Bonjour,
j'ai encore des pb pour graver :
voci le msg que j'ai lorsque j'essaie de graver une image iso (la knoppix en
l'occurence) :
[EMAIL PROTECTED] new]# cdrecord -v -dao speed=4 dev=0,1,0
/mnt/win_d/new/KNOPPIX_V3.1-2003-01-20-EN.iso
Cdrecord 1.11a31 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.6'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'RICOH '
Identifikation : 'DVD/CDRW MP9060 '
Revision : '1.80'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1310720 = 1280 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 698 MB
Total size: 802 MB (79:31.62) = 357872 sectors
Lout start: 803 MB (79:33/47) = 357872 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359848 (79:59/73)
speed low: 4 speed high: 8
power mult factor: 1 5
recommended erase/write power: 5
A2 values: 00 00 00
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 1976
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 90 82 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x90 Qual 0x82 (vendor unique sense code 0x90) [No matching qualifier] Fru
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
cdrecord: OPC failed.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Pourtant un scanbus me donne :
[EMAIL PROTECTED] new]# cdrecord -scanbus
Cdrecord 1.11a31 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'IOMEGA ' 'ZIP 100 ' '23.D' Removable Disk
0,1,0 1) 'RICOH ' 'DVD/CDRW MP9060 ' '1.80' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
et pour mon CD :
[EMAIL PROTECTED] new]# cdrdao disk-info --device 0,1,0
Cdrdao version 1.1.5 - (C) Andreas Mueller <[EMAIL PROTECTED]>
SCSI interface library - (C) Joerg Schilling
L-EC encoding library - (C) Heiko Eissfeldt
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.5'
0,1,0: RICOH DVD/CDRW MP9060 Rev: 1.80
Using driver: Generic SCSI-3/MMC - Version 1.2 (options 0x0010)
That data below may not reflect the real status of the inserted medium
if a simulation run was performed before. Reload the medium in this case.
CD-RW : yes
Total Capacity : 79:57:73 (359848 blocks, 702/807 MB)
CD-R medium : INFODISC Technology Co., Ltd.
Long Strategy Type, e.g. Cyanine
Recording Speed : 0X - 8X
CD-R empty : yes
Donc mon CD-RW de 700 Mo est bien reconnu en tant que CD-RW et vide !!!!
mais pas de possibilit� de graver sur ce CD !!!!
HELP !!!
J'ai besoin de redimensionner mais partitions linux , mais pour cela j'ai des donn�es
� sauvegarder sur les partitions windows avant de les effacer.
je suis coinc� la !!
Merci
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
