Bonjour aux palm�s (et aux autres aussi d'ailleurs, y a pas de raisons)
En cherchant � trouver d'o� vient mon probl�me de graveur USB, j'examine
mon syslog et me pose plein de questions. Donc si quelqu'un a un peu de
temps � perdre pour m'expliquer ce serais super sympa.
Les questions li�s � ma carte r�seau (slot pcmcia)
Il me donne
- missing kernel or user mode driver tulip
alors que plus bas
kernel: Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
suivi d'un
insmod: /lib/modules/2.4.18-6mdk/kernel/drivers/net/tulip/tulip.o.gz:
init_module: No such device
modprobe: modprobe: insmod eth0 failed
Alors que le driver en question se trouve bien � cette place
Pour finir par
cardmgr[825]: socket 1: CardBus hotplug device
/etc/hotplug/pci.agent: Setup tulip for PCI slot 06:00.0
network: D�finition des param�tres r�seau : succeeded
Et ma carte r�seau fonctionne bien!! Qu'est qui se passe
Les questions pos�es par mon graveur externe USB
kernel: WARNING: USB Mass Storage data integrity not assured
Ce qui veut dire en pratique ???
modprobe: modprobe: Can't locate module scsi_hostadapter
Effectivement je ne le vois pas en /lib/modules/...
Comment cela ce fait et comment le mettre et accessoirement o�??
/etc/hotplug/usb.agent: ... no modules for USB product 0/0/0
Logique je suppose vu le pr�cedant ??
Et si je sait lire sans probl�me sur le graveur, pas moyen d'y �crire
correctement.
cdrecord 'plante' et ne fonctionne qu'au premier appel.
Si je fais un -scanbus il d�tecte le graveur mais ensuite refuse de
graver, si je grave cela marche (parfois!!) pour le premier disque mais
ensuite fini!! je dois rebooter
Je pr�cise que tout cela marchait bien sous 8.1, je n'ai pas modifi� mon
mat�riel.
Les divers
Est-ce normal qu'il essaie de charger APIC?? je pense qu'effectivement
mon ordinateur ne le supporte pas
kernel: spurious 8259A interrupt: IRQ7.
Q�k�c� �a??
Can't locate module eth1,2....
Can't locate module snd-card-1,2.....
J'ai une seule carte son et une seule carte r�seau, donc comment
l'enp�cher d'en cherhcer d'autre
C'est un peu long et peut-�tre pas facile mais je suis preneur de pistes
Merci � tous et toutes
en annexe les parties du syslog concern�
Apr 26 11:18:05 home /etc/hotplug/pci.agent: missing kernel or user mode driver tulip
Apr 26 11:18:06 home /etc/hotplug/net.agent: invoke ifup eth0
-------------------------------
Apr 26 11:18:07 home kernel: Local APIC disabled by BIOS -- reenabling.
Apr 26 11:18:07 home kernel: Could not enable APIC!
------------------------------------------------
Apr 26 11:18:07 home kernel: Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
Apr 26 11:18:07 home kernel: Linux Kernel Card Services Kernel Version
Apr 26 11:18:07 home kernel: options: [pci] [cardbus] [pm]
Apr 26 11:18:07 home kernel: PCI: Assigned IRQ 10 for device 00:0a.0
Apr 26 11:18:07 home kernel: PCI: Sharing IRQ 10 with 00:0a.1
Apr 26 11:18:07 home kernel: PCI: Found IRQ 10 for device 00:0a.1
Apr 26 11:18:07 home kernel: PCI: Sharing IRQ 10 with 00:0a.0
Apr 26 11:18:07 home kernel: Yenta IRQ list 0ad8, PCI irq10
Apr 26 11:18:07 home kernel: Socket status: 30000006
Apr 26 11:18:07 home kernel: Yenta IRQ list 0ad8, PCI irq10
Apr 26 11:18:07 home kernel: Socket status: 30000020
Apr 26 11:18:07 home kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Apr 26 11:18:07 home kernel: Vendor: HP Model: CD-Writer+ 8200 Rev: 1.0f
Apr 26 11:18:07 home kernel: Type: CD-ROM ANSI SCSI
revision: 02
Apr 26 11:18:07 home kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Apr 26 11:18:07 home kernel: cs: cb_alloc(bus 6): vendor 0x1011, device 0x0019
Apr 26 11:18:07 home kernel: PCI: Enabling device 06:00.0 (0000 -> 0003)
Apr 26 11:18:07 home kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Apr 26 11:18:07 home kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f
0x4d0-0x4d7
Apr 26 11:18:07 home kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr 26 11:18:07 home kernel: Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
Apr 26 11:18:07 home kernel: PCI: Setting latency timer of device 06:00.0 to 64
Apr 26 11:18:07 home kernel: tulip0: EEPROM default media type Autosense.
