Le Dimanche 28 Mai 2006 14:14, Nicolas Lécureuil a écrit:
>
> on dirait qu'il se met pas correctement,
>
> que donne ls /dev/sd* ?
Oh, attend, attend, il vient de s'y mettre!!!!
j'ai relancé dmesg juste après et voici la fin (une fois monté)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
usb 4-5: USB disconnect, address 3
usb 4-5: new high speed USB device using ehci_hcd and address 4
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 4-5: USB disconnect, address 4
usb 4-5: new high speed USB device using ehci_hcd and address 5
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
usb 4-5: reset high speed USB device using ehci_hcd and address 5
scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0
lun 0
usb-storage: device scan complete
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
usb 4-5: USB disconnect, address 5
usb 4-5: new high speed USB device using ehci_hcd and address 6
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Vendor: Maxtor 6 Model: Y120L0 Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: assuming drive cache: write through
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: assuming drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
--
Les Bestioles en WouaB:
http://www.bertrand.vuarnesson.com/
=========================================
Vous souhaitez acquerir votre Pack ou des Services Mandriva?
Rendez-vous sur "http://store.mandriva.com";.
Rejoignez le club mandrake : http://www.mandrivaclub.com
=========================================
