Button.ClientOrigin.X Button.ClientOrigin.Y These properties give you the top-left cordinates of the component on the screen
You could do something like this: PopUpMenu.PopUp( Button.ClientOrigin.X, Button.ClientOrigin.Y + Button.Height ); That worked with me. Hope I helped ya ! ----- Original Message ----- From: "Robert Meek" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, January 04, 2006 8:28 PM Subject: Manual placement of popup menus D2006 Win32 > I need some help on this one! What I have is a bank of BitBtn's > stacked vertically in a Panel so that it looks a lot like a groupbar. And > before you ask, I tried handling this using a real groupbar, however it > couldn't provide for other needs I have of it. And so I decided to throw > one together as I'm now doing. > Anyway, these bitbtn's have a width of 116. And what I need is for > a popup menu to appear beneath it with it's left edge aligned to the left > edge of the bitbtn, and having the same exact width as the bitbtn. Provided > there is enough room for the entire menu to be displayed when it pops up, it > will do so beneath the bitbtn with it's top edge no more than a pixel lower > than the bottom edge of the bitbtn. And if there isn't enough room, then I > want it to appear above the bitbtn, with the same alignments. > I know I can use the menu's OnPopUp event but how do I position and > set the width properly...and how do I determine if the menu should be > displayed above or below it's bitbtn? Thanx in advance! > > from Robert Meek dba Tangentals Design > > > > _______________________________________________ > Delphi mailing list -> [email protected] > http://www.elists.org/mailman/listinfo/delphi _______________________________________________ Delphi mailing list -> [email protected] http://www.elists.org/mailman/listinfo/delphi
