Bonjour a tous,

Je viens d'installer LM8.1 sur mon PC Duron 800MHz et, tout serait 
parfait s'il n'y avait pas un probleme avec ma carte Reseau .
Carte Reseau Sitecom reconnue (Centre de controle) comme une Realtek 
modele RTL-8139 avec le module rtl8139 et de type PCI.
Helas, lorsque je veux tester via le Centre de controle ma carte , 
j'obtiens:
"Modprobe: Can't locate module eth0".

Quelques tests (ping, ifconfig):
[root@terre LINUX]# ping localhost
PING localhost.localdomain (127.0.0.1) from 127.0.0.1 : 56(84) bytes of 
data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=0 ttl=255 
time=106 usec
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=255 
time=106 usec
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=255 
time=106 usec
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=255 
time=104 usec
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=4 ttl=255 
time=105 usec
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=5 ttl=255 
time=105 usec
--- localhost.localdomain ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max/mdev = 0.104/0.105/0.106/0.008 ms

[root@terre LINUX]# ifconfig
eth0      Lien encap:Ethernet  HWaddr 00:50:BF:5C:B0:61 
          inet adr:159.217.198.35  Bcast:159.217.198.255  
Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:164 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:100
          RX bytes:0 (0.0 b)  TX bytes:24217 (23.6 Kb)
          Interruption:10 Adresse de base:0x7000

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:683 errors:0 dropped:0 overruns:0 frame:0
          TX packets:683 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:141690 (138.3 Kb)  TX bytes:141690 (138.3 Kb)

J'ai alors recupere le driver Linux , et tente de le compiler mais ...

 
-rwxrwxrwx    1 root     root         5296 mai  1  2000 linux.txt*
-rwxrwxrwx    1 root     root        50793 jun 25  1999 rtl8139.c*
-rwxrwxrwx    1 root     root          256 mai  7  1999 trans*
[root@terre LINUX]# ./trans
In file included from rtl8139.c:70:
/usr/include/linux/modversions.h:1:2: #error Modules should never use 
kernel-headers system headers,
/usr/include/linux/modversions.h:2:2: #error but headers from an 
appropriate kernel-source
cp: cannot stat `./rtl8139.o': Aucun fichier ou r�pertoire de ce type

Que dois-je faire ?

Merci d'avance.
Nicolas



Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";

Répondre à