Le Jeudi 9 Ao�t 2001 16:44, David SABATIE a �crit :
> Bonjour ,
> je viens d'avoir ma connection adsl et je l'ai configure sous ma LM 8.0
> avec l'outil DrakConf ( qui est d'ailleurs tres bugge pour ca ). Mon pb
> est que a la fin de la config il propose de lancer la connection au
> demarrage mais ca marche pas. Donc j'aimerai savoir comment faire.
>
> Merci
>
> David
Bonjour,
J ' ai esssuy� pas mal de d�boire avec DrakConf et je m'en suis remis � la
ligne de commande pour configurer ma connexion ADSL. Pas de crainte, c'est
tr�s simple, m�me moi, j'y suis arriv� ;-)
- Ouvrir un terminal (toutes les op�rations se font sur le compte root)
- Se connecter en root (su + mot de passe root)
- Taper adsl-setup
- R�pondre � une s�rie de questions
* * Si la connexion � �t� configur�e avec Drakconf, la plupart des r�ponses
sont d�j� reprise par d�faut
- Autoriser la sauvegarde du fichier de configuration
Une fois le fichier de configuration sauvegard�,
- pour se connecter taper adsl-start (en �tant sur le compte Root)
- pour se d�connecter taper adsl-stop
- pour connaitre les param�tres de la connection, taper adsl-connect
- pour conna�tre l' �tat de la connexion, taper adsl-status
et ... c'est tout.
Voici mon fichier de configuration
#***********************************************************************
#
# pppoe.conf
#
# Configuration file for rp-pppoe. Edit as appropriate and install in
# /etc/ppp/pppoe.conf
#
# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and
# adsl-status shell scripts. It is *not* used in any way by the
# "pppoe" executable.
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# This file may be distributed under the terms of the GNU General
# Public License.
#
# $Id: pppoe.conf,v 1.4 2001/01/26 20:29:05 dfs Exp $
#***********************************************************************
# When you configure a variable, DO NOT leave spaces around the "=" sign.
# Ethernet card connected to ADSL modem
ETH='eth0'
# ADSL user name. You may have to supply "@provider.com" Sympatico
# users in Canada do need to include "@sympatico.ca"
# Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets
# contains the right username/password combination.
# For Magma, use [EMAIL PROTECTED]
USER=''MonLogin@PLANET'
# Bring link up on demand? Default is to leave link up all the time.
# If you want the link to come up on demand, set DEMAND to a number indicating
# the idle time after which the link is brought down.
DEMAND=no
#DEMAND=300
# Obtain DNS server addresses from the peer (recent versions of pppd only)
USEPEERDNS=no
### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT
# How long adsl-start waits for a new PPP interface to appear before
# concluding something went wrong. If you use 0, then adsl-start
# exits immediately with a successful status and does not wait for the
# link to come up. Time is in seconds.
#
# WARNING WARNING WARNING:
#
# If you are using rp-pppoe on a physically-inaccessible host, set
# CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying
# to connect forever after adsl-start is called. Otherwise, it will
# give out after CONNECT_TIMEOUT seconds and will not attempt to
# connect again, making it impossible to reach.
CONNECT_TIMEOUT=30
# How often in seconds adsl-start polls to check if link is up
CONNECT_POLL=2
# Character to echo at each poll. Use PING="" if you don't want
# anything echoed
PING="."
# File where the adsl-connect script writes its process-ID.
# Three files are actually used:
# $PIDFILE contains PID of adsl-connect script
# $PIDFILE.pppoe contains PID of pppoe process
# $PIDFILE.pppd contains PID of pppd process
CF_BASE=`basename $CONFIG`
PIDFILE="/var/run/$CF_BASE-adsl.pid"
# Do you want to use synchronous PPP? "yes" or "no". "yes" is much
# easier on CPU usage, but may not work for you. It is safer to use
# "no", but you may want to experiment with "yes". "yes" is generally
# safe on Linux machines with the n_hdlc line discipline; unsafe on others.
SYNCHRONOUS=no
# Do you want to clamp the MSS? Here's how to decide:
# - If you have only a SINGLE computer connected to the ADSL modem, choose
# "no".
# - If you have a computer acting as a gateway for a LAN, choose "1412".
# The setting of 1412 is safe for either setup, but uses slightly more
# CPU power.
CLAMPMSS=1412
#CLAMPMSS=no
# LCP echo interval and failure count.
LCP_INTERVAL=20
LCP_FAILURE=3
# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
PPPOE_TIMEOUT=80
# Firewalling: One of NONE, STANDALONE or MASQUERADE
FIREWALL=STANDALONE
# Linux kernel-mode plugin for pppd. If you want to try the kernel-mode
# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
LINUX_PLUGIN=
# Any extra arguments to pass to pppoe. Normally, use a blank string
# like this:
PPPOE_EXTRA=""
# Rumour has it that "Citizen's Communications" with a 3Com
# HomeConnect ADSL Modem DualLink requires these extra options:
# PPPOE_EXTRA="-f 3c12:3c13 -S ISP"
# Any extra arguments to pass to pppd. Normally, use a blank string
# like this:
PPPD_EXTRA=""
Voici ce que donne adsl-connect
Connect: ppp1 <--> /dev/pts/3
Remote message: Proxy KPNBelgium
local IP address 212.239.172.X
remote IP address 212.239.172.y
primary DNS address 195.95.34.5
secondary DNS address 194.119.232.3
Voici ce que donne adsl-status
adsl-status: Link is up and running on interface ppp1
ppp1 Link encap:Point-to-Point Protocol
inet addr:212.239.172.X P-t-P:212.239.172.Y Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:54 (54.0 b) TX bytes:54 (54.0 b)
Enfin, pour �tre complet, je suis belge et connect� via un 'modem' externe
speedtouch, mon FAI est planetinternet et un seul pc est connect� � internet
Amicalement,
Raoul
