Le sam, 29 jui 2000, vous avez �crit :
> Le Sat, 29 Jul 2000, vous avez �crit :
> > Merci la 7.1 j'ai enfin pu installer Linux sur mon Dell. Mais quand sous
> > windows j'ai un affichage en 1152x864x65536, sous linux avec cette
> > d�finition je n'ai que 256 couleurs! Est-ce normal? Mon �cran est un Dell
> > M770 (list� dans DrakConf).
> > Par ailleurs, sous linux je suis d�cal� de plusieurs pixels vers la gauche
> > ou vers la droite selon la r�solution choisie. Si j'ai bien compris le
> > howto ou autre document que j'ai lu � ce sujet on devrait pouvoir modifier
> > finement XF86Config pour recaler tout �a. Pourquoi �a ne parche pas tout
> > seul alors, puisque mon �cran est dans la liste?
> > QQ un a une id�e?
> >
> > ci dessous mon XF86Config
> >
> Lance xvidtune il est fait pour recaler tout ca
> >
> > # File generated by XFdrake.
> >
> > # **********************************************************************
> > # Refer to the XF86Config(4/5) man page for details about the format of
> > # this file.
> > # **********************************************************************
> >
> > Section "Files"
> >
> > RgbPath "/usr/X11R6/lib/X11/rgb"
> >
> > # Multiple FontPath entries are allowed (they are concatenated together)
> > # By default, Mandrake 6.0 and later now use a font server independent of
> > # the X server to render fonts.
> >
> > FontPath "unix/:-1"
> >
> > EndSection
> >
> > # **********************************************************************
> > # Server flags section.
> > # **********************************************************************
> >
> > Section "ServerFlags"
> >
> > # Uncomment this to cause a core dump at the spot where a signal is
> > # received. This may leave the console in an unusable state, but may
> > # provide a better stack trace in the core dump to aid in debugging
> > #NoTrapSignals
> >
> > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
> > # This allows clients to receive this key event.
> > #DontZap
> >
> > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
> > # sequences. This allows clients to receive these key events.
> > #DontZoom
> >
> > # This allows the server to start up even if the
> > # mouse device can't be opened/initialised.
> > AllowMouseOpenFail
> >
> > EndSection
> >
> > # **********************************************************************
> > # Input devices
> > # **********************************************************************
> >
> > # **********************************************************************
> > # Keyboard section
> > # **********************************************************************
> >
> > Section "Keyboard"
> >
> > Protocol "Standard"
> >
> > # when using XQUEUE, comment out the above line, and uncomment the
> > # following line
> > #Protocol "Xqueue"
> >
> > AutoRepeat 250 30
> >
> > # Let the server do the NumLock processing. This should only be
> > # required when using pre-R6 clients
> > #ServerNumLock
> >
> > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
> > #Xleds "1 2 3"
> >
> > #To set the LeftAlt to Meta, RightAlt key to ModeShift,
> > #RightCtl key to Compose, and ScrollLock key to ModeLock:
> >
> > LeftAlt Meta
> > RightAlt Meta
> > ScrollLock Compose
> > RightCtl Control
> >
> > # To disable the XKEYBOARD extension, uncomment XkbDisable.
> >
> > # XkbDisable
> >
> > # To customise the XKB settings to suit your keyboard, modify the
> > # lines below (which are the defaults). For example, for a non-U.S.
> > # keyboard, you will probably want to use:
> > # XkbModel "pc102"
> > # If you have a US Microsoft Natural keyboard, you can use:
> > # XkbModel "microsoft"
> > #
> > # Then to change the language, change the Layout setting.
> > # For example, a german layout can be obtained with:
> > # XkbLayout "de"
> > # or:
> > # XkbLayout "de"
> > # XkbVariant "nodeadkeys"
> > #
> > # If you'd like to switch the positions of your capslock and
> > # control keys, use:
> > # XkbOptions "ctrl:swapcaps"
> >
> > # These are the default XKB settings for XFree86
> > # XkbRules "xfree86"
> > # XkbModel "pc101"
> > # XkbLayout "us"
> > # XkbVariant ""
> > # XkbOptions ""
> >
> > XkbKeycodes "xfree86"
> > XkbTypes "default"
> > XkbCompat "default"
> > XkbSymbols "us(pc105)"
> > XkbGeometry "pc"
> > XkbRules "xfree86"
> > XkbModel "pc105"
> > XkbLayout "fr"
> >
> > EndSection
> >
> > # **********************************************************************
> > # Pointer section
> > # **********************************************************************
> >
> > Section "Pointer"
> > Protocol "PS/2"
> > Device "/dev/psaux"
> > Emulate3Buttons
> > Emulate3Timeout 50
> >
> > # ChordMiddle is an option for some 3-button Logitech mice
> >
> > # ChordMiddle
> >
> > EndSection
> >
> >
> >
> > # **********************************************************************
> > # Monitor section
> > # **********************************************************************
> >
> > # Any number of monitor sections may be present
> >
> > Section "Monitor"
> > Identifier "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > VendorName "Unknown"
> > ModelName "Unknown"
> >
> >
> > # HorizSync is in kHz unless units are specified.
