You might have been able to do this without rebooting by using 'cfgadm'
On Tue, May 5, 2009 at 2:54 AM, Dan Bikle <dan.bikle at gmail.com> wrote:
> Okay I figured this out:
>
> ?touch /reconfigure
> ?shutdown -y -g0 -i6
> ?format
>
> I then saw:
> bash sol root ~ 3 # format
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
> ? ? ? 0. c0d0 <DEFAULT cyl 24174 alt 2 hd 255 sec 63>
> ? ? ? ? ?/pci at 0,0/pci-ide at 12/ide at 0/cmdk at 0,0
> ? ? ? 1. c3d0 <DEFAULT cyl 60798 alt 2 hd 255 sec 63>
> ? ? ? ? ?/pci at 0,0/pci-ide at 12/ide at 1/cmdk at 0,0
> Specify disk (enter its number): 1
>
> selecting c3d0
> Controller working list found
> [disk formatted, defect list found]
>
>
> FORMAT MENU:
> ? ? ? ?disk ? ? ? - select a disk
> ? ? ? ?type ? ? ? - select (define) a disk type
> ? ? ? ?partition ?- select (define) a partition table
> ? ? ? ?current ? ?- describe the current disk
> ? ? ? ?format ? ? - format and analyze the disk
> ? ? ? ?fdisk ? ? ?- run the fdisk program
> ? ? ? ?repair ? ? - repair a defective sector
> ? ? ? ?show ? ? ? - translate a disk address
> ? ? ? ?label ? ? ?- write label to the disk
> ? ? ? ?analyze ? ?- surface analysis
> ? ? ? ?defect ? ? - defect list management
> ? ? ? ?backup ? ? - search for backup labels
> ? ? ? ?verify ? ? - read and display labels
> ? ? ? ?save ? ? ? - save new disk/partition definitions
> ? ? ? ?volname ? ?- set 8-character volume name
> ? ? ? ?!<cmd> ? ? - execute <cmd>, then return
> ? ? ? ?quit
> format>
>
> I did:
>
> format> type
>
>
> AVAILABLE DRIVE TYPES:
> ? ? ? ?0. DEFAULT
> ? ? ? ?1. DEFAULT
> ? ? ? ?2. other
> Specify disk type (enter its number)[1]:
>
> selecting c3d0
> Controller working list found
> [disk formatted, defect list found]
> format> part
> part
> Please run fdisk first.
> format> fdisk
>
> No fdisk table exists. The default partition for the disk is:
>
> ?a 100% "SOLARIS System" partition
>
> Type "y" to accept the default partition, ?otherwise type "n" to edit the
> ?partition table.
> y
> format> part
>
>
> PARTITION MENU:
> ? ? ? ?0 ? ? ?- change `0' partition
> ? ? ? ?1 ? ? ?- change `1' partition
> ? ? ? ?2 ? ? ?- change `2' partition
> ? ? ? ?3 ? ? ?- change `3' partition
> ? ? ? ?4 ? ? ?- change `4' partition
> ? ? ? ?5 ? ? ?- change `5' partition
> ? ? ? ?6 ? ? ?- change `6' partition
> ? ? ? ?7 ? ? ?- change `7' partition
> ? ? ? ?select - select a predefined table
> ? ? ? ?modify - modify a predefined partition table
> ? ? ? ?name ? - name the current table
> ? ? ? ?print ?- display the current table
> ? ? ? ?label ?- write partition map and label to the disk
> ? ? ? ?!<cmd> - execute <cmd>, then return
> ? ? ? ?quit
> partition>
>
> partition> prin
>
> Current partition table (original):
> Total disk cylinders available: 60797 + 2 (reserved cylinders)
>
> Part ? ? ?Tag ? ?Flag ? ? Cylinders ? ? ? ? Size ? ? ? ? ? ?Blocks
> ?0 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?1 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?2 ? ? backup ? ?wu ? ? ? 0 - 60797 ? ? ?465.74GB ? ?(60798/0/0) 976719870
> ?3 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?4 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?5 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?6 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?7 unassigned ? ?wm ? ? ? 0 ? ? ? ? ? ? ? ?0 ? ? ? ? (0/0/0) ? ? ? ? ? ? 0
> ?8 ? ? ? boot ? ?wu ? ? ? 0 - ? ? 0 ? ? ? ?7.84MB ? ?(1/0/0) ? ? ? ? 16065
> ?9 alternates ? ?wm ? ? ? 1 - ? ? 2 ? ? ? 15.69MB ? ?(2/0/0) ? ? ? ? 32130
>
> partition>
>
> partition> q
>
>
> FORMAT MENU:
> ? ? ? ?disk ? ? ? - select a disk
> ? ? ? ?type ? ? ? - select (define) a disk type
> ? ? ? ?partition ?- select (define) a partition table
> ? ? ? ?current ? ?- describe the current disk
> ? ? ? ?format ? ? - format and analyze the disk
> ? ? ? ?fdisk ? ? ?- run the fdisk program
> ? ? ? ?repair ? ? - repair a defective sector
> ? ? ? ?show ? ? ? - translate a disk address
> ? ? ? ?label ? ? ?- write label to the disk
> ? ? ? ?analyze ? ?- surface analysis
> ? ? ? ?defect ? ? - defect list management
> ? ? ? ?backup ? ? - search for backup labels
> ? ? ? ?verify ? ? - read and display labels
> ? ? ? ?save ? ? ? - save new disk/partition definitions
> ? ? ? ?volname ? ?- set 8-character volume name
> ? ? ? ?!<cmd> ? ? - execute <cmd>, then return
> ? ? ? ?quit
> format> label
>
> Ready to label disk, continue? y
>
> format> q
>
> bash sol root ~ 7 # newfs c3d0s2
>
> newfs: construct a new file system /dev/rdsk/c3d0s2: (y/n)? y
>
> Warning: 1732 sector(s) in last cylinder unallocated
> /dev/rdsk/c3d0s2: ? ? ? 976703804 sectors in 158969 cylinders of 48 tracks,
> 128 sectors
> ? ? ? ?476906.2MB in 9936 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
> super-block backups (for fsck -F ufs -o b=#) at:
> ?32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
> Initializing cylinder groups:
> ...............................................................................
> ...............................................................................
> ........................................
> super-block backups for last 10 cylinder groups at:
> ?975766304, 975864736, 975963168, 976061600, 976160032, 976258464, 976356896,
> ?976455328, 976553760, 976652192
> bash sol root ~ 8 #
>
> bash sol root ~ 8 # ll /u2
> /u2: No such file or directory
> bash sol root ~ 9 # mkdir /u2
> bash sol root ~ 10 # grep c3d0 /etc/vfstab
> /dev/dsk/c3d0s2 /dev/rdsk/c3d0s2 ? ? ? ?/u2 ? ? ufs ? ? 2 ? ? ? yes ? ? -
> bash sol root ~ 11 #
>
> bash sol root ~ 11 # mount /u2
> bash sol root ~ 12 #
>
> bash sol root ~ 12 # df -h /u2
> Filesystem ? ? ? ? ? ? size ? used ?avail capacity ?Mounted on
> /dev/dsk/c3d0s2 ? ? ? ?459G ? ?64M ? 454G ? ? 1% ? ?/u2
> bash sol root ~ 13 #
> bash sol root ~ 13 #
> bash sol root ~ 13 #
> bash sol root ~ 13 #
> --
> This message posted from opensolaris.org
> _______________________________________________
> desktop-discuss mailing list
> desktop-discuss at opensolaris.org
>
