Salut les tux
Bon, �a y est j'ai achet� le scanner EPSON PERFECTION 1650 (qui d'apr�s
Mandrake est compatible).
C'est un usb.
Comme bien �videmment je ne sais par quoi commencer, et avant de faire une
boullette. Je me renseigne.
Situation:
J'ai allum� le scanner avant de d�marrer le PC (linux mandrake 8.1).
Ensuite, j'ai lanc� quelques commandes de base (trouv�es sur le site lea):
dmesg
cat /etc/modules.conf
lsmod
cat /proc/bus/usb/devices
cat /proc/bus/usb/drivers
D'apr�s les r�sulats ci-dessous (pour les 5 commandes cit�es) j'aimerai
savoir o� j'en suis avant d'installer SANE et XSANE.
J'en appelle � votre bon coeur si vous avez du temps � me concentrer.
Merci pour vos futures r�ponses.
���������������������������������������������������������
dmesg
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=307 hdd=ide-scsi devfs=mount
quiet
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 700.054 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 512520k/524224k available (1086k kernel code, 11316k reserved, 397k
data, 712k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00fbe40
PnP: PNP BIOS version 1.0, entry at f0000:be70, dseg at f0000
PnP: 14 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd4000000, mapped to 0xe0800000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:0361
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 340346kB/209274kB, 1024 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdc: CRD-8520B, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-16101B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(66)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing.....done.
Freeing initrd memory: 82k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 712k freed
Real Time Clock Driver v1.10d
Adding Swap: 401584k swap-space (priority -1)
EXT3 FS 2.4-0.9.6, 11 Aug 2001 on ide0(3,7), internal journal
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.6, 11 Aug 2001 on ide0(3,11), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.6, 11 Aug 2001 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS 2.4-0.9.6, 11 Aug 2001 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
8139too Fast Ethernet driver 0.9.18a
PCI: Found IRQ 11 for device 00:09.0
eth0: RealTek RTL8139 Fast Ethernet at 0xe0c86000, 00:50:bf:09:ea:58, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:30:17 Sep 23 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:07.3
PCI: Sharing IRQ 11 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb-uhci.c: Detected 2 ports
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: USB device 2 (vend/prod 0x4b8/0x110) is not claimed by any active
driver.
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x5a9/0xa511) is not claimed by any active
driver.
Linux video capture interface: v1.00
usb.c: registered new driver ov511
ov511.c: USB OV511+ camera found
ov511.c: camera: Creative Labs WebCam 3
ov511.c: Sensor is an OV7620
devfs: devfs_register(): device already registered: "v4l/video0"
ov511.c: v1.28:OV511 USB Camera Driver
PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Strange, can't probe Via 686A parallel port: io=0x378, irq=-1,
dma=-1
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
task `ip' exit_signal 17 in reparent_to_init
Via 686a audio driver 1.1.14b
PCI: Found IRQ 9 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 9
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
����������������������������������������������������
cat modules.conf
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias sound-slot-0 via82cxxx_audio
probeall scsi_hostadapter ide-scsi
alias eth0 8139too
����������������������������������������������������
lsmod
Module Size Used by
via82cxxx_audio 17104 0
uart401 6352 0 [via82cxxx_audio]
ac97_codec 9312 0 [via82cxxx_audio]
sound 58400 0 [via82cxxx_audio uart401]
soundcore 4208 4 [via82cxxx_audio sound]
af_packet 12560 1 (autoclean)
ip_vs 62000 0 (autoclean)
ov511 38544 0
videodev 5056 1 [ov511]
usb-uhci 21232 0 (unused)
usbcore 50752 1 [ov511 usb-uhci]
8139too 12704 1 (autoclean)
nls_iso8859-15 3408 3 (autoclean)
nls_cp850 3632 3 (autoclean)
vfat 9968 3 (autoclean)
fat 32192 0 (autoclean) [vfat]
ide-scsi 8096 0
scsi_mod 91072 1 [ide-scsi]
rtc 5600 0 (autoclean)
ext3 63084 4
jbd 39168 4 [ext3]
����������������������������������������������������
cat proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=0110 Rev= 1.10
S: Manufacturer=EPSON
S: Product=EPSON Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05a9 ProdID=a511 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 33 Ivl= 1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 129 Ivl= 1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl= 1ms
I: If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 385 Ivl= 1ms
I: If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl= 1ms
I: If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl= 1ms
I: If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 961 Ivl= 1ms
���������������������������������������������������
cat /proc/bus/usb/drivers
usbdevfs
hub
ov511
���������������������������������������������������
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
