On Tue, Dec 16, 2008 at 12:59:42PM -0500, Alex Deucher wrote: > On Tue, Dec 16, 2008 at 11:43 AM, Francois Gouget <[email protected]> wrote: > > On Mon, 15 Dec 2008, Alex Deucher wrote: > > [...] > >> Thanks for tracking this down. Unforunately, the code has changed > >> significantly since then and it's not clear to me how that would have > >> affected your card. Any chance you could send me some reg dumps > >> between a working system and the non-working system? > > > > Sure. There you go: > > > > * working.dump > > This was taken with the last good driver. > > What is interesting is that doing the dump killed the DVI output... > > but not the X driver. So I was able to connect to it using x11vnc. > > > > * working-after.dump > > This is what I got when I ran radeontool again, right after the first > > run killed the DVI output. > > > > * broken.dump > > This one was done after a reboot with the latest driver I tested: > > 89a8fd53. > > > > start up X with the broken code and try this: > ./radeontool regset FP_GEN_CNTL 0x0a430085 > > That should bring the display up.
Ping? Brice -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
