Normally happens when grub cannot find the stage2... What is your harddisk layout? Is the Solaris partition the only partition on your disk?
-Li On Tue, 2007-07-31 at 02:20 -0700, Sandro wrote: > Hi > > I'm trying to install the new 69 build to my desktop pc. > After the installation the systems reboots as usual but then instead of the > nice grub I get grub in the interactive mode and I can't select any OS to > boot. > > I also tried build 64 and 57 but no changes there.. > > Here's my hardware config > motherboard - MSI P965 Neo-F > cpu - Intel Pentium D 805, dual core, 2.66GHz > memory - OCZ Platinum-Series 2x512MB kit > gfx card - MSI Radeon RX1600XT > > I even had to by a new WD 80gb IDE hard drive, because my sata disk caused > the installation to fail. I guess there's no driver for this sata controller > yet.. > > Could anybody help me with this, please? I have absolutely no idea what's > going wrong here... > > I also tried to install the grub manually using installgrub like this > "installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c0d1s0" > still no changes.. > > > This message posted from opensolaris.org > _______________________________________________ > desktop-discuss mailing list > desktop-discuss at opensolaris.org
