Best guess: Booting with 'noapic', I see the "irq 5: nobody cared" message on resume, along with 10000 IRQ5 counts in /proc/interrupts (the devices claiming that IRQ are quiescent).
Without 'noapic' that must be triggering something else to go haywire, perhaps the AER logic (though that is all MSI, so probably not). I'm flying blind on those boots. I bet that, if I can recall how to re-enable IRQ5, I'll see it continuously asserting. Chipset or BIOS bug maybe. I don't know if I had AER enabled under Lucid, so that might be the difference. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu. https://bugs.launchpad.net/bugs/1094412 Title: Precise does not resume from S3 - kernel panic on resume Status in “nvidia-graphics-drivers” package in Ubuntu: New Bug description: 4 days ago I had Ubuntu Lucid running on this computer. Suspend and resume worked flawlessly every time. Then I upgraded to Ubuntu Precise. Suspend seems to work, but resume fails every time. By the flashing keyboard lights, I guess it kernel paniced. It fails from the Live CD and from a fresh install. Here is my debug so far. Run Update Manager Install all updates Reboot Try suspend = fails sudo apt-get install synaptic Run synaptic Install linux-generic-lts-quantal (3.5.0-21) Reboot Try suspend = fails Run jockey-gtk Install "experimental" 304 nVidia driver Reboot NVRM error in dmesg Add video=vesa:off vga=normal to /etc/default/grub Run update-grub2 Reboot No more NVRM error (also no splash screen) Try suspend = fails echo core > /sys/power/pm_test echo mem > /sys/power/state system acts like it is going to sleep, and then wakes up a few seconds later dmesg shows: [ 1230.083404] ------------[ cut here ]------------ [ 1230.083410] WARNING: at /build/buildd/linux-lts-quantal-3.5.0/kernel/power/suspend_test.c:53 suspend_test_finish+0x86/0x90() [ 1230.083411] Hardware name: To Be Filled By O.E.M. [ 1230.083412] Component: resume devices, time: 14424 [ 1230.083412] Modules linked in: snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul bnep rfcomm parport_pc ppdev nvidia(PO) snd_emu10k1 snd_ac97_codec ac97_bus snd_pcm snd_page_alloc snd_util_mem snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer coretemp snd_seq_device kvm_intel kvm snd ghash_clmulni_intel soundcore aesni_intel btusb cryptd aes_x86_64 bluetooth i7core_edac edac_core microcode mac_hid lpc_ich mxm_wmi shpchp serio_raw wmi hid_generic lp parport usbhid hid r8169 pata_marvell [ 1230.083445] Pid: 3329, comm: bash Tainted: P O 3.5.0-21-generic #32~precise1-Ubuntu [ 1230.083446] Call Trace: [ 1230.083448] [<ffffffff81052c9f>] warn_slowpath_common+0x7f/0xc0 [ 1230.083452] [<ffffffff81052d96>] warn_slowpath_fmt+0x46/0x50 [ 1230.083455] [<ffffffff8109b836>] suspend_test_finish+0x86/0x90 [ 1230.083457] [<ffffffff8109b53b>] suspend_devices_and_enter+0x10b/0x200 [ 1230.083460] [<ffffffff8109b701>] enter_state+0xd1/0x100 [ 1230.083463] [<ffffffff8109b74b>] pm_suspend+0x1b/0x60 [ 1230.083465] [<ffffffff8109a7a5>] state_store+0x45/0x70 [ 1230.083467] [<ffffffff81331d2f>] kobj_attr_store+0xf/0x30 [ 1230.083471] [<ffffffff811f77ff>] sysfs_write_file+0xef/0x170 [ 1230.083476] [<ffffffff811879d3>] vfs_write+0xb3/0x180 [ 1230.083480] [<ffffffff81187cfa>] sys_write+0x4a/0x90 [ 1230.083483] [<ffffffff816a6e69>] system_call_fastpath+0x16/0x1b [ 1230.083488] ---[ end trace 839cdd0078b3ce03 ]--- Boot with init=/bin/bash unload all modules except USBHID echo core > /sys/power/pm_test echo mem > /sys/power/state system acts like it is going to sleep, and then wakes up a few seconds later echo none > /sys/power/pm_test echo mem > /sys/power/state system goes to sleep press power to resume = fails At this point I am stumped on how to debug. This is a "modern" computer with no serial ports. It worked under Lucid, so I know it is POSSIBLE. Mobo: ASRock X58 single-socket CPU: Westmere 6 core (12 hyperthreads) 3.2 GHz RAM: 12 GB ECC Disk: sda = Intel SSD, mounted on / Disk: sdb = Intel SSD, not mounted Disk: sdc = Seagate HDD, not mounted Disk: sdd = Seagate HDD, not mounted NIC = Onboard RTL8168e/8111e Sound = EMU1212 (emu10k1, not even configured yet) Video = nVidia GeForce 7600 GT KB = PS2 (also tried USB) Mouse = USB Suspend and resume is a must-have for me. I am at my wits end. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/1094412/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp

