So i've been having this problem for a long time, with my OCZ Vertex 4
which i have since swapped for a 120GB Seagate Barracuda with an IDE to
SATA converter. Still getting the same problem which causes my system to
hang, and with the SSD to compleetly die reset, lose the disk, hang.
Here is some of my syslog if it helps
Apr 22 17:33:43 dan9550 kernel: [ 9186.674306] ata2.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6 frozen
Apr 22 17:33:43 dan9550 kernel: [ 9186.674316] ata2.00: failed command: SMART
Apr 22 17:33:43 dan9550 kernel: [ 9186.674326] ata2.00: cmd
b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
Apr 22 17:33:43 dan9550 kernel: [ 9186.674326] res
40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Apr 22 17:33:43 dan9550 kernel: [ 9186.674332] ata2.00: status: { DRDY }
Apr 22 17:33:43 dan9550 kernel: [ 9186.674339] ata2: hard resetting link
Apr 22 17:33:44 dan9550 kernel: [ 9187.670323] ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Apr 22 17:33:44 dan9550 kernel: [ 9187.677119] ata2.00: configured for UDMA/100
Apr 22 17:33:44 dan9550 kernel: [ 9187.677160] ata2: EH complete
Is there a workaround i could use to stop the OS sending this SMART
command to the drive?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to udisks2 in Ubuntu.
https://bugs.launchpad.net/bugs/1161985
Title:
Error sending ATA command IDENTIFY DEVICE
Status in ATA S.M.A.R.T. Disk Health Monitoring Library:
Confirmed
Status in “libatasmart” package in Ubuntu:
Confirmed
Status in “udisks2” package in Ubuntu:
Confirmed
Bug description:
I'm not able to mount my external HDD using Xubuntu 13.04 (udisks2),
not even while booting into a live medium. However, Windows 7 and
Ubuntu 12.04.2 (udisks) are able to mount the device without problem.
Syslog is showing following entries:
Mar 29 19:19:41 local kernel: [ 46.012101] usb 2-2: new high-speed USB
device number 5 using ehci-pci
Mar 29 19:19:41 local kernel: [ 46.145401] usb 2-2: New USB device found,
idVendor=14cd, idProduct=6116
Mar 29 19:19:41 local kernel: [ 46.145409] usb 2-2: New USB device strings:
Mfr=1, Product=3, SerialNumber=2
Mar 29 19:19:41 local kernel: [ 46.145412] usb 2-2: Product: USB 2.0 SATA
BRIDGE
Mar 29 19:19:41 local kernel: [ 46.145416] usb 2-2: Manufacturer: Super Top
Mar 29 19:19:41 local kernel: [ 46.145419] usb 2-2: SerialNumber:
M6116018VE15
Mar 29 19:19:41 local kernel: [ 46.153488] Initializing USB Mass Storage
driver...
Mar 29 19:19:41 local kernel: [ 46.153614] usbcore: registered new
interface driver usb-storage
Mar 29 19:19:41 local kernel: [ 46.153617] USB Mass Storage support
registered.
Mar 29 19:19:41 local kernel: [ 46.157283] scsi6 : usb-storage 2-2:1.0
Mar 29 19:19:41 local kernel: [ 46.157457] usbcore: registered new
interface driver ums-cypress
Mar 29 19:19:42 local kernel: [ 47.156812] scsi 6:0:0:0: Direct-Access
WDC WD32 00BEVT-22ZCT0 PQ: 0 ANSI: 0
Mar 29 19:19:42 local kernel: [ 47.157700] sd 6:0:0:0: Attached scsi
generic sg2 type 0
Mar 29 19:19:42 local kernel: [ 47.159898] sd 6:0:0:0: [sdb] 625142448
512-byte logical blocks: (320 GB/298 GiB)
Mar 29 19:19:42 local kernel: [ 47.160903] sd 6:0:0:0: [sdb] Write Protect
is off
Mar 29 19:19:42 local kernel: [ 47.160909] sd 6:0:0:0: [sdb] Mode Sense: 03
00 00 00
Mar 29 19:19:42 local kernel: [ 47.161741] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.161748] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.165016] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.165023] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.206914] sdb: sdb1 sdb2
Mar 29 19:19:42 local kernel: [ 47.209109] sd 6:0:0:0: [sdb] No Caching
mode page present
Mar 29 19:19:42 local kernel: [ 47.209115] sd 6:0:0:0: [sdb] Assuming drive
cache: write through
Mar 29 19:19:42 local kernel: [ 47.209120] sd 6:0:0:0: [sdb] Attached SCSI
disk
Mar 29 19:19:50 local kernel: [ 54.928067] usb 2-2: reset high-speed USB
device number 5 using ehci-pci
Mar 29 19:19:50 local udisksd[1881]: Error probing device: Error sending ATA
command IDENTIFY DEVICE to /dev/sdb: Unexpected sense data returned:#0120000:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012
(g-io-error-quark, 0)
thad@local:~$ apt-cache policy udisks2
udisks2:
Installed: 2.1.0-2
Candidate: 2.1.0-2
Version table:
*** 2.1.0-2 0
500 http://archive.ubuntu.com/ubuntu/ raring/main amd64 Packages
100 /var/lib/dpkg/status
To manage notifications about this bug go to:
https://bugs.launchpad.net/libatasmart/+bug/1161985/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
