To pitch in; I use that rolfsbensch PPA, version 1.0.26-git20160803-trusty1; that is newer than their newest release of 1.0.25 (which is 11 months old...). What version does Ubuntu daily have now?
In any case, I'm still having issues with my LiDE 110, so this problem is likely not resolved. It mostly works somewhat (it sometimes stops responding), but just two days ago, it was refusing to do anything. It took me an hour of retrying and then suddenly it worked. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to sane-backends in Ubuntu. https://bugs.launchpad.net/bugs/1184699 Title: Canon LIDE 110 can only scan once, then I need to replug the usb cable Status in sane-backends package in Ubuntu: Incomplete Bug description: I have a Canon LIDE 110 scanner which works by default on ubuntu 13.04. The problem is after first scan, I can not scan for second time. I need to reconnect the USB cable to use the scanner again. # TEST 1 : without reconnecting the usb cable francois@pc:~$ scanimage -v > test1.jpg # success scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total # I don't unplug plug the usb cable. francois@pc:~$ scanimage -v > test2.jpg # FAIL scanimage: no SANE devices found # TEST 2 : reconnect usb cable between scan attempts francois@pc:~$ scanimage -v > test1.jpg # success scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total # I unplug and replug the usb cable. francois@pc:~$ scanimage -v > test2.jpg # SUCCESS scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total francois@pc:~$ dmesg # extract [ 829.365158] usb 3-1: USB disconnect, device number 2 [ 834.935000] usb 3-1: new high-speed USB device number 4 using xhci_hcd [ 834.952515] usb 3-1: New USB device found, idVendor=04a9, idProduct=1909 [ 834.952519] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 834.952522] usb 3-1: Product: CanoScan [ 834.952524] usb 3-1: Manufacturer: Canon [ 1623.738811] usb 3-1: USB disconnect, device number 4 [ 1623.739072] xhci_hcd 0000:00:14.0: Slot 3 endpoint 6 not removed from BW list! [ 1625.528827] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 1625.546327] usb 3-1: New USB device found, idVendor=04a9, idProduct=1909 [ 1625.546331] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1625.546334] usb 3-1: Product: CanoScan [ 1625.546336] usb 3-1: Manufacturer: Canon francois@pc:~$ uname -a && cat /etc/issue Linux pc 3.8.0-22-generic #33-Ubuntu SMP Thu May 16 15:17:14 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Ubuntu 13.04 \n \l The problem was reported here by someone else : http://askubuntu.com/questions/278473/canon-lide-110-should-reconnect- usb-for-each-scan Thanks François To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1184699/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp