Kindly let me know when this will be available as an update. Also I have now seeing that the connection is getting dropped after being online for 50 min to an hour and the modem disappears from the network manager. I can get the connection back by pulling out and then plugging it back in. But again it will go after 50 min.
Pasting the last few entries from dmesg below. ================================================================================== [ 165.595394] usb 3-1: new full-speed USB device number 6 using xhci_hcd [ 165.617213] option 3-1:1.0: GSM modem (1-port) converter detected [ 165.617497] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 165.617766] option 3-1:1.1: GSM modem (1-port) converter detected [ 165.618024] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 165.618262] option 3-1:1.2: GSM modem (1-port) converter detected [ 165.618519] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 165.618791] option 3-1:1.3: GSM modem (1-port) converter detected [ 165.618979] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 165.619205] option 3-1:1.4: GSM modem (1-port) converter detected [ 165.619472] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB4 [ 165.619949] scsi11 : usb-storage 3-1:1.5 [ 166.620381] scsi 11:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 166.622644] sd 11:0:0:0: Attached scsi generic sg3 type 0 [ 166.629783] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 190.755001] PPP BSD Compression module registered [ 190.772865] PPP Deflate Compression module registered [ 1637.535007] kbd_keycode: 27 callbacks suppressed [ 1637.535016] keyboard: can't emulate rawmode for keycode 240 [ 1637.535035] keyboard: can't emulate rawmode for keycode 240 [ 1637.535042] asus_wmi: Unknown key 57 pressed [ 1886.505555] keyboard: can't emulate rawmode for keycode 240 [ 1886.505579] keyboard: can't emulate rawmode for keycode 240 [ 1886.505587] asus_wmi: Unknown key 58 pressed [ 3492.027894] usb 3-1: USB disconnect, device number 6 [ 3492.028343] option: option_instat_callback: error -108 [ 3492.029278] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 3492.029323] option 3-1:1.0: device disconnected [ 3492.029852] xhci_hcd 0000:04:00.0: WARN Cannot submit Set TR Deq Ptr [ 3492.029860] xhci_hcd 0000:04:00.0: A Set TR Deq Ptr command is pending. [ 3492.030175] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 3492.030222] option 3-1:1.1: device disconnected [ 3492.030554] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 3492.030585] option 3-1:1.2: device disconnected [ 3492.031374] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 3492.031403] option 3-1:1.3: device disconnected [ 3492.031958] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [ 3492.032004] option 3-1:1.4: device disconnected [ 3495.250140] usb 3-1: new full-speed USB device number 7 using xhci_hcd [ 3495.268949] scsi12 : usb-storage 3-1:1.0 [ 3496.268035] scsi 12:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 3496.276465] sr1: scsi3-mmc drive: 0x/0x caddy [ 3496.276861] sr 12:0:0:0: Attached scsi CD-ROM sr1 [ 3496.277983] sr 12:0:0:0: Attached scsi generic sg3 type 5 [ 3496.356856] scsi 12:0:0:0: rejecting I/O to offline device [ 3496.356862] scsi 12:0:0:0: killing request [ 3519.389608] usb 3-1: USB disconnect, device number 7 [ 3522.995741] usb 3-1: new full-speed USB device number 8 using xhci_hcd [ 3523.015698] scsi13 : usb-storage 3-1:1.0 [ 3524.017589] scsi 13:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 3524.026039] sr1: scsi3-mmc drive: 0x/0x caddy [ 3524.026619] sr 13:0:0:0: Attached scsi CD-ROM sr1 [ 3524.026943] sr 13:0:0:0: Attached scsi generic sg3 type 5 [ 3524.118847] scsi 13:0:0:0: rejecting I/O to offline device [ 3524.118858] scsi 13:0:0:0: killing request [ 3549.140001] usb 3-1: USB disconnect, device number 8 [ 3552.874875] usb 3-1: new full-speed USB device number 9 using xhci_hcd [ 3552.894813] scsi14 : usb-storage 3-1:1.0 [ 3553.896733] scsi 14:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 3553.904277] sr1: scsi3-mmc drive: 0x/23x caddy [ 3553.904766] sr 14:0:0:0: Attached scsi CD-ROM sr1 [ 3553.905067] sr 14:0:0:0: Attached scsi generic sg3 type 5 [ 3553.995891] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 3553.995918] sr: Sense Key : Hardware Error [current] [ 3553.995926] sr: Add. Sense: No additional sense information [ 3554.133562] usb 3-1: USB disconnect, device number 9 [ 3555.428126] usb 3-1: new full-speed USB device number 10 using xhci_hcd [ 3555.449815] option 3-1:1.0: GSM modem (1-port) converter detected [ 3555.450130] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 3555.450396] option 3-1:1.1: GSM modem (1-port) converter detected [ 3555.450669] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 3555.450922] option 3-1:1.2: GSM modem (1-port) converter detected [ 3555.451198] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 3555.451484] option 3-1:1.3: GSM modem (1-port) converter detected [ 3555.451694] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 3555.451922] option 3-1:1.4: GSM modem (1-port) converter detected [ 3555.452166] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB4 [ 3555.452632] scsi15 : usb-storage 3-1:1.5 [ 3556.453666] scsi 15:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 