Bonjour,
j'ai de nouveau un pb avec ce scanner (qui fonctionnait bien il y a un
mois).
Suite � un changement de mat�riel (CM, proc et mem) l'�mulation scsi de
mon scanner usb semble ne pas fonctionner.
recap :
Matos : HP Scanjet 5300C USB (� utiliser le backend d'AVISION)
CM : MSI-K7D-MASTER.
autre matos usb : speedtouch alcatel : pas de pb !!!!
less /proc/scsi/scsi :
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: 23.D
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: RICOH Model: DVD/CDRW MP9060 Rev: 1.80
Type: CD-ROM ANSI SCSI revision: 02
Donc je vois bien � ce niveau que mon scanner usb n'est pas reconnu en
tant que tel (rmq : mon speedtouch alcatel non plus).
less /proc/bus/usb/devices :
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=e0893000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06b9 ProdID=4061 Rev= 0.00
S: Manufacturer=ALCATEL
S: Product=Speed Touch USB
S: SerialNumber=0090D01327E3
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 50ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs
I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0701 Rev= 0.01
S: Product=Hewlett Packard
S: SerialNumber=TW9CH13632ME
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
la il semble que mon hub usb (i.e.les ports usb de ma b�cane), mon
speedtouch et mon scanner sont bien vus !!!
less /proc/bus/usb/driver :
usbdevfs
hub
pour info :-).
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
de nouveau pour info :-|
et sane-find-scanner -v :
sane-find-scanner: searching for SCSI scanners:
sane-find-scanner: checking /dev/scanner... failed to open
sane-find-scanner: checking /dev/sg0... open ok
sane-find-scanner: found SCSI disk "IOMEGA ZIP 100 23.D" at device
/dev/sg0
sane-find-scanner: checking /dev/sg1... open ok
sane-find-scanner: found SCSI CD-drive "RICOH DVD/CDRW MP9060 1.80" at
device /dev/sg1
sane-find-scanner: checking /dev/sg2... failed to open
sane-find-scanner: checking /dev/sg3... failed to open
sane-find-scanner: checking /dev/sg4... failed to open
sane-find-scanner: checking /dev/sg5... failed to open
sane-find-scanner: checking /dev/sg6... failed to open
sane-find-scanner: checking /dev/sg7... failed to open
sane-find-scanner: checking /dev/sg8... failed to open
sane-find-scanner: checking /dev/sg9... failed to open
sane-find-scanner: checking /dev/sga... failed to open
sane-find-scanner: checking /dev/sgb... failed to open
sane-find-scanner: checking /dev/sgc... failed to open
sane-find-scanner: checking /dev/sgd... failed to open
sane-find-scanner: checking /dev/sge... failed to open
sane-find-scanner: checking /dev/sgf... failed to open
sane-find-scanner: checking /dev/sgg... failed to open
sane-find-scanner: checking /dev/sgh... failed to open
sane-find-scanner: checking /dev/sgi... failed to open
sane-find-scanner: checking /dev/sgj... failed to open
sane-find-scanner: checking /dev/sgk... failed to open
sane-find-scanner: checking /dev/sgl... failed to open
sane-find-scanner: checking /dev/sgm... failed to open
sane-find-scanner: checking /dev/sgn... failed to open
sane-find-scanner: checking /dev/sgo... failed to open
sane-find-scanner: checking /dev/sgp... failed to open
sane-find-scanner: checking /dev/sgq... failed to open
sane-find-scanner: checking /dev/sgr... failed to open
sane-find-scanner: checking /dev/sgs... failed to open
sane-find-scanner: checking /dev/sgt... failed to open
sane-find-scanner: checking /dev/sgu... failed to open
sane-find-scanner: checking /dev/sgv... failed to open
sane-find-scanner: checking /dev/sgw... failed to open
sane-find-scanner: checking /dev/sgx... failed to open
sane-find-scanner: checking /dev/sgy... failed to open
sane-find-scanner: checking /dev/sgz... failed to open
sane-find-scanner: searching for USB scanners:
sane-find-scanner: checking /dev/usb/scanner... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner0... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner1... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner2... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner3... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner4... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner5... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner5... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner7... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner8... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner9... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner10... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner11... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner12... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner13... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner14... failed to open (status
4)
sane-find-scanner: checking /dev/usb/scanner15... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner... failed to open (status 4)
sane-find-scanner: checking /dev/usbscanner0... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner1... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner2... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner3... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner4... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner5... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner6... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner7... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner8... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner9... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner10... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner11... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner12... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner13... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner14... failed to open (status
4)
sane-find-scanner: checking /dev/usbscanner15... failed to open (status
4)
sane-find-scanner: done
de nouveau pour info :-(.
J'aimerais bine y arriver � qqch vu que c'est le dernier p�riph�rique
qui reste � faire fonctionner sur ma machine (apr�s un alcatel
speedtouch usb, un usrobotics 56k professional message modem, un hp
930C).
Merci d'avance.
nb : le pb semble �tre la gestion du bus usb (OHCI au lieu de uhci sur
l'ancienne carte) et donc l'�mulation scsi est-elle n�cessaire ????
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
