Le lun, 20 mar 2000, vous, Olio avez declare : > >> > J'ai aussi une cmi8330, integr�e � la carte m�re, mais je ne comprend > pas > >> > pourquoi, quand je demande les irq, le bios en renvoi 4! > >> > >> Salut, une carte son peut en effet utiliser plusieur irq: > >> 1 pour les wav > >> 1 pour le wavetable > >> 1 pour l'emulation WSS (windows sound system , y'a des cartes qui le > font) > >> 1 pour le port midi ...blabla coup�... > Donne moi mod�le de ta carte son et marque (si elel est int�grer a la carte > m�re idem donen moi le srefs) et je te donnerais un moyean (du moins > j'essayerais) pour la faire marcher. La seule ref de la carte mere, c'est 'PC100 Mainboard' (super soket7). La carte son est effectivement int�gr� dessus, et soundconfig me la d�crit comme CMI8330/C3D. Lors du boot, si j'active l'option PNP: yes, j'ai � l'affichage le d�tail des irq de la 'carte son': card n� Device DMA IRQ 1 0 0,0 11 1 1 0,0 9 1 2 0,0 NA 1 3 1,5 5 Le probleme, c'est que ma carte SCSI est sur l'irq 5. Je ne sais pas comment lui attribuer une autre irq (ni si c'est possible) Voila donc ou j'en suis. Ci joint, si cela peut donner une id�e, le fichier /etc/isapnp.conf > Je pense que le message a ca place ici ca peut aider d'autre personne > donc pour l'instant je poste pas en priv� No probleme. Amicalement. R. Suinot -- Merci de m'avoir lu jusqu'ici. Bonne journee. linux & Falcon 030 Only! [EMAIL PROTECTED]
# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # # Trying port address 0203 # Trying port address 020b # Board 1 has serial identifier 8d 01 00 01 00 01 00 a9 0d # (DEBUG) (READPORT 0x020b) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier 8d 01 00 01 00 01 00 a9 0d) # Vendor Id CMI0001, Serial Number 16777472, checksum 0x8D. # Version 1.0, Vendor version 0.0 # ANSI string -->CMI8330/C3D Audio Adapter<-- # # Logical device id @@@0001 # Device supports vendor reserved register @ 0x39 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CMI0001/16777472 (LD 0 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0530 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0388)) # IRQ 11. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 11 (MODE +E))) # First DMA channel 0. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0530 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0388)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0fe0 # IO base alignment 16 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x03f8 # IO base alignment 16 bytes # Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0388)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # End dependent functions (NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}") # (ACT Y) )) # # Logical device id @H@0001 # Device supports vendor reserved register @ 0x38 # Device supports vendor reserved register @ 0x39 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CMI0001/16777472 (LD 1 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 1 bytes # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0330)) # IRQ 9. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 9 (MODE +E))) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 16 bytes # Number of IO addresses required: 2 # (IO 0 (SIZE 2) (BASE 0x0300)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # End dependent functions (NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}") # (ACT Y) )) # # Logical device id @P@0001 # Device supports vendor reserved register @ 0x39 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CMI0001/16777472 (LD 2 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x0200 # IO base alignment 1 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0200)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x0fe0 # IO base alignment 16 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x0200)) # End dependent functions (NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}") # (ACT Y) )) # # Logical device id @X@0001 # Device supports vendor reserved register @ 0x39 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CMI0001/16777472 (LD 3 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 1 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # IRQ 5. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 5. # 16 bit DMA only # Logical device is not a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0240 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 5 or 7. # 16 bit DMA only # Logical device is not a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 5, 6 or 7. # 16 bit DMA only # Logical device is not a bus master # DMA may not execute in count by byte mode # DMA may execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 5)) # End dependent functions (NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}") # (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY)
