Public bug reported:
Binary package hint: gnome-terminal
r...@work:/home/ddm# hdparm -X udma5 /dev/sda1
/dev/sda1: setting xfermode to 69 (UltraDMA mode5)
HDIO_DRIVE_CMD(setxfermode) failed: Input/output error
r...@work:/home/ddm# su r...@work:/home/ddm# sdparm -X udma5 /dev/sda1 The
program 'sdparm' is currently not installed. You can install it by typing:
apt-get install sdparm
bash: sdparm: command not found r...@work:/home/ddm# hdparm -i /dev/sda1
/dev/sda1: Model=ST9120817AS , FwRev=3.AAA ,
SerialNo= 5RE0YA34 Config={ HardSect NotMFM HdSw>15uSec Fixed
DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0,
ECCbytes=4 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA
modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown
setting WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-4,5,6,7 *
signifies the current active mode
r...@work:/home/ddm# hdparm -tT dev/sda1 dev/sda1: No such file or directory
r...@work:/home/ddm# hdparm -t dev/sda1 dev/sda1: No such file or directory
r...@work:/home/ddm# dev bash: dev: command not found
r...@work:/home/ddm# sda1 bash: sda1: command not found
r...@work:/home/ddm# hdparm -tT /dev/sda1 /dev/sda1: Timing cached reads:
1212 MB in 2.00 seconds = 605.53 MB/sec Timing buffered disk reads: 184 MB
in 3.00 seconds = 61.30 MB/sec
r...@work:/home/ddm# hdparm -X udma5 /dev/sda1 /dev/sda1: setting
xfermode to 69 (UltraDMA mode5) HDIO_DRIVE_CMD(setxfermode) failed:
Input/output error
r...@work:/home/ddm# r...@work:/home/ddm# hdparm -i /dev/ /dev/: Is a
directory r...@work:/home/ddm# hdparm -i /dev/sda1 /dev/sda1:
Model=ST9120817AS , FwRev=3.AAA ,
SerialNo= 5RE0YA34 Config={ HardSect NotMFM HdSw>15uSec
Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0,
SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=8192kB,
MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064,
LBA=yes, LBAsects=234441648 IORDY=on/off, tPIO={min:120,w/IORDY:120},
tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4
udma5 *udma6
(BUT ITS NOT!)
AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to:
unknown: ATA/ATAPI-4,5,6,7
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/gnome-terminal
Package: gnome-terminal 2.26.0-0ubuntu2
ProcEnviron:
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: gnome-terminal
Tags: ubuntu-unr
Uname: Linux 2.6.28-13-generic i686
** Affects: gnome-terminal (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug i386 ubuntu-unr
--
I get "Input/Output Error" when trying to enable udma5 on hdd. The hdd itself
(aspire one's 120GB SATA 5400rpm) supports udma5 (perhaps 6 too) and was
running in udma5 under Windows XP without any trouble.
https://bugs.launchpad.net/bugs/399432
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in ubuntu.
--
desktop-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
