Le ven 30/05/2003 � 16:12, doux.patrick a �crit :
> Andr� Sala�n writes: 
> 
> > Le jeu 29/05/2003 � 21:21, doux.patrick a �crit :
> >> Bonjour � tous  
> >> 
> >>    J'ai un souci pour pas dire plusieurs avec ce foutu scanner Epson
> >> perfection (j'en doute) 660. J'avais installer la Mdk9.1 � partir de la
> >> distrib t�l�chargeable et mon scanner �tait reconnu; oui mais pas longtemps
> >> car au bout de trois ou quatre boots scannerdrake le disait "avalable" sur
> >> mon ordinateur mai xsane n'en voulait plus. Maintenant j'ai install� la Mdk
> >> 9.1 � partir de la distrib trouv�e dans la revue Linux cd et cette fois ci
> >> m�me scannerdrake ne le reconn�it plus, il r�pond qu'il n'y a pas de scanner
> >> sur mon ordi.  
> >> 
> >> quelqu'un a t'il une id�e pour me sortir de ce foutoir.  
> >> 
> >> merci beaucoup 
> > Peut-on voir /etc/sane.d/"fichier du scanner"
> > -- 
> > A. Sala�n
> 
> #------------------------------ General ----------------------------------- 
> 
> # Change to the fully qualified filename of your firmware file, if
> # firmware upload is needed by the scanner
> firmware /path/to/your/firmware/file.bin 
> 
> # If not automatically found you may manually specify a device name. 
> 
> # For USB scanners also specify bus=usb, e.g.
> # /dev/usb/scanner0 bus=usb 
> 
> # For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
> # /dev/sg0 
> 
> #---------------------------------------------------------------------------
> # No changes should be necessary below this line
> #--------------------------------------------------------------------------- 
> 
> #-------------------------- SCSI scanners ----------------------------------
> # These SCSI devices will be probed automatically
> scsi AGFA * Scanner
> scsi COLOR * Scanner
> scsi Color * Scanner
> scsi ACERPERI * Scanner 
> 
> #--------------------------- USB scanners 
>  -----------------------------------
> # These USB devices will be probed automatically
> # (This will currently work only on Linux) 
> 
> # Benq/Acer/Vuego 310U
> usb 0x04a5 0x1a20 
> 
> # Benq/Acer/Vuego 320U
> usb 0x04a5 0x2022 
> 
> # Benq/Acer/Vuego 620U / 620UT
> usb 0x04a5 0x1a2a
> usb 0x04a5 0x2040 
> 
> # Benq/Acer/Vuego 640U
> usb 0x04a5 0x2060 
> 
> # Benq/Acer/Vuego 640BU
> usb 0x04a5 0x207e 
> 
> # Benq/Acer/Vuego 1240U
> usb 0x04a5 0x20c0 
> 
> # Benq/Acer/Vuego 3300 / 4300
> usb 0x04a5 0x20b0 
> 
> # Benq/Acer/Vuego 4300
> usb 0x04a5 0x20de 
> 
> # Benq/Acer/Vuego 5000
> usb 0x04a5 0x20fc 
> 
> # Benq/Acer/Vuego 5300
> usb 0x04a5 0x20fe 
> 
> # Agfa 1236U
> usb 0x06bd 0x0002 
> 
> # Agfa 1212U
> usb 0x06bd 0x0001
> usb 0x06bd 0x2061 
> 
> # Agfa Snapscan e10
> usb 0x06bd 0x2093 
> 
> # Agfa Snapscan e20
> usb 0x06bd 0x2091 
> 
> # Agfa Snapscan e25
> usb 0x06bd 0x2095 
> 
> # Agfa Snapscan e26
> usb 0x06bd 0x2097 
> 
> # Agfa Snapscan e40
> usb 0x06bd 0x208d 
> 
> # Agfa Snapscan e42
> usb 0x06bd 0x20ff 
> 
> # Agfa Snapscan e50
> usb 0x06bd 0x208f 
> 
> # Agfa Snapscan e52
> usb 0x06bd 0x20fd 
> 
> # Epson Perfection 660
> usb 0x04b8 0x0114 
> 
> 
> Voici maintenant le contenu de Epson.conf 
> 
> 
> # epson.conf
> #
> # here are some examples for how to configure the EPSON backend
> #
> # SCSI scanner:
> scsi EPSON
> #
> # Parallel port scanner:
> #pio 0x278
> #pio 0x378
> #pio 0x3BC
> #
> # USB scanner:
> #
> # Auto-detection of models known to the "epson" backend
> usb
> #
> # Auto-detection of model specified by vendor/product (example is Epson
> # Perfection 2450, use "lsusb" or "sane-find-scanner" to get the IDs of
> # your scanner model)
> #usb 0x04b8 0x0112
> #
> # Selection of scanner by device special file
> #             only enable this if you have an EPSON scanner. It could
> #               otherwise block your non-EPSON scanner from being
> #               recognized.
> #             Depending on your distribution, you may need either the
> #             first or the second entry.
> #usb /dev/usbscanner0
usb /dev/usb/scanner0 ---> s'il est usb il devrait fonctionner sous ce device avec 
devfs activ� : essaie de d�commenter cette ligne comme ceci.
quand tu lances XSane tu devrais voir appara�tre un "scanner0" sous
/dev/usb (s'il n'y est pas d�j�)


-- 
A. Sala�n

Attachment: signature.asc
Description: PGP signature

Répondre à