Thank you Chris. I just disabled it and will watch it. It's been up now 4 hrs so if it follows any pattern, it should fail around now.
I upgraded the drivers already as they were 2 yrs old so maybe that helps too. much appreciated. -jason - - - - - - - - - - - - - - - - - - > Friday, November 25, 2005, 1:15:47 PM, you wrote: CU> It *shouldn't* be a problem, but having the 2nd NIC in the machine (we also CU> use Poweredge) and not having it plugged in can have an effect on things at CU> times. CU> It isn't enough to leave it unplugged - go into Control Panel - Network, CU> select the second port, right click and DISABLE it. CU> This actually addressed a few occasional funky network "lockups" CU> - Chris CU> At 09:26 AM 11/25/2005, you wrote: >>I just moved colos and servers. >> >>On the new(er) box, I installed Imail 8.21, Sniffer, Declude 3.0.5.20 >>Pro-Virus/JM. >> >>Box is Dell Poweredge 1750, Dual Proc Xeon 2.4 Ghz, 3x73Gb Raid5, >>Nics onboard (Broadcom Gigs, dual) >> >>So far, I like the newer Declude - we were using 1.82 on Imail 8.05. >>It was nice to get a clean start ... >> >> >>HOWEVER, I am having problems after moving server into production and >>into live performance. The box seems to lose connectivity and I have >>to hard reboot it to get ability of the network to come back up. >> >>There's no messages in the EVENT VIEWER - nada. >> >>I know IMAIL had issues a long time ago with certain NICS - does >>anyone know the status of that? >> >>I am thinking it has to be the NIC I am using - the onboard Broadcom. >>So, I updated the drivers to it and thinking that might help. >> >>If not, I'll try the 2nd onboard and hoping it will help. >> >>Next thing to try is IF I can get a nic in the box, I'll try that but >>unsure if I have room. >> >>Last will be putting new box in there and doing all this over again. >> >> >>I don't think my Declude is causing it... anyone have thoughts on >>this. >> >> >>Thanks. -jason >> >>- - - - - - - - - - - - - - - - - - > >>Thursday, November 24, 2005, 12:24:22 PM, you wrote: >> >>IA> I just realized I hadn't seen any new versions of Declude in a while, >>and I >>IA> wonder if that means it's finally stable. We wanted to upgrade to >>3.x, but >>IA> it seems like there were so many errors being reported here, and new >>IA> iterations being released every few days. We prefer to wait until the >>smoke >>IA> clears. So what do people think now? Is 3.x fully reliable now? >> >>IA> Thanks, and Happy Thanksgiving, >> >>--- >>This E-mail came from the Declude.Virus mailing list. To >>unsubscribe, just send an E-mail to [EMAIL PROTECTED], and >>type "unsubscribe Declude.Virus". The archives can be found >>at http://www.mail-archive.com. CU> --- CU> This E-mail came from the Declude.Virus mailing list. To CU> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and CU> type "unsubscribe Declude.Virus". The archives can be found CU> at http://www.mail-archive.com. --- This E-mail came from the Declude.Virus mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.Virus". The archives can be found at http://www.mail-archive.com.
