Robert
Thanks for the suggestion but had already tried that and it makes not a
blind bit of difference. Very frustrating.
The nature of the fuzziness is, there is some text in a light font (ie thin
lines) and this text shows shadowing.
I feel that the clue to this is the difference in apparent sizes
The natural print size for this image from PhotoPaint is only 30x30mm
while the TQRImage (with autosize set True) is trying to print it at
120x120mm. It's when I have to reduce it's print size that I suspect the
blurring is ocurring.
Anybody??
Mark
On 9 Aug 2002 at 11:08, Robert Martin wrote:
> I don't use QR but have you tried loading the image into report in dev
> mode and not using loadFromFile. The quality of the image may not be
> quite as good as that of a proper image application but it should be
> pretty good.
>
> Rob
>
> Software engineer
> Wild Software Ltd
> Ph 03 338-1407
> ----- Original Message -----
> From: "Mark Howard" <[EMAIL PROTECTED]>
> To: "Multiple recipients of list delphi" <[EMAIL PROTECTED]>
> Sent: Friday, August 09, 2002 11:04 AM
> Subject: Re: [DUG]: Graphic in QR
>
>
> > Nope - no better.
> > Should it make any difference whether I load a .GIF vs .BMP?
> > As I said before, with the settings I have used it doesn't make any
> > visible difference. Am I right in assuming that I SHOULD be able to
> > get the same print definition from a TQRImage as I get from
> > PhotoPaint? Any suggestions will be pounced upon. Mark On 9 Aug 2002
> > at 9:55, Robert Martin wrote:
> >
> > > You should Set AutoSize to true and Stretch to False. The Stretch
> > > is most likely causing the fuzziness.
> > >
> > > An interesting Note my original reply was "Set AutoSize to true
> > > and Stretch to False. The Stretch is most likely causing the
> > > fuzziness." but this gets rejected by the list server because it
> > > starts with Set.
> > >
> > > Rob
> > >
> > > Software engineer
> > > Wild Software Ltd
> > > Ph 03 338-1407
> > > ----- Original Message -----
> > > From: "Mark Howard" <[EMAIL PROTECTED]>
> > > To: "Multiple recipients of list delphi" <[EMAIL PROTECTED]>
> > > Sent: Friday, August 09, 2002 8:41 AM Subject: [DUG]: Graphic in
> > > QR
> > >
> > >
> > > > Hi from a graphics novice
> > > >
> > > > I have a company logo in a BMP file.
> > > >
> > > > When I print this out from Corel PhotoPaint, straight with no
> > > > scaling or anything, it prints crisply with a size of about 30mm
> > > > x 30mm.
> > > >
> > > > I then drop a TQRImage onto a QuickReport band and do
> > > > LogoImage.Picture.Bitmap.LoadFromFile('Logo.bmp');
> > > > with Autosize set to true
> > > > and Stretch set to True
> > > >
> > > > It tries to print it at about 120 x 120 mm
> > > >
> > > > If I then set Autosize to False and set the LogoImage height and
> > > > width to 30mm It prints fuzzy - not half as clear as the same
> > > > file printed from PhotoPaint.
> > > >
> > > > Does anyone have any experience that will help me with this?
> > > >
> > > > I have tried saving the image in GIF format, with the same
> > > > results.
> > > >
> > > > TIA
> > > >
> > > > Mark
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ----------------------------------------------------------------
> > > > ---- ------
> > > -
> > > > New Zealand Delphi Users group - Delphi List -
> > > > [EMAIL PROTECTED]
> > > > Website: http://www.delphi.org.nz
> > > > To UnSub, send email to: [EMAIL PROTECTED]
> > > > with body of "unsubscribe delphi"
> > > > Web Archive at:
> > > > http://www.mail-archive.com/delphi%40delphi.org.nz/
> > > >
> > >
> > >
> > > ------------------------------------------------------------------
> > > ---- -----
> > > New Zealand Delphi Users group - Delphi List -
> > > [EMAIL PROTECTED]
> > > Website: http://www.delphi.org.nz
> > > To UnSub, send email to: [EMAIL PROTECTED]
> > > with body of "unsubscribe delphi"
> > > Web Archive at:
> > > http://www.mail-archive.com/delphi%40delphi.org.nz/
> > >
> >
> >
> > --------------------------------------------------------------------
> > ------
> -
> > New Zealand Delphi Users group - Delphi List -
> > [EMAIL PROTECTED]
> > Website: http://www.delphi.org.nz
> > To UnSub, send email to: [EMAIL PROTECTED]
> > with body of "unsubscribe delphi"
> > Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> >
>
>
> ----------------------------------------------------------------------
> -----
> New Zealand Delphi Users group - Delphi List -
> [EMAIL PROTECTED]
> Website: http://www.delphi.org.nz
> To UnSub, send email to: [EMAIL PROTECTED]
> with body of "unsubscribe delphi"
> Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
>
---------------------------------------------------------------------------
New Zealand Delphi Users group - Delphi List - [EMAIL PROTECTED]
Website: http://www.delphi.org.nz
To UnSub, send email to: [EMAIL PROTECTED]
with body of "unsubscribe delphi"
Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
