* Processor load: sometimes for minutes a processor load of 100% (lots of
declude.exe, avgscan.exe and like l08w987.exe (from sniffer) processes) > >a 
System process that fills up to 100%. In those periods there is no System
Idle processor time.

Does not really indicate a probelm per say. In general some options you can look at is AVAFTERJM and run Virus checking after Spam Filtering I have seen this help some servers a lot that were running multiple scanners that were very cpu intensive. What is your mail volume? This is important since you only have a P3 1GHZ.

* Recv.blocking call cancelled: it seems that to particular domains we get
recv.blocing call cancelled after a few minutes or MX connect failed. What
could be the problem? When I do a speedtest(.nl) from this server the
(upload) speed is very low compared to other servers, in the same network
segment at the same backbone, behind the same firewall.

This can be a whole slew of things from NIC speed/duplex settings. If you are seeing poor performance on the speed tests I would check your settings on the card and switch to make sure you are not suffering from a mismatch.
* Need to upgrade declude? Current version in use is 1.79
Yes - earlier versions of Declude have issues with 8.2x. Right now 3.0 for Declude is in beta and is suppose to fix the 8.2 incompatibilities.
* Need to upgrade AVG or F-Prot (7.0.344 and F-Prot 3.15)
Not sure on AVG, but their are newer versions of F-Prot.
* Advise to use other virusscanners in combination with Imail & Declude
Virus?

The two you have are fine.
* Sniffer (Sortmonster) uses lots of processor load? Also at your place?
It uses about 20%, but for VERY SHORT periods. Nothing out of the ordinary. Also, look into using the persistent version of sniffer this really helps out in higher volume servers. Darrell
------------------------------------------------------------------------
Check out http://www.invariantsystems.com for utilities for Declude And Imail. IMail/Declude Overflow Queue Monitoring, SURBL/URI integration, MRTG Integration, and Log Parsers.

---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.

Reply via email to