Thanks. Please also test "Ubuntu on Wayland" to be sure. It sounds like the problem is specific to Xorg but we need to be sure it's not the kernel.
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1862281 Title: Repeatable hang within 5 minutes using stress-ng + sleep + usb mouse Status in linux package in Ubuntu: Incomplete Status in xorg-server package in Ubuntu: Incomplete Bug description: If I run a thermal transition test script (30 seconds stress-ng, 30 seconds sleep, in a loop) and move a local USB mouse, Kubuntu reliably crashes, usually in the first couple of runs and almost 100% of the time by run 6. This appears to be hardware-linked, but not due to a specific piece of bad hardware: I have swapped literally every piece of hardware in the system. It shows up (while running the script at the end): - On both an MSI B450 Gaming plus max and MSI MPG X570 Gaming plus mainboard. - On both an AMD Ryzen 5 3600 and 3600X CPU. - With one or two sticks of RAM. I've tested both sticks individually, in more than one mainboard slot. - Regardless of whether the mainboard is in/attached to a case. - Regardless of whether there is an m.2 SSD installed or I'm running off a live Kubuntu 19.10 USB stick with no hard disk attached. - Regardless of which of two mice I use (an old Logitech one, or a GTX 133 Gaming mouse). - Regardless of whether I'm using a Corsair VS650 or Corsair AX850 PSU. - Regardless of whether I'm using an AMD RX 5700 XT or using an Nvidia Gigabyte GeForce RTX 2700 Super (with open source drivers in both cases). - Regardless of whether I'm using KDE or XFCE. - Regardless of whether I'm using the default KDE DM or switch to GDM3 and set WaylandEnable=false. - Regardless of whether I use the default 5.3.0-29-generic kernel or 5.4.17-050417-generic. - Regardless of whether I go directly into the graphical environment or start in runlevel 3 and then manually run startx. - Regardless of whether it's on the rising or falling edge of the stress-script's temperature changes. - Regardless of bios version on the X570 mainboard (the one it shipped with, or the newest one released in January 2020). - Regardless of whether XMP is on or off in the bios. - Regardless of whether I use the default or set global c-state to "control = disabled" in the bios. - Regardless of whether I add processor.max_cstate=5 idle=halt in grub. - Regardless of whether or not speakers are plugged in. - Regardless of whether I'm using a USB port that is directly on the motherboard or is on the front of the case. - Regardless of which monitor it is attached to. It doesn't show up: - On an old i7-4771 machine I have, also running Kubuntu 19.10, while running the test script. - When I use a mouse remotely with ssh -Y [ip of the machine I am reporting this from] xeyes, while running the test script. - When I do non-mouse USB input, ie via a USB keyboard or USB wifi dongle, including under saturated network load, while running the test script. - During stress tests of the GPU, CPU, etc. Tools like memtest, mprime, Unigine Superposition, repeated kernel compiles, etc run stably overnight. - When the system is entirely idle aside from mouse movement. - When I start in runlevel 3 and run the same test script, using the mouse with gpm. - Running the same test script without mouse movement: this was stable overnight, then crashed within a couple of minutes of moving the mouse. It shows up with load other than the stress-ng+sleep script too, but much less reliably - I'm writing this bug report on the relevant machine, with firefox open. Crashes occur at least once a week under these conditions, but not frequently. Crashes occur with sensor-reported CPU temperatures of 32 to 41 degrees Celsius. Nothing is overheating, and the system is stable at much higher temperatures under sustained stress tests. The symptoms of the crash: the display stops updating and the system does not respond to any further input, including via the network or magic sysrq key. There is nothing related to it in syslog or journalctl, including when I'm running journalctl -f at the time of the crash. The test script: #!/bin/bash for x in {1..10000} do echo "Run $x at `date`" stress-ng --cpu 12 --cpu-method all --verify -t 30s --metrics-brief sleep 30 done ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: xorg 1:7.7+19ubuntu12 Uname: Linux 5.4.17-050417-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: KDE Date: Fri Feb 7 00:02:22 2020 DistUpgraded: Fresh install DistroCodename: eoan DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation Device [10de:1e84] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:4008] InstallationDate: Installed on 2020-01-30 (7 days ago) InstallationMedia: Kubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Micro-Star International Co., Ltd. MS-7C37 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.17-050417-generic root=UUID=1a1a3bcc-cc59-4982-a1f5-f721ef6fe937 ro quiet splash acpi_enforce_resources=lax vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/08/2020 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A.71 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MPG X570 GAMING PLUS (MS-7C37) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 2.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA.71:bd01/08/2020:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C37:pvr2.0:rvnMicro-StarInternationalCo.,Ltd.:rnMPGX570GAMINGPLUS(MS-7C37):rvr2.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr2.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7C37 dmi.product.sku: To be filled by O.E.M. dmi.product.version: 2.0 dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.99-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.2.8-0ubuntu0~19.10.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.5+git20191008-0ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-1ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1862281/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