> > # HorizSync may be a comma separated list of discrete values, or a
> > # comma separated list of ranges of values.
> > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> > # USER MANUAL FOR THE CORRECT NUMBERS.
> > HorizSync 31.5-64.3
> >
> >
> > # VertRefresh is in Hz unless units are specified.
> > # VertRefresh may be a comma separated list of discrete values, or a
> > # comma separated list of ranges of values.
> > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> > # USER MANUAL FOR THE CORRECT NUMBERS.
> > VertRefresh 50-90
> >
> >
> > # Modes can be specified in two formats. A compact one-line format, or
> > # a multi-line format.
> >
> > # These two are equivalent
> >
> > # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
> >
> > # Mode "1024x768i"
> > # DotClock 45
> > # HTimings 1024 1048 1208 1264
> > # VTimings 768 776 784 817
> > # Flags "Interlace"
> > # EndMode
> >
> > # This is a set of standard mode timings. Modes that are out of monitor spec
> > # are automatically deleted by the server (provided the HorizSync and
> > # VertRefresh lines are correct), so there's no immediate need to
> > # delete mode timings (unless particular mode timings don't work on your
> > # monitor). With these modes, the best standard mode that your monitor
> > # and video card can support for a given resolution is automatically
> > # used.
> >
> > # 640x400 @ 70 Hz, 31.5 kHz hsync
> > Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
> > # 640x480 @ 60 Hz, 31.5 kHz hsync
> > Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
> > # 800x600 @ 56 Hz, 35.15 kHz hsync
> > ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
> > # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
> > Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
> > Interlace
> >
> > # 640x400 @ 85 Hz, 37.86 kHz hsync
> > Modeline "640x400" 31.5 640 672 736 832 400 401 404 445
> > -HSync +VSync
> > # 640x480 @ 72 Hz, 36.5 kHz hsync
> > Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
> > # 640x480 @ 75 Hz, 37.50 kHz hsync
> > ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500
> > -HSync -VSync
> > # 800x600 @ 60 Hz, 37.8 kHz hsync
> > Modeline "800x600" 40 800 840 968 1056 600 601 605 628
> > +hsync +vsync
> >
> > # 640x480 @ 85 Hz, 43.27 kHz hsync
> > Modeline "640x480" 36 640 696 752 832 480 481 484 509
> > -HSync -VSync
> > # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
> > ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985
> > Interlace
> >
> > # 800x600 @ 72 Hz, 48.0 kHz hsync
> > Modeline "800x600" 50 800 856 976 1040 600 637 643 666
> > +hsync +vsync
> > # 1024x768 @ 60 Hz, 48.4 kHz hsync
> > Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806
> > -hsync -vsync
> >
> > # 640x480 @ 100 Hz, 53.01 kHz hsync
> > Modeline "640x480" 45.8 640 672 768 864 480 488 494 530
> > -HSync -VSync
> > # 1152x864 @ 60 Hz, 53.5 kHz hsync
> > Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892
> > -HSync -VSync
> > # 800x600 @ 85 Hz, 55.84 kHz hsync
> > Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657
> > -HSync -VSync
> >
> > # 1024x768 @ 70 Hz, 56.5 kHz hsync
> > Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
> > Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
> > Interlace
> >
> > # 800x600 @ 100 Hz, 64.02 kHz hsync
> > Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640
> > -HSync -VSync
> > # 1024x768 @ 76 Hz, 62.5 kHz hsync
> > Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
> > # 1152x864 @ 70 Hz, 62.4 kHz hsync
> > Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
> > # 1280x1024 @ 61 Hz, 64.2 kHz hsync
> > Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
> >
> > # 1024x768 @ 85 Hz, 70.24 kHz hsync
> > Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync
> > -VSync
> > # 1152x864 @ 78 Hz, 70.8 kHz hsync
> > Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
> >
> > # 1280x1024 @ 70 Hz, 74.59 kHz hsync
> > Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync
> > -VSync
> > # 1600x1200 @ 60Hz, 75.00 kHz hsync
> > Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync
> > +VSync
> > # 1152x864 @ 84 Hz, 76.0 kHz hsync
> > Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
> >
> > # 1280x1024 @ 74 Hz, 78.85 kHz hsync
> > Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
> >
> > # 1024x768 @ 100Hz, 80.21 kHz hsync
> > Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync
> > -VSync
> > # 1280x1024 @ 76 Hz, 81.13 kHz hsync
> > Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
> >
> > # 1600x1200 @ 70 Hz, 87.50 kHz hsync
> > Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
> > -HSync -VSync
> > # 1152x864 @ 100 Hz, 89.62 kHz hsync
> > Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
> > -HSync -VSync
> > # 1280x1024 @ 85 Hz, 91.15 kHz hsync
> > Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
> > +HSync +VSync
> > # 1600x1200 @ 75 Hz, 93.75 kHz hsync
> > Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
> > +HSync +VSync
> > # 1600x1200 @ 85 Hz, 105.77 kHz hsync
> > Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
> > +HSync +VSync
> > # 1280x1024 @ 100 Hz, 107.16 kHz hsync
> > Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
> > -HSync -VSync
> >
> > # 1800x1440 @ 64Hz, 96.15 kHz hsync
> > ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync
> > +VSync
> > # 1800x1440 @ 70Hz, 104.52 kHz hsync
> > ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync
> > +VSync
> >
> > # 512x384 @ 78 Hz, 31.50 kHz hsync
> > Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync
> > -VSync
> > # 512x384 @ 85 Hz, 34.38 kHz hsync
> > Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync
> > -VSync
> >
> > # Low-res Doublescan modes
> > # If your chipset does not support doublescan, you get a 'squashed'
> > # resolution like 320x400.
