Understood. I will follow your advice. I will continue to file bugs on Launchpad sine it will make it easier for me to track them. Thanks ;-)
On Thu, Jan 22, 2015 at 10:22 AM, Sebastien Bacher <[email protected]> wrote: > Often bugs are in the upstream code and not the in distribution changes, > there is no automatic way to figure where the issue is though. You are > welcome to open bugs on launchpad if you prefer, it's just that e.g vino > doesn't have anybody actively working on it in Ubuntu so you might have > better chances to get issues resolved by talking directly to the > software writers > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1412066 > > Title: > Cannot configure the vino-server "security type" control > > Status in vino package in Ubuntu: > New > > Bug description: > I was setting up a testcase for gnome's vino server. Vino had to be > tested to confirm it works at the basic level of vnc connection. > > Packages installed: vino, xvnc4viewer > > After installing vino and xvnc4viewer, in lubuntu, (xubuntu with > lubuntu-desktop installed). The vino-server was started in Lubuntu > 14.04 using this following command: /usr/lib/vino/vino-server &. This > is the output of the following command. > > (vino-server:16269): WARNING **: Couldn't connect to accessibility > bus: Failed to connect to socket /tmp/dbus-3lXPtqLo8q: Connection > refused > > (vino-server:16269): EggSMClient-CRITICAL **: egg_sm_client_set_mode: > assertion 'global_client == NULL || global_client_mode == > EGG_SM_CLIENT_MODE_DISABLED' failed > 17/01/2015 04:39:40 PM WARNING: Width (1366) is not a multiple of 4. > VncViewer has problems with that. > 17/01/2015 04:39:42 PM Autoprobing TCP port in (all) network interface > 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 > 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 > 17/01/2015 04:39:42 PM Autoprobing selected port 5900 > 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) > 17/01/2015 04:39:42 PM Re-binding socket to listen for VNC connections > on TCP port 5900 in (all) interface > 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 > 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 > 17/01/2015 04:39:42 PM Clearing securityTypes > 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) > 17/01/2015 04:39:42 PM Clearing securityTypes > 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) > 17/01/2015 04:39:42 PM Advertising authentication type: 'No > Authentication' (1) > 17/01/2015 04:39:42 PM Re-binding socket to listen for VNC connections > on TCP port 5900 in (all) interface > 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 > 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 > > I have read multiple tutorials outlining procedures to enable and > connect to a vino-server. In all instructions, "ssh" was used to > establish the connection. This is the form of the command to connect > to a vino-server. > > "ssh -L 12345:localhost:5900 username@ipaddress". > > I tried testing vino on my own laptop by connecting to itself. > > Whenever I performed the connection with or without ssh, I always get > this output from the server: > > 17/01/2015 04:19:08 PM [IPv4] Got connection from client localhost > 17/01/2015 04:19:08 PM other clients: > 17/01/2015 04:19:09 PM WARNING: New width (1366) is not a multiple of 4. > 17/01/2015 04:19:09 PM Client Protocol Version 3.7 > 17/01/2015 04:19:09 PM Advertising security type 18 > 17/01/2015 04:19:09 PM Client localhost gone > 17/01/2015 04:19:09 PM Statistics: > 17/01/2015 04:19:09 PM framebuffer updates 0, rectangles 0, bytes 0 > > This was after I used the command, ssh -L 12345:localhost:5900 > username@ipaddress > > I get this output after I typed xvnc4viewer from my local terminal: > > CConn: connected to host 172.29.24.129 port 5900 > CConnection: Server supports RFB protocol version 3.7 > CConnection: Using RFB protocol version 3.7 > CConnection: No matching security types > main: No matching security types > > It seems the problem is that I cannot establish a successful > connection unless I am using the same security type. I could not find > a way to configure the vino-server to change or remove the security > type. There was no manpage for the vino-server. A manpage for the > vino-server is needed, updated setup howto for all variants of ubuntu > and an advanced configuration file for the vino-server to modify how > it runs and behaves. > > From QA member Istimsak Abdulbasir (sak) > > ProblemType: Bug > DistroRelease: Ubuntu 14.04 > Package: vino 3.8.1-0ubuntu1 > ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12 > Uname: Linux 3.13.0-44-generic i686 > ApportVersion: 2.14.1-0ubuntu3.6 > Architecture: i386 > CurrentDesktop: LXDE > Date: Sat Jan 17 17:01:18 2015 > EcryptfsInUse: Yes > InstallationDate: Installed on 2015-01-09 (8 days ago) > InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release i386 > (20140416.2) > SourcePackage: vino > UpgradeStatus: No upgrade log present (probably fresh install) > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/vino/+bug/1412066/+subscriptions > -- "Collaboration is the new innovation" (Istimsak Abdulbasir, 2013) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to vino in Ubuntu. https://bugs.launchpad.net/bugs/1412066 Title: Cannot configure the vino-server "security type" control Status in vino package in Ubuntu: New Bug description: I was setting up a testcase for gnome's vino server. Vino had to be tested to confirm it works at the basic level of vnc connection. Packages installed: vino, xvnc4viewer After installing vino and xvnc4viewer, in lubuntu, (xubuntu with lubuntu-desktop installed). The vino-server was started in Lubuntu 14.04 using this following command: /usr/lib/vino/vino-server &. This is the output of the following command. (vino-server:16269): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-3lXPtqLo8q: Connection refused (vino-server:16269): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion 'global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed 17/01/2015 04:39:40 PM WARNING: Width (1366) is not a multiple of 4. VncViewer has problems with that. 17/01/2015 04:39:42 PM Autoprobing TCP port in (all) network interface 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 17/01/2015 04:39:42 PM Autoprobing selected port 5900 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) 17/01/2015 04:39:42 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 17/01/2015 04:39:42 PM Clearing securityTypes 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) 17/01/2015 04:39:42 PM Clearing securityTypes 17/01/2015 04:39:42 PM Advertising security type: 'TLS' (18) 17/01/2015 04:39:42 PM Advertising authentication type: 'No Authentication' (1) 17/01/2015 04:39:42 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 17/01/2015 04:39:42 PM Listening IPv6://[::]:5900 17/01/2015 04:39:42 PM Listening IPv4://0.0.0.0:5900 I have read multiple tutorials outlining procedures to enable and connect to a vino-server. In all instructions, "ssh" was used to establish the connection. This is the form of the command to connect to a vino-server. "ssh -L 12345:localhost:5900 username@ipaddress". I tried testing vino on my own laptop by connecting to itself. Whenever I performed the connection with or without ssh, I always get this output from the server: 17/01/2015 04:19:08 PM [IPv4] Got connection from client localhost 17/01/2015 04:19:08 PM other clients: 17/01/2015 04:19:09 PM WARNING: New width (1366) is not a multiple of 4. 17/01/2015 04:19:09 PM Client Protocol Version 3.7 17/01/2015 04:19:09 PM Advertising security type 18 17/01/2015 04:19:09 PM Client localhost gone 17/01/2015 04:19:09 PM Statistics: 17/01/2015 04:19:09 PM framebuffer updates 0, rectangles 0, bytes 0 This was after I used the command, ssh -L 12345:localhost:5900 username@ipaddress I get this output after I typed xvnc4viewer from my local terminal: CConn: connected to host 172.29.24.129 port 5900 CConnection: Server supports RFB protocol version 3.7 CConnection: Using RFB protocol version 3.7 CConnection: No matching security types main: No matching security types It seems the problem is that I cannot establish a successful connection unless I am using the same security type. I could not find a way to configure the vino-server to change or remove the security type. There was no manpage for the vino-server. A manpage for the vino-server is needed, updated setup howto for all variants of ubuntu and an advanced configuration file for the vino-server to modify how it runs and behaves. From QA member Istimsak Abdulbasir (sak) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: vino 3.8.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12 Uname: Linux 3.13.0-44-generic i686 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: i386 CurrentDesktop: LXDE Date: Sat Jan 17 17:01:18 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-01-09 (8 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20140416.2) SourcePackage: vino UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vino/+bug/1412066/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
