I stopped and restarted in debug mode udisksd. The event arrives, then it
simply stops and does nothing.
Log from the daemon (inserting another USB stick, so it's sdd now):
14:28:17.122:[5681]:[NOTICE]: Acquired the name org.freedesktop.UDisks2 on the
system message bus [main.c:77, on_name_acquired()]
14:28:17.846:[5683]:[INFO]: Housekeeping complete [udiskslinuxprovider.c:973,
housekeeping_thread_func()]
14:28:34.725:[5681]:[DEBUG]: uevent add
/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-1/3-1:1.0/host12
[udiskslinuxprovider.c:902, udisks_linux_provider_handle_uevent()]
14:28:35.960:[5681]:[DEBUG]: uevent add
/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-1/3-1:1.0/host12/target12:0:0
[udiskslinuxprovider.c:902, udisks_linux_provider_handle_uevent()]
14:28:35.961:[5681]:[DEBUG]: uevent add
/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-1/3-1:1.0/host12/target12:0:0/12:0:0:0
[udiskslinuxprovider.c:902, udisks_linux_provider_handle_uevent()]
14:28:36.043:[5681]:[DEBUG]: uevent add
/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-1/3-1:1.0/host12/target12:0:0/12:0:0:0/block/sdd
[udiskslinuxprovider.c:902, udisks_linux_provider_handle_uevent()]
14:28:36.112:[5681]:[DEBUG]: uevent add
/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-1/3-1:1.0/host12/target12:0:0/12:0:0:0/block/sdd/sdd1
[udiskslinuxprovider.c:902, udisks_linux_provider_handle_uevent()]
will try to add udisks to this bug report.
** Also affects: nautilus-udisks (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1241811
Title:
USB disk not automatically mounted after upgrade to 13.10
Status in “nautilus” package in Ubuntu:
New
Status in “nautilus-udisks” package in Ubuntu:
New
Bug description:
Since the upgrade to 13.10, my laptop stopped mounting the USB devices
(and SD cards too) automatically.
Inserting the USB I have in the log:
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.570340] usb 3-2: new
high-speed USB device number 3 using xhci_hcd
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593170] usb 3-2: New USB
device found, idVendor=090c, idProduct=1000
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593181] usb 3-2: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593187] usb 3-2: Product:
Flash Disk
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593192] usb 3-2:
Manufacturer: USB
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593196] usb 3-2:
SerialNumber: FBF1009232400790
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593492] usb 3-2: ep 0x81 -
rounding interval to 128 microframes, ep desc says 255 microframes
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593501] usb 3-2: ep 0x2 -
rounding interval to 128 microframes, ep desc says 255 microframes
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.595232] scsi7 :
usb-storage 3-2:1.0
SYS: Oct 18 13:57:38 samsung-romano mtp-probe: checking bus 3, device 3:
"/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-2"
SYS: Oct 18 13:57:38 samsung-romano mtp-probe: bus: 3, device: 3 was not an
MTP device
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.834382] scsi 7:0:0:0:
Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.835894] sd 7:0:0:0:
Attached scsi generic sg3 type 0
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836227] sd 7:0:0:0: [sdc]
3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836910] sd 7:0:0:0: [sdc]
Write Protect is off
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836926] sd 7:0:0:0: [sdc]
Mode Sense: 43 00 00 00
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837665] sd 7:0:0:0: [sdc]
No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837676] sd 7:0:0:0: [sdc]
Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843552] sd 7:0:0:0: [sdc]
No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843562] sd 7:0:0:0: [sdc]
Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.844609] sdc: sdc1
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846982] sd 7:0:0:0: [sdc]
No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846990] sd 7:0:0:0: [sdc]
Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846997] sd 7:0:0:0: [sdc]
Attached SCSI removable disk
But after that nothing happens. I checked the dconf variables as per
https://help.ubuntu.com/community/Mount/USB but it's all correctly
set. I can mount the disk by hand:
% sudo mount /dev/sdc1 /mnt
% mount | grep mnt
/dev/sdc1 on /mnt type vfat (rw)
...and it works ok.
Add: using from command line udisks works, too:
(0)samsung-romano:~% udisks --mount /dev/sdc1
Mounted /org/freedesktop/UDisks/devices/sdc1 at /media/PENDRIVE
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1241811/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
