Le Dimanche 6 Juillet 2003 14:35, Jeff nous disait :
> Alors pourquoi cherche-t-il � monter un disque SCSI en dev 8,0,0 ?
>
> > I/O error: dev 08:00, sector 0
> > ldm_validate_partition_table(): Disk read failed.
> > I/O error: dev 08:00, sector 0
>
> Apr�s bien s�r il gueule parce qu'il ne le trouve pas :
> > Device not ready. Make sure there is a disc in the drive.
> > VFS: Disk change detected on device 08:00
> > sda : READ CAPACITY failed.
>
> Et ce qu'il assimile � un disque de 1 Go c'est quoi ? Un dvd
> r�inscriptible en plus du cdrom qui aurait �t� l� lors de l'install ?
>
> Additional sense indicates Medium not present
> sda : block size assumed to be 512 bytes, disk size 1GB.
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 2097144
> I/O error: dev 08:00, sector 2097144
> I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0> I/O error: dev 08:00, sector 0
>
> Voil� de quoi r�fl�chir, cette fois ci je m'en vais :-)
>
> JEff
Merci Jeff et bone fin d'AM,
Je crois que ce qu'il assimile � un DD scsi, est en fait le Zip ide �mul�
scsi, et comme celui-ci ne contiend pas de disquette au d�marage, c'est
peut-�tre l'origine de cette alerte!
Quoiqu'il en soit et aussi �trange que �a puisse para�tre, tout est revenu
dans l'ordre, sauf �videmment pour le Zip, ou suppos� tel, la seul chose que
j'ai fa�te est de supprimer, car je ne l'utilisais pas, une carte modem pci,
et j'en ai profit� pour faire un d�poussi�rage, ce qui n'�tait pas du luxe!
;-)
Voici le dernier message:
[EMAIL PROTECTED] alkiros]$ dmesg
32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1007.4174 MHz.
..... host bus clock speed is 100.7416 MHz.
cpu: 0, clocks: 1007416, slice: 503708
CPU0<T0:1007408,T1:503696,D:4,S:503708,C:1007416>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Enabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hda: DMA disabled
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
hdc: WDC AC26400B, ATA DISK drive
hdd: ASUS DVD-ROM E616, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
blk: queue c03cb86c, I/O limit 4095Mb (mask 0xffffffff)
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100)
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
hdc: host protected area => 1
hdc: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=13328/15/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus1/target0/lun0:<6> [PTBL] [784/255/63] p1 p2 < p5 p6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 267k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 10 for device 00:0f.0
ahc_pci:0:15:0: Host Adapter Bios disabled. Using default SCSI device
parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: TEAC Model: CD-R55S Rev: 1.0Q
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.3
PCI: Sharing IRQ 10 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Adding Swap: 401584k swap-space (priority -1)
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IOMEGA Model: ZIP 100 Rev: 23.D
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
unable to read partition table
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
reiserfs: checking transaction log (device 16:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
sr0: scsi-1 drive
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PCI: Found IRQ 10 for device 00:07.5
PCI: Setting latency timer of device 00:07.5 to 64
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr
19 17:46:46 PDT 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xe0000000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
PPP BSD Compression module registered
PPP Deflate Compression module registered
[EMAIL PROTECTED] alkiros]$
Ce que je ne comprend pas, c'est pourquoi il r�p�te autand de fois le m�me
message d'erreur?
J'essairais au prochain reboot de mettre une disquette dans le Zip pour voir
si mes d�ductions sont bonnes.
Encore merci
--
Astromicalement
Alain
St.Pargoire 34
Merci de ne pas m'envoyer de textes au format Word (.doc), mais plut�t en .txt
ou .pdf, ou mieux, au format libre OpenOffice.Org (.sxw)
Document �crit sur un ordinateur pilot� par l' O.S libre Linux Mandrake 9.1
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";.
Foire Aux Questions de la liste : http://mdk.mondelinux.org
