On 2/20/06, John Embretsen <[EMAIL PROTECTED]> wrote: > > I think it would be good to do a long running test with patch4+patch5 > > before committing them. I'll be running the repro derbyStress.java with 1M > > prepared statements and will check client and server memory usage. Other > > than that, it may be good to run the patch through DOTS test. I do not have > > the DOTS setup. I would appreciate if John or anyone else has the setup for > > DOTS and will be willing to run the tests after I upload the new patches. > > Anyone has suggestions for other tests I can run to test this? > > I can run a DOTS test with patches 4 and 5 applied to the trunk, > although it might take a few days until you see the results (since, well, the > test is long-running, and I have limited machine resources at my disposal). > I'll wait until the patches are ready, of course... > > Setting up a DOTS test is not a huge ordeal, though. I think you will be able > to set it up as long as you have access to a linux machine and read the > related documents at http://db.apache.org/derby/integrate/index.html. > > My particular set-up did not stray too far from the DOTS defaults (I can post > the config file if you need it) - I think that as long as you use a similar > heap size (I used 128 MB fixed heap, 64 MB fixed PermSpace) , you will get > roughly the same results.
Thanks John. I'll also try to see if I can get a machine to setup DOTS after I finish my current iteration of the patch. Thanks, Deepa
