Christophe Gaubert a écrit :
Le 11/08/06, Jean-Yves LE GOFF <[EMAIL PROTECTED]> a écrit :
Je voudrais savoir si les problèmes que l'on a avec cdrecord et les
cdrw (en particulier pour les effacer) viennent de la version
spécialement préparée par warly de mandriva ou bien c'est un problème
général ?
Je trouve que c'est vraiment dommage parce que maintenant ces CD-RW
sont vraiment bon marché et c'est intéressant de pouvoir effacer ces
petits cd qui me servent souvent pour mettre des distros à essayer en
live CD
Quels problèmes rencontres-tu ? K3B me les efface sans problème
(2006 free)...
En fait, c'est simple : je n'ai jamais pu effacer de CDRW.
K3B refuse de me les effacer.
pourtant c'est un cdrw de marque TDK
message de k3b/cdrecord:
«System
-----------------------
K3b Version: 0.12.10
KDE Version: 3.4.2
QT Version: 3.3.4
Kernel: 2.6.12-24mdk-i686-up-4GB
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4081B A100 (/dev/hdc, ) at /mnt/cdrom [CD-R; CD-RW;
CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R
séquentiel; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel;
DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R;
RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=10 -tao
driveropts=burnfree -eject blank=fast -force
cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C)
1995-2005 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to warly at mandriva.com.
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4081B'
Revision : 'A100'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 7810 kB/s 44x CD 5x DVD
/usr/bin/cdrecord: Trying to use ultra high speed+ medium on a writer
which is not
compatible with ultra high speed+ media.
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Speed set to 1764 KB/s»
begin:vcard
fn:Jean-Yves LE GOFF
n:LE GOFF;Jean-Yves
email;internet:[EMAIL PROTECTED]
tel;fax:(687) 26 90 53
tel;home:(687)26 90 53
version:2.1
end:vcard
=========================================
Vous souhaitez acquerir votre Pack ou des Services Mandriva?
Rendez-vous sur "http://store.mandriva.com";.
Rejoignez le club mandrake : http://www.mandrivaclub.com
=========================================