Apr 26 11:18:07 home kernel: tulip0: Index #0 - Media MII (#11) described by a 21142
MII PHY (3) block.
Apr 26 11:18:07 home kernel: tulip0: MII transceiver #1 config 1000 status 7849
advertising 01e1.
Apr 26 11:18:07 home kernel: eth0: Digital DS21143 Tulip rev 65 at 0x4800,
00:10:7A:60:93:78, IRQ 10.
Apr 26 11:18:07 home kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
tray
Apr 26 11:18:07 home kernel: WARNING: USB Mass Storage data integrity not assured
Apr 26 11:18:07 home kernel: USB Mass Storage device found at 2
---------------------------------------------
Apr 26 13:17:19 home devfsd: Started device management daemon v1.3.24 for /dev
Apr 26 13:17:20 home devfsd: error calling: symlink in GLOBAL
Apr 26 13:17:20 home rc.sysinit: Running DevFs daemon succeeded
Apr 26 13:17:20 home devfsd[64]: error calling: "unlink" in "GLOBAL"
-----------------------------------------------
Apr 26 11:17:45 home modprobe: modprobe: Can't locate module scsi_hostadapter
-----------------------------------------------
Apr 26 11:17:57 home insmod:
/lib/modules/2.4.18-6mdk/kernel/drivers/net/tulip/tulip.o.gz: init_module: No such
device
Apr 26 11:17:57 home modprobe: modprobe: insmod eth0 failed
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth1
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth2
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth3
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth4
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth5
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth6
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth7
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth8
Apr 26 11:17:57 home modprobe: modprobe: Can't locate module eth9
Apr 26 11:17:57 home init: Entering runlevel: 5
avr 26 11:17:59 home usb: Loading USB interface0 (usb-uhci) succeeded
avr 26 11:17:59 home usb: Montage du syst�me de fichiers USB succeeded
avr 26 11:18:00 home usb: Chargement du pilote de stockage USB succeeded
avr 26 11:18:00 home ipvsadm: Effacement de la table IPVS actuelle : succeeded
avr 26 11:18:00 home ipvsadm: Applique la configuration IPVS succeeded
------------------------------------------------------------
Apr 26 11:18:04 home cardmgr[825]: socket 1: CardBus hotplug device
Apr 26 11:18:05 home /etc/hotplug/pci.agent: Setup tulip for PCI slot 06:00.0
avr 26 11:18:01 home network: D�finition des param�tres r�seau : succeeded
Apr 26 11:18:01 home /etc/hotplug/usb.agent: ... no modules for USB product 0/0/0
--------------------------------------
Apr 26 11:18:09 home kernel: spurious 8259A interrupt: IRQ7.
Apr 26 11:18:09 home kernel: eth0: Setting half-duplex based on MII#1 link partner
capability of 0020.
--------------------------------------
Apr 26 11:18:19 home modprobe: modprobe: Can't locate module snd-card-1
Apr 26 11:18:20 home last message repeated 3 times
Apr 26 11:18:20 home modprobe: modprobe: Can't locate module snd-card-2
Apr 26 11:18:20 home last message repeated 3 times
Apr 26 11:18:21 home modprobe: modprobe: Can't locate module snd-card-3
Apr 26 11:18:21 home last message repeated 3 times
Apr 26 11:18:21 home modprobe: modprobe: Can't locate module snd-card-4
Apr 26 11:18:21 home kernel: lp0: compatibility mode
Apr 26 11:18:21 home modprobe: modprobe: Can't locate module snd-card-4
Apr 26 11:18:22 home last message repeated 2 times
Apr 26 11:18:22 home modprobe: modprobe: Can't locate module snd-card-5
Apr 26 11:18:22 home last message repeated 3 times
Apr 26 11:18:23 home modprobe: modprobe: Can't locate module snd-card-6
Apr 26 11:18:23 home last message repeated 3 times
-------------------------------------------------
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
