The new lexmark driver for Ubuntu 12.04 has been published in september 2012 . Can you please test your SX05 ( 305, 405 etc...) with the 1.02 driver from lexmark ?
Here is the direct link for 64 bits http://support.lexmark.com:80/lexmark/index?page=content&locale=FR&docLocale=en_US&segType=recommendedSegmentLINUX_UNIX&userlocale=FR_FR&id=DR21639 it only concerns seome printers : Lexmark Interpret S409, Lexmark Prospect Pro209, Lexmark Impact S302, Lexmark Interact S608, Lexmark Prevail Pro702, Lexmark Interpret S405, Lexmark Prospect Pro205, Lexmark Intuition S505, Lexmark Impact S305, Lexmark Interact S602, Lexmark Intuition S508, Lexmark Intuition S502, Lexmark Impact S308, Lexmark Interpret S408, Lexmark Interpret S402, Lexmark Platinum Pro902, Lexmark Prestige Pro802, Lexmark Prevail Pro706, Lexmark Prospect Pro208, Lexmark Prospect Pro202, Lexmark Platinum Pro905, Lexmark Interact S605, Lexmark Prestige Pro805, Lexmark Prevail Pro705, Lexmark Pinnacle Pro901, Lexmark Platinum Pro908, Lexmark Prestige Pro808, Lexmark Interact S606, Lexmark Prevail Pro708, Lexmark Genesis S815, Lexmark Genesis S816, Lexmark Prevail Pro709, Lexmark Impact S301 If this works for a S405 , we will close this bug and open a new one for 08Z series It does not concerns 2 printers (08Z) I still have problems on USB with : - X4650 - X2650 ** Summary changed: - Unable to print to Lexmark S405 since upgrade to 11.10 + Unable to print with Lexmark S400 series since upgrade to 11.10 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/902535 Title: Unable to print with Lexmark S400 series since upgrade to 11.10 Status in “cups” package in Ubuntu: Confirmed Status in “cups” source package in Precise: Incomplete Bug description: Following the upgrade from 11.04 to 11.10 my Lexmark S405 now is unable to print. After removing all previous drivers (i.e. from a clean install of the printer), I have two options to proceed: If I connect the printer via USB and wait for "auto-detection", the system is able to determine that a Lexmark S405 has been added (and adds the printer as a "S300-S400-Series". However at the same time I get the following error message: "Not supported by this backend. The action is not supported by this backend. Please report a bug as this should not have happened. Provided postscript-driver not supported" The printer is added and does show up in CUPS. The device URI is given as: "://Lexmark/S300-S400%20Series?serial=90T409817388744&interface=1". Previously two packages were also added via the Software Centre ( "lexmark-legacy-wsu (1.0-1)" and "lexmark-inkjet-legacy-wjre (1.0-1)" but my most recent attempt to rectify this fault was following updates to fix bug 897309. On this occasion (following the updated ghostscript) no software was added via the Software Centre. I also have the drivers from Lexmark (the second install option). These drivers will install (but if they detect either of the above mentioned packages then installation will fail) but, once you are prompted to connect the printer via USB the error message highlighted above also appears. The results from this approach is that two printers are installed...but neither of them work. Either method of installing the printer results in the same scenario - the printer is listed as "installed", but items in the print queue remain there without no response from the printer. A Test Page shows the printer as "Processing page 1" before eventually throwing an error. Incidentally it is possible to scan from the printer (it's an all-in- one printer) into Ubuntu, but it seems to be impossible to print out from Ubuntu. Also previous work suggested that this may be connected to bug 883585. Also, despite CUPS referring to itself as 1.5, the intro screen says "what's new in CUPS 1.4". The printer does show up in CUPS, but it seems to be impossible to carry out any maintenance on the printer within CUPS (but this may be my "newbie-ness" showing though). My first bug report so hope I've included everything! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/902535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