3556.455899] sd 15:0:0:0: Attached scsi generic sg3 type 0 [ 3556.461756] sd 15:0:0:0: [sdc] Attached SCSI removable disk ================================================================================== -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to usb-modeswitch in Ubuntu. https://bugs.launchpad.net/bugs/990337 Title: BSNL USB Capitel EVDO not working after upgrade to 12.04 Status in “usb-modeswitch” package in Ubuntu: Fix Released Bug description: lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 ----------------------------- I have a BSNL EVDO modem which was working fine on ubuntu 10.10, 11.04 and 11.10. Yesterday after upgrading to 12.04 via update manager, it is not working and not even detected on the network manager. I downloaded ISO (64 bit) and tried a fresh install after formatting the partition, with no effect. Please help. PS :: tested and ensured it is still working fine on windows Here is the output on /var/log/usb_modeswitch.log ============================================================================= USB_ModeSwitch log from Sat Apr 28 12:13:18 2012 Using global config file: /etc/usb_modeswitch.conf Raw args from udev: /2-1.2:1.0 Bus ID for device not given by udev. Trying to determine it from kernel name (2-1.2:1.0) ... Using top device dir /sys/bus/usb/devices/2-1.2 USB dir exists: /sys/bus/usb/devices/2-1.2 SCSI dir exists: /sys/bus/usb/devices/2-1.2 Warning: SCSI attribute "vendor" not readable. Warning: SCSI attribute "model" not readable. Warning: SCSI attribute "rev" not readable. ---------------- USB values from sysfs: idVendor 1c9e idProduct 9e00 manufacturer Qualcomm, Incorporated product USB MMC Storage serial 000000000002 bNumConfigurations 1 ---------------- bNumConfigurations is 1 - don't check for active configuration Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz Searching entries named: /usr/share/usb_modeswitch/1c9e:9e00* Searching overriding entries named: /etc/usb_modeswitch.d/1c9e:9e00* SCSI attributes not needed, moving on. Extracting config 1c9e:9e00 from collection /usr/share/usb_modeswitch/configPack.tar.gz config: TargetClass set to ff Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1 ! matched, now switching Command to be run: /usr/sbin/usb_modeswitch -I -W -D -s 20 -c /run/usb_modeswitch/current_cfg -u -1 -v 1c9e -p 9e00 2>&1 Verbose debug output of usb_modeswitch and libusb follows (Note that some USB errors are expected in the process) -------------------------------- tail: /var/log/usb_modeswitch.log: file truncated USB_ModeSwitch log from Sat Apr 28 12:13:20 2012 Using global config file: /etc/usb_modeswitch.conf Raw args from udev: /2-1.2:1.5 Bus ID for device not given by udev. Trying to determine it from kernel name (2-1.2:1.5) ... Using top device dir /sys/bus/usb/devices/2-1.2 USB dir exists: /sys/bus/usb/devices/2-1.2 Warning: USB attribute "serial" not readable. SCSI dir exists: /sys/bus/usb/devices/2-1.2 Warning: SCSI attribute "vendor" not readable. Warning: SCSI attribute "model" not readable. Warning: SCSI attribute "rev" not readable. ---------------- USB values from sysfs: idVendor 1c9e idProduct 9e00 manufacturer Qualcomm, Incorporated product Qualcomm CDMA Technologies MSM serial (null) bNumConfigurations 1 ---------------- bNumConfigurations is 1 - don't check for active configuration Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz Searching entries named: /usr/share/usb_modeswitch/1c9e:9e00* Searching overriding entries named: /etc/usb_modeswitch.d/1c9e:9e00* SCSI attributes not needed, moving on. Reading config file: /run/usb_modeswitch/current_cfg * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x1c9e DefaultProduct= 0x9e00 TargetVendor= not set TargetProduct= not set TargetClass= 0xff TargetProductList="" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000606f50402527000000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice disabled Success check enabled, max. wait time 20 seconds System integration mode enabled Looking for target devices ... No devices in target mode or class found Looking for default devices ... searching devices, found USB ID 1d6b:0003 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 1c9e:9e00 found matching vendor ID found matching product ID target class ff not matching adding device searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 0bda:0139 searching devices, found USB ID 058f:a014 searching devices, found USB ID 0cf3:3005 searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 Found device in default mode, class or configuration (1) Accessing device 007 on bus 002 ... Skipping the check for the current configuration Using first interface: 0x00 Using endpoints 0x08 (out) and 0x87 (in) USB description data (for identification) ------------------------- Manufacturer: Qualcomm, Incorporated Product: USB MMC Storage Serial No.: 000000000002 ------------------------- Looking for active driver ... OK, driver found ("usb-storage") OK, driver "usb-storage" detached Setting up communication with interface 0 Using endpoint 0x08 for message sending ... Trying to send message 1 to endpoint 0x08 ... OK, message successfully sent Resetting response endpoint 0x87 Resetting message endpoint 0x08 Device is gone, skipping any further commands Checking for mode switch (max. 20 times, once per second) ... Searching for target devices ... searching devices, found USB ID 1d6b:0003 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 0bda:0139 searching devices, found USB ID 058f:a014 searching devices, found USB ID 0cf3:3005 searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 Searching for target devices ... searching devices, found USB ID 1d6b:0003 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 1c9e:9e00 found matching vendor ID found matching product ID target class ff matching adding device searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 0bda:0139 searching devices, found USB ID 058f:a014 searching devices, found USB ID 0cf3:3005 searching devices, found USB ID 8087:0024 searching devices, found USB ID 1d6b:0002 Found target device, now opening Found target device 008 on bus 002 Target device description data ------------------------- Manufacturer: Qualcomm, Incorporated Product: Qualcomm CDMA Technologies MSM Serial No.: not provided ------------------------- Found correct target device Mode switch succeeded. Bye. ok:1c9e:9e00 -------------------------------- (end of usb_modeswitch output) Checking success of mode switch for max. 20 seconds ... Reading attributes ... USB dir exists: /sys/bus/usb/devices/2-1.2 Warning: USB attribute "serial" not readable. All attributes matched Mode switching was successful, found 1c9e:9e00 (Qualcomm, Incorporated: Qualcomm CDMA Technologies MSM)Now checking for bound driver ... no driver has bound to interface 0 yet Device not in "bind_list" yet, bind it now modprobe not foundModule loader is (null) Can't do anymore without module loader; get "modtools"! driver binding failed Checking for AVOID_RESET_QUIRK kernel attribute AVOID_RESET_QUIRK activated All done, exiting ============================================================================= dmesg output ~~~~~~~~~~~ [ 43.068088] usb 2-1.2: new full-speed USB device number 3 using ehci_hcd [ 43.189986] Initializing USB Mass Storage driver... [ 43.190211] scsi7 : usb-storage 2-1.2:1.0 [ 43.190275] usbcore: registered new interface driver usb-storage [ 43.190276] USB Mass Storage support registered. [ 43.266543] usbcore: registered new interface driver uas [ 44.188822] scsi 7:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 44.195201] sr1: scsi3-mmc drive: 0x/0x caddy [ 44.195414] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 44.195487] sr 7:0:0:0: Attached scsi generic sg3 type 5 [ 44.292778] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 44.292786] sr: Sense Key : Hardware Error [current] [ 44.292789] sr: Add. Sense: No additional sense information [ 44.448614] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 44.448622] sr: Sense Key : Hardware Error [current] [ 44.448624] sr: Add. Sense: No additional sense information [ 44.680705] usb 2-1.2: USB disconnect, device number 3 [ 45.903611] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd [ 45.998999] scsi8 : usb-storage 2-1.2:1.5 [ 46.996804] scsi 8:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 46.997717] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 47.003776] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 131.624851] usb 2-1.2: USB disconnect, device number 4 [ 137.005910] usb 2-1.2: new full-speed USB device number 5 using ehci_hcd [ 137.101084] scsi9 : usb-storage 2-1.2:1.0 [ 138.098644] scsi 9:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 138.106114] sr1: scsi3-mmc drive: 0x/0x caddy [ 138.106531] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 138.106811] sr 9:0:0:0: Attached scsi generic sg3 type 5 [ 138.198600] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 138.198627] sr: Sense Key : Hardware Error [current] [ 138.198635] sr: Add. Sense: No additional sense information [ 138.456257] usb 2-1.2: USB disconnect, device number 5 [ 139.677709] usb 2-1.2: new full-speed USB device number 6 using ehci_hcd [ 139.774058] scsi10 : usb-storage 2-1.2:1.5 [ 140.774624] scsi 10:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 140.777200] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 140.783764] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 156.867977] usb 2-1.2: USB disconnect, device number 6 [ 216.594721] usb 2-1.1: new full-speed USB device number 7 using ehci_hcd [ 216.689732] scsi11 : usb-storage 2-1.1:1.0 [ 217.687395] scsi 11:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 217.694689] sr1: scsi3-mmc drive: 0x/0x caddy [ 217.695092] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 217.695397] sr 11:0:0:0: Attached scsi generic sg3 type 5 [ 217.787287] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 217.787312] sr: Sense Key : Hardware Error [current] [ 217.787321] sr: Add. Sense: No additional sense information [ 218.117857] usb 2-1.1: USB disconnect, device number 7 [ 219.338270] usb 2-1.1: new full-speed USB device number 8 using ehci_hcd [ 219.433452] scsi12 : usb-storage 2-1.1:1.5 [ 220.430998] scsi 12:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2 [ 220.432676] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 220.438016] sd 12:0:0:0: [sdc] Attached SCSI removable disk To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/usb-modeswitch/+bug/990337/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
