> From: dev <[email protected]> On Behalf Of
> [email protected]
> Sent: Sunday 3 October 2021 21:25
> To: [email protected]; [email protected]
> Cc: [email protected]; Pavan Nikhilesh <[email protected]>
> Subject: [dpdk-dev] [PATCH v4 1/3] examples/l3fwd: increase number of
> routes
>
> From: Pavan Nikhilesh <[email protected]>
>
> Increase the number of routes from 8 to 16 that are statically added for
> lpm and em mode as most of the SoCs support more than 8 interfaces.
> The number of routes added is equal to the number of ethernet devices
> ports enabled through port mask.
>
> Signed-off-by: Pavan Nikhilesh <[email protected]>
> ---
<snip>
> /*
> * 2001:200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180).
> - * 2001:200:0:{0-7}::/64 = Port {0-7}
> + * 2001:200:0:{0-15}::/64 = Port {0-15}
Hi Pavan,
IPv6 addresses are given in hex so the above comment should be:
2001:200:0:{0-f}::/64 = Port {0-15}
The ipv6_l3fwd_route_array below is correct however.
Thanks,
Conor.
> */
> const struct ipv6_l3fwd_route ipv6_l3fwd_route_array[] = {
> {{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 0},
> @@ -205,6 +213,14 @@ const struct ipv6_l3fwd_route
> ipv6_l3fwd_route_array[] = {
> {{32, 1, 2, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 5},
> {{32, 1, 2, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 6},
> {{32, 1, 2, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 7},
> + {{32, 1, 2, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 8},
> + {{32, 1, 2, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 9},
> + {{32, 1, 2, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 10},
> + {{32, 1, 2, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 11},
> + {{32, 1, 2, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 12},
> + {{32, 1, 2, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 13},
> + {{32, 1, 2, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 14},
> + {{32, 1, 2, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 15},
> };
