> The automute is not done by setting an alsamixer volume, it's usually
done by setting internal pin control registers which you can't see in
alsamixer.

the point is when headphone is plugged , headphone playback switch won't
unmuted automatically

do the driver really need to create headphone playback switch at audio
output when it use pinctl to mute/unmute ?


Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: N/A
  Amp-Out vals:  [0x65 0x65]
  Converter: stream=8, channel=0
  Power states: 
  Power: setting=D0, actual=D0
  Delay: 13 samples

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1234814

Title:
  [HP EliteBook 8760w, IDT 92HD81B1X5] automute when plugging in
  headphones mutes master channel

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  I am running kubuntu 13.10 on a hp 8760w laptop
  lspci identifies the soundcard as 
  00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family 
High Definition Audio Controller (rev 04)

  plugging in headphones causes the Master channel to drop to zero
  rather than the PCM channel, also when a new sound source connects to
  pulse-audio the pcm and master volumes switch. (I am using the kde
  mixer applet - to check the channels)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1234814/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to     : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to