I too can confirm this problem on two different installations of Ubuntu
13.10.
lsusb -vd 14cd:6116
...
idVendor 0x14cd Super Top
idProduct 0x6116 M6116 SATA Bridge
bcdDevice 1.50
...
bmAttributes 0xc0
Self Powered
MaxPower 2mA
...
Note that the device reports 'self powered' and 2mA but it is in fact using
power from the USB hub. The device works with Windows XP on a the same PC (dual
boot).
I did make an unsuccessful attemp at downgrading udisks2 as described above. I
didn't dare to force the downgrade considering the number of dependencies.
tor@maxlap:~/Downloads$ sudo dpkg -i udisks2_2.0.0-1_i386.deb
dpkg: warning: downgrading udisks2 from 2.1.0-4 to 2.0.0-1
(Reading database ... 244438 files and directories currently installed.)
Preparing to replace udisks2 2.1.0-4 (using udisks2_2.0.0-1_i386.deb) ...
Unpacking replacement udisks2 ...
dpkg: dependency problems prevent configuration of udisks2:
udisks2 depends on libatasmart4 (>= 0.13).
udisks2 depends on libgudev-1.0-0 (>= 165); however:
Package libgudev-1.0-0:i386 is not installed.
udisks2 depends on libpolkit-agent-1-0 (>= 0.99); however:
udisks2 depends on libpolkit-gobject-1-0 (>= 0.101); however:
udisks2 depends on libudisks2-0; however:
dpkg: error processing udisks2 (--install):
dependency problems - leaving unconfigured
Processing triggers for man-db ...
Errors were encountered while processing:
udisks2
tor@maxlap:~
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to udisks2 in Ubuntu.
https://bugs.launchpad.net/bugs/1161985
Title:
Error sending ATA command IDENTIFY DEVICE
Status in ATA S.M.A.R.T. Disk Health Monitoring Library:
Confirmed
Status in “libatasmart” package in Ubuntu:
Confirmed
Status in “udisks2” package in Ubuntu:
Confirmed
Bug description:
I'm not able to mount my external HDD using Xubuntu 13.04 (udisks2),
not even while booting into a live medium. However, Windows 7 and
Ubuntu 12.04.2 (udisks) are able to mount the device without problem.
Syslog is showing following entries:
Mar 29 19:19:41 local kernel: [ 46.012101] usb 2-2: new high-speed USB
device number 5 using ehci-pci
Mar 29 19:19:41 local kernel: [ 46.145401] usb 2-2: New USB device found,
idVendor=14cd, idProduct=6116
Mar 29 19:19:41 local kernel: [ 46.145409] usb 2-2: New USB device strings:
Mfr=1, Product=3, SerialNumber=2
Mar 29 19:19:41 local kernel: [ 46.145412] usb 2-2: Product: USB 2.0 SATA
BRIDGE
Mar 29 19:19:41 local kernel: [ 46.145416] usb 2-2: Manufacturer: Super Top
Mar 29 19:19:41 local kernel: [ 46.145419] usb 2-2: SerialNumber:
M6116018VE15
Mar 29 19:19:41 local kernel: [ 46.153488] Initializing USB Mass Storage
driver...
Mar 29 19:19:41 local kernel: [ 46.153614] usbcore: registered new
interface driver usb-storage
Mar 29 19:19:41 local kernel: [ 46.153617] USB Mass Storage support
registered.
Mar 29 19:19:41 local kernel: [ 46.157283] scsi6 : usb-storage 2-2:1.0
Mar 29 19:19:41 local kernel: [ 46.157457] usbcore: registered new
interface driver ums-cypress
Mar 29 19:19:42 local kernel: [ 47.156812] scsi 6:0:0:0: Direct-Access
WDC WD32 00BEVT-22ZCT0 PQ: 0 ANSI: 0
Mar 29 19:19:42 local kernel: [ 47.157700] sd 6:0:0:0: Attached scsi
generic sg2 type 0
Mar 29 19:19:42 local kernel: [ 47.159898] sd 6:0:0:0: [sdb] 625142448
512-byte logical blocks: (320 GB/298 GiB)
Mar 29 19:19:42 local kernel: [ 47.160903] sd 6:0:0:0: [sdb] Write Protect
is off
Mar 29 19:19:42 local kernel: [ 47.160909] sd 6:0:0:0: [sdb] Mode Sense: 03
00 00 00
Mar 29 19:19:42 local kernel: [ 47.161741] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.161748] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.165016] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.165023] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.206914] sdb: sdb1 sdb2
Mar 29 19:19:42 local kernel: [ 47.209109] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.209115] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.209120] sd 6:0:0:0: [sdb] Attached SCSI
disk
Mar 29 19:19:50 local kernel: [ 54.928067] usb 2-2: reset high-speed USB
device number 5 using ehci-pci
Mar 29 19:19:50 local udisksd[1881]: Error probing device: Error sending ATA
command IDENTIFY DEVICE to /dev/sdb: Unexpected sense data returned:#0120000:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012
(g-io-error-quark, 0)
thad@local:~$ apt-cache policy udisks2
udisks2:
Installed: 2.1.0-2
Candidate: 2.1.0-2
Version table:
*** 2.1.0-2 0
500 http://archive.ubuntu.com/ubuntu/ raring/main amd64 Packages
100 /var/lib/dpkg/status
To manage notifications about this bug go to:
https://bugs.launchpad.net/libatasmart/+bug/1161985/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
