Just some feedback on this question from a month ago and thanks to those who responded with suggestions.
It turned out that my app had the Printer Tray set to First in every single one of my reports. I don't know why it was set to First, and I have no recollection of ever setting it thus - maybe that was the default in D3?? When I set it to Auto, the problem went away. BUT this is the first time in 5 + years in around 30 sites that a printer has complained about the Tray being set to First. (Just goes to show - thers a First time for everything!) Mark On 21 Jan 2004 at 13:25, James Sugrue wrote: > Are you sure its not something like the printer driver defaults to > letter, whereas the printer tray is A4? > > I have that problem with OKI printers, and have to press recover to > get it to print if I forget to change the paper source to A4 from > letter. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mark Howard Sent: > Wednesday, 21 January 2004 12:50 p.m. To: [EMAIL PROTECTED] > Subject: [DUG] Printing to HP2300 > > Hi All > > I have a site where my app has been running fine for a couple of > years. > > They have just installed a new printer HP2300 and now my app will not > print correctly to this printer. > > The HP2300 is set as the default printer for the workstation but to > get the report to print from my app they have to go to the printer and > press the page feed button. > > They have downloaded the latest drivers, with no improvement. > > Anybody have any ideas? > > Mark > _______________________________________________ > Delphi mailing list > [EMAIL PROTECTED] > http://ns3.123.co.nz/mailman/listinfo/delphi > > _______________________________________________ > Delphi mailing list > [EMAIL PROTECTED] > http://ns3.123.co.nz/mailman/listinfo/delphi > _______________________________________________ Delphi mailing list [EMAIL PROTECTED] http://ns3.123.co.nz/mailman/listinfo/delphi
