keyboard 2000": (accel) acceleration profile 0 (II) "Microsoft Comfort Curve Keyboard 2000": initialized for absolute axes. (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0) (**) "Macintosh mouse button emulation": always reports core events (**) "Macintosh mouse button emulation": Device: "/dev/input/event0" (II) "Macintosh mouse button emulation": Found 3 mouse buttons (II) "Macintosh mouse button emulation": Found relative axes (II) "Macintosh mouse button emulation": Found x and y relative axes (II) "Macintosh mouse button emulation": Configuring as mouse (**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5 (**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE) (**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1 (**) "Macintosh mouse button emulation": (accel) acceleration profile 0 (II) "Macintosh mouse button emulation": initialized for relative axes. (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0) (**) "Macintosh mouse button emulation": always reports core events (**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Macintosh mouse button emulation"" (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "XXX", prod id 6550 (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz) (II) "Power Button": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "Logitech Trackball": Device reopened after 1 attempts. (II) "Microsoft Comfort Curve Keyboard 2000": Device reopened after 1 attempts. (II) "Microsoft Comfort Curve Keyboard 2000": Device reopened after 1 attempts. (II) "Macintosh mouse button emulation": Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch
