/etc/lird.conf #This configuration has been automatically generated via #the Ubuntu LIRC package maintainer scripts. # #It includes the default configuration for the remote and/or #transmitter that you have selected during package installation. # #Feel free to add any custom remotes to the configuration #via additional include directives or below the existing #Ubuntu include directives from your selected remote and/or #transmitter.
#No default remote configuration was included for TechnoTrend USB IR receiver #You will need to include your own custom configuration for #this remote, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug #No default remote configuration was included for Custom #You will need to include your own custom configuration for #this transmitter, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug # # # # this config file was automatically generated # using lirc-0.8.3(default) on Wed Jul 2 21:51:15 2008 # # contributed by # # brand: Technotrend # model no. of remote control: # devices being controlled by this remote: TV-Card # begin remote name Technotrend bits 6 flags RC5|CONST_LENGTH eps 30 aeps 100 one 889 889 zero 889 889 plead 889 pre_data_bits 7 pre_data 0x55 gap 113792 toggle_bit 2 frequency 36000 duty_cycle 50 begin codes KEY_POWER 0x01 # Was: Power KEY_MUTE 0x18 # Was: Mute KEY_1 0x03 # Was: 1 KEY_2 0x04 # Was: 2 KEY_3 0x05 # Was: 3 KEY_4 0x06 # Was: 4 KEY_5 0x07 # Was: 5 KEY_6 0x08 # Was: 6 KEY_7 0x09 # Was: 7 KEY_8 0x0A # Was: 8 KEY_9 0x0B # Was: 9 KEY_0 0x0C # Was: 0 KEY_AUDIO 0x1A # Was: Audio KEY_AGAIN 0x02 # Was: Repeat KEY_VOLUMEDOWN 0x26 # Was: vol- KEY_VOLUMEUP 0x25 # Was: vol+ KEY_TEXT 0x19 # Was: Text KEY_CHANNELDOWN 0x24 # Was: ch- KEY_CHANNELUP 0x23 # Was: ch+ KEY_EXIT 0x13 # Was: Exit KEY_OK 0x0F # Was: OK KEY_UP 0x0D # Was: Up KEY_DOWN 0x11 # Was: Down KEY_LEFT 0x0E # Was: Left KEY_RIGHT 0x10 # Was: Right KEY_RED 0x14 # Was: Red KEY_GREEN 0x15 # Was: Green KEY_YELLOW 0x16 # Was: Yellow KEY_BLUE 0x17 # Was: Blue KEY_RECORD 0x3A # Was: Record KEY_PLAY 0x3B # Was: Play KEY_STOP 0x3C # Was: Stop KEY_INFO 0x12 # Was: Info KEY_REWIND 0x3D # Was: Rew KEY_PAUSE 0x3E # Was: Pause KEY_FORWARD 0x3F # Was: Fwd KEY_EPG 0x22 # Was: EPG end codes end remote -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lirc in Ubuntu. https://bugs.launchpad.net/bugs/1605934 Title: LIRC-Infrarot-Fernbedienung mit TV-Karte TT-budget CT2-4500 CI funktioniert nicht Status in lirc package in Ubuntu: New Bug description: 1) Ubuntu Mate 16.04 LTS ---------------------------- lsb_release -rd Description: Ubuntu 16.04.1 LTS Release: 16.04 2) ---------------------------------------------------- apt-cache policy lirc lirc: Installiert: 0.9.0-0ubuntu6 Installationskandidat: 0.9.0-0ubuntu6 Versionstabelle: *** 0.9.0-0ubuntu6 500 500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages 100 /var/lib/dpkg/status sudo apt-cache policy inputlirc inputlirc: Installiert: 23-2 Installationskandidat: 23-2 Versionstabelle: *** 23-2 500 500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages 100 /var/lib/dpkg/status sudo apt-cache policy lirc-x lirc-x: Installiert: 0.9.0-0ubuntu6 Installationskandidat: 0.9.0-0ubuntu6 Versionstabelle: *** 0.9.0-0ubuntu6 500 500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages 100 /var/lib/dpkg/status 3) I expeted that this tv-card functions, because it is said that it is supported: https://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-budget_CT2-4500_CI The tv-card fworks but not the remote control. 4) Further information: ----------------------------------------------------- dmesg | grep Technotrend [ 3.731462] CORE cx23885[0]: subsystem: 13c2:3013, board: Technotrend TT-budget CT2-4500 CI [card=48,autodetected] [ 4.577822] Technotrend TT-budget CT2-4500 CI MAC address: bc:ea:2b:45:04:dd -------------------------------------------------- /etc/lircd.conf #This configuration has been automatically generated via #the Ubuntu LIRC package maintainer scripts. # #It includes the default configuration for the remote and/or #transmitter that you have selected during package installation. # #Feel free to add any custom remotes to the configuration #via additional include directives or below the existing #Ubuntu include directives from your selected remote and/or #transmitter. #No default remote configuration was included for TechnoTrend USB IR receiver #You will need to include your own custom configuration for #this remote, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug #No default remote configuration was included for Custom #You will need to include your own custom configuration for #this transmitter, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug ------------------------------------- /etc/hardware.conf # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="TechnoTrend USB IR receiver" REMOTE_MODULES="lirc_dev lirc_ttusbir" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="Custom" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Disable kernel support. #Typically, lirc will disable in-kernel support for ir devices in order to #handle them internally. Set to false to prevent lirc from disabling this #in-kernel support. #DISABLE_KERNEL_SUPPORT="true" #Enable lircd #START_LIRCD="true" START_LIRCD="" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" ------------------------------------------------- /etc/lircmd.conf #UNCONFIGURED # # To find out how to get a proper configuration file please read: # # /usr/share/doc/lirc/README.Debian ---------------------------------------------------- lspci -v (Section) 03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Technotrend Systemtechnik GmbH TT-budget CT2-4500 CI Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at df200000 (64-bit, non-prefetchable) [size=2M] Capabilities: <access denied> Kernel driver in use: cx23885 Kernel modules: cx23885 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/1605934/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
