I just had the same error on one of my production V440 servers, that is running Solaris9: " 19:21 /var/adm/messages [Inst=Messages]: ALARM match found. Matching contents: [Apr 5 20:03:32 secnwsrtns2 rmclomv: [ID 969981 kern.error] FAULT_SENSOR @ PS1.FF_POK has faulted. May be caused by MB POK circuitry malfunction.]. Pattern: [string =~ ERROR].
19:20 Direct Connect - secnwsrtns2 Hardware ERROR Found from prtdiag " Prtdiag shows a failure, under Voltage Sensors: "PS1 FF_POK - - - - - failed" As follows: Voltage sensors: Location Sensor Voltage Lo LoWarn HiWarn Hi Status ---------------------------------------------------------------------------- MB V_+1V5 1.49V 1.20V 1.27V 1.73V 1.80V okay MB V_VCCTM 2.52V 2.00V 2.12V 2.88V 3.00V okay MB V_NET0_1V2D 1.22V 0.96V 1.02V 1.38V 1.44V okay MB V_NET1_1V2D 1.23V 0.96V 1.02V 1.38V 1.44V okay MB V_NET0_1V2A 1.23V 0.96V 1.02V 1.38V 1.44V okay MB V_NET1_1V2A 1.24V 0.96V 1.02V 1.38V 1.44V okay MB V_+3V3 3.40V 2.64V 2.81V 3.80V 3.96V okay MB V_+3V3STBY 3.33V 2.64V 2.81V 3.80V 3.96V okay MB/BAT V_BAT 3.05V - 2.25V - - okay MB V_SCSI_CORE 1.77V 1.44V 1.53V 2.07V 2.16V okay MB V_+5V 5.07V 4.00V 4.25V 5.75V 6.00V okay MB V_+12V 12.00V 9.60V 10.20V 13.80V 14.40V okay MB V_-12V -11.90V -14.40V -13.80V -10.20V -9.60V okay PS0 P_PWR - - - - - okay PS0 FF_POK - - - - - okay PS1 P_PWR - - - - - okay PS1 FF_POK - - - - - failed ---------------------------------------------------------------------------- Sun says that the Voltage Sensor failure error is stemming from a failing FAN on power supply PS1. So, I have a Sun service engineer coming to replace power supply PS1. This message posted from opensolaris.org