Le Vendredi 26 Juillet 2002 12:28, Jean Segers a �crit :
> jm wrote:
> > bonjour � tous,
> > J'ai un lecteur multicartes dans lequel j'ai mis une smartmedia
> > contenant des photos et un texte.
> > Ce mat�riel est bien reconnu et consid�r� comme un disque dur SCSI et
> > �tiquet� par le syst�me comme /dev/sdb (Model: SPRING MultiCard Slot
> > A010004/0). Mais impossible de monter le syst�me de fichier. La commande
> > mount -t vfat /dev/sdb /mnt/smart me renvoie :
> > mount : type fs incorrect, option incorrecte, superbloc incorrect sur
> > /dev/sdb,
> > ou trop de syst�mes de fichiers mont�s
> > Que faut-il faire pour le monter? je suis sur une Redhat 7.3.
>
> sdb s�rement pas!
> Ca serait pas plut�t sdb0 ou sdb1 ?
Justement, il n'y a pas de specification autre. si je fais :
# mount -t vfat /dev/sdb0 /mnt/smart
mount : le p�riph�rique sp�cial /dev/sdb0 n'existe pas.
et # mount -t vfat /dev/sdb1 /mnt/smart
mount : /dev/sdb1 n'est pas un p�riph�rique de bloc valide. J'ai essay� aussi
avec sda0 et sda1, et j'obtiens le m�me type de message.
ci-joint le dmesg pour info et �clairer un peu si possible:
[jm@localhost jm]$ dmesg
Linux version 2.4.18-3 ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:37:53 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda2 hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 501.145 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 513948k/524288k available (1119k kernel code, 9952k reserved, 775k
data, 280k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb150, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 992 slots per queue, batch=248
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST310212A, ATA DISK drive
hdb: WDC WD200EB-00BHF0, ATA DISK drive
hdd: SAMSUNG DVD-ROM SD-612, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19541088 sectors (10005 MB) w/512KiB Cache, CHS=1216/255/63, UDMA(66)
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
hdb: hdb1 hdb2 hdb3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 217k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
PCI: Found IRQ 5 for device 00:0b.0
ncr53c8xx: at PCI bus 0, device 11, function 0
ncr53c8xx: 53c810a detected with Symbios NVRAM
ncr53c810a-0: rev 0x23 on pci bus 0 device 11 function 0 irq 5
ncr53c810a-0: Symbios format NVRAM, ID 7, Fast-10, Parity Checking
ncr53c810a-0: restart (scsi reset).
scsi0 : ncr53c8xx-3.4.3b-20010512
Vendor: PLEXTOR Model: CD-R PX-W8220T Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: UMAX Model: Astra 1220S Rev: V1.3
Type: Scanner ANSI SCSI revision: 02
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 280k freed
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: DMA disabled
ide0: reset: success
Adding Swap: 530104k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:43:07 Apr 18 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x967/0x3124) is not claimed by any active
driver.
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x7cc/0x201) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: SPRING Model: MultiCard Slot A Rev: 0100
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 1247435290 512-byte hdwr sectors (-460824 MB)
sda: Write Protect is off
sda:<6>usb.c: USB disconnect on device 3
usb.c: ignoring set_interface for dev 3, iface 0, alt 0
hub.c: USB new device connect on bus1/2, assigned device number 4
usb-uhci.c: interrupt, status 3, frame# 1993
scsi: device set offline - not ready or command retry failed after bus reset:
host 1 channel 0 id 0 lun 0
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2
I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb dfe91bc0, burb dfe91b40
usb.c: error getting string descriptor 0 (error=-6)
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: SPRING Model: MultiCard Slot A Rev: 0100
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sdb : block size assumed to be 512 bytes, disk size 1GB.
sdb: I/O error: dev 08:10, sector 0
I/O error: dev 08:10, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi3 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: DVD-ROM SD-612 Rev: 0.1
Type: CD-ROM ANSI SCSI revision: 02
hdd: DMA disabled
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, EPSON Stylus COLOR 850
ip_conntrack (4096 buckets, 32768 max)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, EPSON Stylus COLOR 850
lp0: using parport0 (polling).
lp0: console ready
es1370: version v0.37 time 07:43:01 Apr 18 2002
PCI: Found IRQ 9 for device 00:0c.0
es1370: found adapter at io 0xec00 irq 9
es1370: features: joystick off, line in, mic impedance 0
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
Attached scsi CD-ROM sr1 at scsi3, channel 0, id 0, lun 0
ncr53c810a-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
--
#+#+#+#+#+#+#
J-M Laurent
#+#+#+#+#+#+#
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
