Unfortunately, it happens again. So it's seems is sort of random. Sometime it works, sometime not. If it works one time it works for all the session (at least). After the next reboot, you sometime have automounting working and sometime no.
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1241811 Title: USB disk not automatically mounted after upgrade to 13.10 Status in “nautilus” package in Ubuntu: Confirmed Status in “nautilus-udisks” package in Ubuntu: Confirmed Bug description: Since the upgrade to 13.10, my laptop stopped mounting the USB devices (and SD cards too) automatically. Inserting the USB I have in the log: SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.570340] usb 3-2: new high-speed USB device number 3 using xhci_hcd SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593170] usb 3-2: New USB device found, idVendor=090c, idProduct=1000 SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593181] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593187] usb 3-2: Product: Flash Disk SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593192] usb 3-2: Manufacturer: USB SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593196] usb 3-2: SerialNumber: FBF1009232400790 SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593492] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593501] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.595232] scsi7 : usb-storage 3-2:1.0 SYS: Oct 18 13:57:38 samsung-romano mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-2" SYS: Oct 18 13:57:38 samsung-romano mtp-probe: bus: 3, device: 3 was not an MTP device SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.834382] scsi 7:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.835894] sd 7:0:0:0: Attached scsi generic sg3 type 0 SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836227] sd 7:0:0:0: [sdc] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836910] sd 7:0:0:0: [sdc] Write Protect is off SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836926] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00 SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837665] sd 7:0:0:0: [sdc] No Caching mode page present SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837676] sd 7:0:0:0: [sdc] Assuming drive cache: write through SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843552] sd 7:0:0:0: [sdc] No Caching mode page present SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843562] sd 7:0:0:0: [sdc] Assuming drive cache: write through SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.844609] sdc: sdc1 SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846982] sd 7:0:0:0: [sdc] No Caching mode page present SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846990] sd 7:0:0:0: [sdc] Assuming drive cache: write through SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846997] sd 7:0:0:0: [sdc] Attached SCSI removable disk But after that nothing happens. I checked the dconf variables as per https://help.ubuntu.com/community/Mount/USB but it's all correctly set. I can mount the disk by hand: % sudo mount /dev/sdc1 /mnt % mount | grep mnt /dev/sdc1 on /mnt type vfat (rw) ...and it works ok. Add: using from command line udisks works, too: (0)samsung-romano:~% udisks --mount /dev/sdc1 Mounted /org/freedesktop/UDisks/devices/sdc1 at /media/PENDRIVE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1241811/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
