Hi, the initial error report of 2009 is probably due to a hardware problem in the computers bus controller, or the cabling, or the drive's bus controller.
> BraseroWodim stderr: CDB: 2A 00 00 01 6C 7E 00 00 1F 00 > ... > BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11 > ... > BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 > 00 00 > ... > BraseroWodim stderr: Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 wodim reported the error wrongly, because it does not recognize the error message format, which is not supposed to be issued by a CD drive. The error codes are rather: Key= 0xB, ASC= 0, ASCQ= 0. This means "Command aborted". I.e. Linux decided to abort the WRITE transaction to block 0x16C7E = 93310. No reason given. (Maybe in dmesg ?) One can find several reports about this error message and its misinterpretation by cdrecord, wodim, or growisofs. Whatever, the error is neither the fault of Brasero nor of the burn program wodim. --------------------------------------------------------------------------- > https://ubuntuforums.org/showthread.php?p=7493563 The drive reports that it is not ready to write to block 0x256B = 9579. That's a drive internal problem. --------------------------------------------------------------------------- > https://ubuntuforums.org/showthread.php?t=1197582 This is simply a Medium Error, i.e. a problem between drive and medium. No software on the Linux side of the cable is to blame. --------------------------------------------------------------------------- > https://lists.ubuntu.com/archives/ubuntu-users/2009-April/179336.html Totally unrelated. --------------------------------------------------------------------------- > https://answers.launchpad.net/ubuntu/+source/brasero/+question/76444 The drive reports that it is not ready to write to block 0x1F9B = 8091. About the same problem as in https://ubuntuforums.org/showthread.php?p=7493563 --------------------------------------------------------------------------- > BraseroCDRecord stderr: cdrecord: Input/output error. write_g1: scsi sendcmd: no error That's what cdrecord and wodim say when they get Key=0xB in the unexpected error reply format. --------------------------------------------------------------------------- > https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/comments/10 > > BraseroWodim stderr: Sense Key: 0x4 Hardware Error, deferred error, Segment 0 > ... > BraseroWodim stderr: Sense Code: 0x09 Qual 0x00 (track following error) Fru This is a problem between drive and medium, reported in the expected format. --------------------------------------------------------------------------- > https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/comments/11/+download > > BraseroCDRecord stderr: Sense Key: 0x5 Illegal Request, Segment 0 > ... > BraseroCDRecord stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - > incompatible format) Fru 0x0 The drive did not like the mediumi state. Maybe it was already written. --------------------------------------------------------------------------- Finally the report of today: > https://launchpadlibrarian.net/331859195/brasero-session.log > > BraseroCDRecord stderr: Sense Key: 0x3 Medium Error, Segment 0 > ... > BraseroCDRecord stderr: Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 The drive perceived an error when trying to write to the medium. Block address was 0xFFFFFF6A = -150. Strange as it is, -150 is the normal start address for a CD SAO run. So no fault of the burn program. --------------------------------------------------------------------------- So these bug reports are all about poorly working busses, drives, or media. Not a single software bug in userland is to see. Else i would advise to try the libburn backend of Brasero. But in the cases reported here, success could only happen by incident when the busses, drives, and media are in better mood. Have a nice day :) Thomas -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/397412 Title: brasero fails when burning DVD Status in brasero package in Ubuntu: Confirmed Bug description: Binary package hint: brasero wodim brasero 2.26.1 on ubuntu 9.04 jaunty, all updates applied as of July 09, 2009. DVD ISO images, both DVD-Video and DVD-ROM images, fail to burn, data discs created in brasero also fail. A sample brasero log follows, in this instance the image was of a 4.1Gb DVD-Video. I have been living with this problem since upgrading from ubuntu 8.10 (in which brasero worked fine). I dual-boot with Windows XP and the same image writes ok using Nero on the same hardware, using media from the same spindle. ---brasero log start--- Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_PBU5WU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=8 driveropts=burnfree -dao fs=16m -data -nopad /home/noel/Desktop/dvd.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type : Removable CD-ROM BraseroWodim stdout: Version : 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info : 'PIONEER ' BraseroWodim stdout: Identification : 'DVD-RW DVR-217 ' BraseroWodim stdout: Revision : '1.05' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) BraseroWodim stdout: Profile: 0x0002 (Removable disk) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). BraseroWodim stdout: Driver flags : SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: PACKET SAO BraseroWodim stdout: Drive buf size : 1605632 = 1568 KB BraseroWodim stdout: FIFO size : 16777216 = 16384 KB BraseroWodim stderr: Speed set to 11080 KB/s BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Track 01: data 4269 MB BraseroWodim stdout: Total size: 4903 MB (485:47.12) = 2186034 sectors BraseroWodim stdout: Lout start: 4903 MB (485:49/09) = 2186034 sectors BraseroWodim stdout: Current Secsize: 2048 BraseroWodim stdout: HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. BraseroWodim stdout: Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 112462 BraseroWodim stdout: Starting to write CD/DVD at speed 8.0 in real SAO mode for single session. BraseroWodim stdout: Last chance to quit, starting real write in 4 seconds. BraseroWodim called brasero_job_set_dangerous BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 3 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 2 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 1 seconds. 0 seconds. Operation starts. BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready. BraseroWodim stdout: Performing OPC... BraseroWodim stdout: Sending CUE sheet... BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Starting new track at sector: 0 BraseroWodim stdout: BraseroWodim stdout: Track 01: 0 of 4269 MB written. BraseroWodim stdout: Track 01: 1 of 4269 MB written (fifo 98%) [buf 67%] 23.6x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 2 of 4269 MB written (fifo 99%) [buf 99%] 0.1x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 3 of 4269 MB written (fifo 99%) [buf 99%] 6.4x. . . (removed these redundant parts to save space) . BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 177 of 4269 MB written (fifo 100%) [buf 98%] 6.1x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 178 of 4269 MB written (fifo 99%) [buf 98%] 6.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 179 of 4269 MB written (fifo 100%) [buf 98%] 6.0x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 180 of 4269 MB written (fifo 99%) [buf 98%] 6.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 181 of 4269 MB written (fifo 99%) [buf 98%] 6.0x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stderr: CDB: 2A 00 00 01 6C 7E 00 00 1F 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 0.336s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: A write error occured. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Please properly read the error message above. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Track 01: 182 of 4269 MB written (fifo 100%) [buf 96%] 5.9x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: write track data: error after 191098880 bytes BraseroWodim stdout: Writing time: 53.636s BraseroWodim stdout: Average write speed 73.8x. BraseroWodim stdout: Min drive buffer fill was 93% BraseroWodim stdout: Fixating... BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Fixating time: 1.021s BraseroWodim stderr: wodim: fifo had 3265 puts and 3011 gets. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: fifo was 0 times empty and 955 times full, min fill was 96%. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: HUP BraseroWodim stderr: HUP BraseroWodim process finished with status 254 BraseroWodim called brasero_job_error BraseroWodim finished with an error BraseroWodim asked to stop because of an error error = 0 message = "no message" BraseroWodim stopping BraseroWodim got killed Session error : unknown (brasero_burn_record burn.c:2602) ---brasero log end--- ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 ExecutablePath: /usr/bin/brasero NonfreeKernelModules: nvidia Package: brasero 2.26.1-0ubuntu1 ProcEnviron: LANG=en_AU.UTF-8 SHELL=/bin/bash SourcePackage: brasero Uname: Linux 2.6.28-13-generic i686 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
