Le Samedi 30 Novembre 2002 11:06, Boyer Patrick a �crit :
> Bonjour � tous
> ma tablette wacom n'apas �t� prise en compte par l'install de la mdk90;
> quelqu'un a-t-il une talette qui marche avec la mdk90?
> si oui que faut-il faire?
> s'il suffit de rajouter dans: "/etc/X11/XF86Config-4" les lignes
> manquantes pour la tablette,y-a-t'il une ame charitable pour m'envoyer
> cette section manquante.
> peut-�tre que m�me un extrait de XF86Config-4 de mdk82 suffirait.
> qu'en pensez vous?
le voici pour MKD 8.2
--
La theorie, c'est quand on comprend tout mais que rien ne marche.
La pratique, c'est quand ca marche sans qu'on ne sache pourquoi.
Les ingenieurs rassemblent les deux:
rien ne marche et ils ne savent pas pourquoi. ULg
Christophe Josselin
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Stylus1"
Driver "wacom"
Option "Type" "stylus"
Option "Device" "/dev/input/event0"
Option "Mode" "Absolute"
Option "USB" "on"
EndSection
Section "InputDevice"
Identifier "Eraser1"
Driver "wacom"
Option "Type" "eraser"
Option "Device" "/dev/input/event0"
Option "Mode" "Absolute"
Option "USB" "on"
EndSection
Section "InputDevice"
Identifier "Cursor1"
Driver "wacom"
Option "Type" "cursor"
Option "Device" "/dev/input/event0"
Option "Mode" "Relative"
Option "USB" "on"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|Multi-fr�quences supportant le 1280x1024 � 74 Hz"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "Matrox Millennium G400"
VendorName "Unknown"
BoardName "Unknown"
Driver "mga"
VideoRam 32768
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "Matrox Millennium G400"
Monitor "Generic|Multi-fr�quences supportant le 1280x1024 � 74 Hz"
DefaultFbBpp 32
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Stylus1" "AlwaysCore"
InputDevice "Eraser1" "AlwaysCore"
InputDevice "Cursor1" "AlwaysCore"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