> >
> > # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
> > Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
> > Doublescan
> > # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
> > Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
> > Doublescan
> > # 320x240 @ 72 Hz, 36.5 kHz hsync
> > Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
> > Doublescan
> > # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
> > ModeLine "400x300" 18 400 416 448 512 300 301 302 312
> > Doublescan
> > # 400x300 @ 60 Hz, 37.8 kHz hsync
> > Modeline "400x300" 20 400 416 480 528 300 301 303 314
> > Doublescan
> > # 400x300 @ 72 Hz, 48.0 kHz hsync
> > Modeline "400x300" 25 400 424 488 520 300 319 322 333
> > Doublescan
> > # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
> > ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
> > Doublescan
> > # 480x300 @ 60 Hz, 37.8 kHz hsync
> > Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
> > Doublescan
> > # 480x300 @ 63 Hz, 39.6 kHz hsync
> > Modeline "480x300" 25 480 496 576 632 300 301 303 314
> > Doublescan
> > # 480x300 @ 72 Hz, 48.0 kHz hsync
> > Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
> > Doublescan
> >
> >
> > EndSection
> >
> >
> >
> > # **********************************************************************
> > # Graphics device section
> > # **********************************************************************
> >
> > Section "Device"
> > Identifier "Generic VGA"
> > Chipset "generic"
> > EndSection
> >
> > Section "Device"
> > Identifier "Intel 810 (generic)"
> > VendorName "Unknown"
> > BoardName "Unknown"
> > # VideoRam 1024
> > # Clock lines
> >
> >
> > # Uncomment following option if you see a big white block
> > # instead of the cursor!
> > #Option "sw_cursor"
> >
> > Option "power_saver"
> > EndSection
> >
> >
> >
> > # **********************************************************************
> > # Screen sections
> > # **********************************************************************
> >
> >
> > # The Colour SVGA server
> >
> > Section "Screen"
> > Driver "svga"
> > Device "Intel 810 (generic)"
> > Monitor "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > Subsection "Display"
> > Depth 8
> > Modes "1024x768" "800x600" "640x400"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 15
> > Modes "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 16
> > Modes "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 24
> > Modes "640x480"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
> >
> > Section "Screen"
> > Driver "vga16"
> > Device "Generic VGA"
> > Monitor "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > Subsection "Display"
> > Modes "640x480" "800x600"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
> >
> > Section "Screen"
> > Driver "vga2"
> > Device "Generic VGA"
> > Monitor "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > Subsection "Display"
> > Modes "640x480" "800x600"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
> >
> > Section "Screen"
> > Driver "accel"
> > Device "Intel 810 (generic)"
> > Monitor "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > Subsection "Display"
> > Depth 8
> > Modes "1024x768" "800x600" "640x400"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 15
> > Modes "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 16
> > Modes "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 24
> > Modes "640x480"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
> >
> > Section "Screen"
> > Driver "fbdev"
> > Device "Intel 810 (generic)"
> > Monitor "G�n�rique|Multi-fr�quences supportant le 1280x1024 � 60 Hz"
> > Subsection "Display"
> > Depth 8
> > Modes "default"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 15
> > Modes "default"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 16
> > Modes "default"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 24
> > Modes "default"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
> > Salutations
> >
> > Daniel Cartron
> > Tr�sorerie du S�nat
> > T�l : 01 42 34 26 59
> > Fax : 01 42 34 26 27
> --
> -------------------------------
> Tchesmeli serge , slackware 7.1
> [EMAIL PROTECTED]
> http://www.lea-linux.org
> Admin r�seau & syst�me
--
Bonjour,
Petite pr�cision, xvidtune permet de trouver les r�glages mais ne les met pas �
jour dans XF86Config. Il faut donc les noter et mettre le fichier � jour. A
moins que la 7.1 le fasse automatiquement.
Amicalement.
Jean-Bernard JACQUET
[EMAIL PROTECTED]
