also, apport failed to run two commands I noticed in the summary, so I ran them manually. Here they are:
bladernr@GarbageScow:~$ fuser -v /dev/snd/by-path/ /dev/snd/controlC29 /dev/snd/seq /dev/snd/timer bladernr@GarbageScow:~$ sudo fuser -v /dev/snd/by-path/ /dev/snd/controlC29 /dev/snd/seq /dev/snd/timer [sudo] password for bladernr: bladernr@GarbageScow:~$ and this one: bladernr@GarbageScow:~$ sudo sh -c dmesg|sudo comm -13 --nocheck-order /var/log/dmesg - [ 32.049151] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 33.571866] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 33.675658] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 33.675839] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.676208] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.681708] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 33.689236] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3 [ 33.826071] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 33.833577] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3 [ 33.983599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.983998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.011107] wlan0: authenticate with e0:91:f5:b7:20:1a [ 35.018613] wlan0: send auth to e0:91:f5:b7:20:1a (try 1/3) [ 35.218706] wlan0: send auth to e0:91:f5:b7:20:1a (try 2/3) [ 35.220493] wlan0: authenticated [ 35.222705] wlan0: associate with e0:91:f5:b7:20:1a (try 1/3) [ 35.226619] wlan0: RX AssocResp from e0:91:f5:b7:20:1a (capab=0x431 status=0 aid=2) [ 35.231718] wlan0: associated [ 35.231770] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.454824] ipmi message handler version 39.2 [ 36.470720] IPMI System Interface driver. [ 36.470753] ipmi_si: Adding default-specified kcs state machine [ 36.470755] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 36.470760] ipmi_si: Interface detection failed [ 36.474044] ipmi_si: Adding default-specified smic state machine [ 36.474055] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 36.474064] ipmi_si: Interface detection failed [ 36.478200] ipmi_si: Adding default-specified bt state machine [ 36.478206] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 36.478216] ipmi_si: Interface detection failed [ 36.478285] ipmi_si: Unable to find any System Interface(s) [ 99.735249] ip_tables: (C) 2000-2006 Netfilter Core Team [ 99.874012] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 101.283737] init: plymouth-stop pre-start process (2623) terminated with status 1 [ 272.825421] usb 1-1.1: new high-speed USB device number 5 using ehci-pci [ 273.028379] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=8007 [ 273.028385] usb 1-1.1: New USB device strings: Mfr=16, Product=16, SerialNumber=0 [ 273.028388] usb 1-1.1: Product: HP USB Webcam [ 273.028389] usb 1-1.1: Manufacturer: HP USB Webcam [ 273.169241] Linux video capture interface: v2.00 [ 273.183511] usbcore: registered new interface driver snd-usb-audio [ 273.423277] uvcvideo: Found UVC 1.00 device HP USB Webcam (03f0:8007) [ 273.432090] input: HP USB Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8 [ 273.432180] usbcore: registered new interface driver uvcvideo [ 273.432182] USB Video Class driver (1.1.1) [ 686.352565] usb 1-1.1: USB disconnect, device number 5 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1182086 Title: Raring update broke pulseaudio Status in “pulseaudio” package in Ubuntu: New Bug description: This morning, I started up my Thinkpad X201 running Precise and all was well. Then I ran update manager which said I had several packages to update. After that, Reboot and now I have no audio at all. In Audio settings, my intel sound device is gone, and I only have a Dummy Output device. for Input, I have nothing. This is very disappointing. I've seen reports of pulseaudio breaking when upgrading to Raring from an older Ubuntu release, but this was just an update to an existing Raring install. This is what apt says it installed this morning: Start-Date: 2013-05-20 09:09:37 Commandline: aptdaemon role='role-commit-packages' sender=':1.56' Install: linux-headers-3.8.0-21:amd64 (3.8.0-21.32), linux-image-3.8.0-21-generic:amd64 (3.8.0-21.32), linux-headers-3.8.0-21-generic:amd64 (3.8.0-21.32), linux-image-extra-3.8.0-21-generic:amd64 (3.8.0-21.32) Upgrade: thunderbird-locale-en-gb:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), thunderbird-locale-en-us:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), thunderbird:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), linux-generic:amd64 (3.8.0.19.35, 3.8.0.21.37), firefox-globalmenu:amd64 (20.0+build1-0ubuntu2, 21.0+build2-0ubuntu0.13.04.2), lib32asound2:amd64 (1.0.25-4ubuntu3, 1.0.25-4ubuntu3.1), firefox:amd64 (20.0+build1-0ubuntu2, 21.0+build2-0ubuntu0.13.04.2), linux-headers-generic:amd64 (3.8.0.19.35, 3.8.0.21.37), linux-image-generic:amd64 (3.8.0.19.35, 3.8.0.21.37), libasound2:amd64 (1.0.25-4ubuntu3, 1.0.25-4ubuntu3.1), firefox-locale-en:amd64 (20.0+build1-0ubuntu2, 21.0+build2-0ubuntu0.13.04.2), flashplugin-installer:amd64 (11.2.202.280ubuntu0.12.10.1, 11.2.202.285ubuntu0.13.04.1), thunderbird-globalmenu:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), thunderbird-gnome-support:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), linux-libc-dev:amd64 (3.8.0-19.30, 3.8.0-21.32), thunderbird-locale-en:amd64 (17.0.5+build1-0ubuntu1, 17.0.6+build1-0ubuntu0.13.04.1), firefox-gnome-support:amd64 (20.0+build1-0ubuntu2, 21.0+build2-0ubuntu0.13.04.2) End-Date: 2013-05-20 09:17:48 I will also attach the term.log from apt as well. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC29', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Mon May 20 10:07:48 2013 InstallationDate: Installed on 2011-10-14 (583 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MarkForUpload: True SourcePackage: pulseaudio UpgradeStatus: Upgraded to raring on 2013-04-28 (22 days ago) dmi.bios.date: 06/07/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET46WW (1.16 ) dmi.board.name: 3626R3U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET46WW(1.16):bd06/07/2010:svnLENOVO:pn3626R3U:pvrThinkPadX201:rvnLENOVO:rn3626R3U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626R3U dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1182086/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp