On Thu, Oct 14, 2010 at 2:25 PM, Ryan Gies <r...@livesite.net> wrote: > Cannot create make file directly. (Q: Is this suppose to work?)
Forking this thread despite my other answers. Can you post 'perldoc -l Apache2::Build'? I think your environment may not have Apache2::Build in your @INC. I just reviewed the Makefile.PL for Apache::Test and it doesn't look in the mod_perl src lib, so if you try to build without mod_perl installed you get that error. I removed my module and was able to repeat the error. ph...@pooky ~/dev/svn/modperl/mod_perl-2.0/Apache-Test $ rm /Users/phred/dev/perl-5.12.2/lib/site_perl/5.12.2/darwin-2level/Apache2/Build.pm override r--r--r-- phred/phred for /Users/phred/dev/perl-5.12.2/lib/site_perl/5.12.2/darwin-2level/Apache2/Build.pm? y ph...@pooky ~/dev/svn/modperl/mod_perl-2.0/Apache-Test $ Can't locate Apache2/Build.pm in @INC (@INC contains: lib /Users/phred/dev/perl-5.12.2/lib/site_perl/5.12.2/darwin-2level /Users/phred/dev/perl-5.12.2/lib/site_perl/5.12.2 /Users/phred/dev/perl-5.12.2/lib/5.12.2/darwin-2level /Users/phred/dev/perl-5.12.2/lib/5.12.2 .) at lib/Apache/TestConfig.pm line 34. BEGIN failed--compilation aborted at lib/Apache/TestConfig.pm line 35. Compilation failed in require at lib/Apache/TestMM.pm line 22. BEGIN failed--compilation aborted at lib/Apache/TestMM.pm line 22. Compilation failed in require at Makefile.PL line 17. BEGIN failed--compilation aborted at Makefile.PL line 17. > > Steps > ----- > > svn checkout https://svn.apache.org/repos/asf/perl/modperl/trunk/ > mod_perl-2.0 > cd mod_perl-2.0/Apache-Test/ > perl Makefile.PL > > Result > ------ > > Can't locate Apache2/Build.pm in @INC (@INC contains: lib /code/src/lib/perl > /usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi > /usr/local/lib/perl5/site_perl/5.10.0 > /usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi > /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl > /usr/lib/perl5/5.10.0/i386-linux-thread-multi /usr/lib/perl5/5.10.0 > /usr/lib/perl5/site_perl .) at lib/Apache/TestConfig.pm line 34. > BEGIN failed--compilation aborted at lib/Apache/TestConfig.pm line 35. > Compilation failed in require at lib/Apache/TestMM.pm line 22. > BEGIN failed--compilation aborted at lib/Apache/TestMM.pm line 22. > Compilation failed in require at Makefile.PL line 17. > BEGIN failed--compilation aborted at Makefile.PL line 17. > > > > On 10/14/2010 04:19 PM, Fred Moyer wrote: >> >> FYI - just committed this major revision. If you have an active >> Apache::Test trunk checkout, please update and run the tests. >> >> The goal here is to make Apache::Test easier to use, and bring the >> overall quality up to a point where people feel confident using it. >> >> >> ---------- Forwarded message ---------- >> From:<ph...@apache.org> >> Date: Thu, Oct 14, 2010 at 1:17 PM >> Subject: svn commit: r1022689 - in /perl/Apache-Test/trunk: Changes >> MANIFEST Makefile.PL lib/Apache/TestConfig.pm lib/Apache/TestRun.pm >> To: test-comm...@perl.apache.org >> >> >> Author: phred >> Date: Thu Oct 14 20:17:26 2010 >> New Revision: 1022689 >> >> URL: http://svn.apache.org/viewvc?rev=1022689&view=rev >> Log: >> Remove the interactive configuration. >> Remove the custom configuration option, instead relying on PATH and ENV >> variables to configure Apache::Test based on runtime settings. >> >> Modified: >> perl/Apache-Test/trunk/Changes >> perl/Apache-Test/trunk/MANIFEST >> perl/Apache-Test/trunk/Makefile.PL >> perl/Apache-Test/trunk/lib/Apache/TestConfig.pm >> perl/Apache-Test/trunk/lib/Apache/TestRun.pm >> >> Modified: perl/Apache-Test/trunk/Changes >> URL: >> http://svn.apache.org/viewvc/perl/Apache-Test/trunk/Changes?rev=1022689&r1=1022688&r2=1022689&view=diff >> >> ============================================================================== >> --- perl/Apache-Test/trunk/Changes (original) >> +++ perl/Apache-Test/trunk/Changes Thu Oct 14 20:17:26 2010 >> @@ -8,6 +8,10 @@ Changes - Apache::Test change logfile >> >> =item 1.34-dev >> >> +Remove the custom config feature, and instead use inline directives, >> +ENV vars, and look for apxs et al in PATH. >> +[Fred Moyer] >> + >> Prevent reconfiguration when t/TEST is called with -run-tests only. >> (rev 1004278) [Torsten Foertsch] >> >> >> Modified: perl/Apache-Test/trunk/MANIFEST >> URL: >> http://svn.apache.org/viewvc/perl/Apache-Test/trunk/MANIFEST?rev=1022689&r1=1022688&r2=1022689&view=diff >> >> ============================================================================== >> --- perl/Apache-Test/trunk/MANIFEST (original) >> +++ perl/Apache-Test/trunk/MANIFEST Thu Oct 14 20:17:26 2010 >> @@ -42,15 +42,33 @@ lib/Apache/TestSort.pm >> lib/Apache/TestTrace.pm >> lib/Apache/TestUtil.pm >> lib/Bundle/ApacheTest.pm >> -t/TEST.PL >> +t/alltest/01bang.t >> +t/alltest/all.t >> +t/alltest2/01bang.t >> +t/alltest2/all.t >> t/bad_coding.t >> +t/cgi-bin/cookies.pl >> t/cgi-bin/cookies.pl.PL >> +t/cgi-bin/next_available_port.pl >> t/cgi-bin/next_available_port.pl.PL >> t/conf/extra.conf.in >> +t/conf/modperl_extra.pl.in >> t/cookies.t >> +t/htdocs/index.html >> +t/log_watch.t >> +t/more/01testpm.t >> +t/more/02testmore.t >> +t/more/03testpm.t >> +t/more/04testmore.t >> +t/more/all.t >> t/next_available_port.t >> t/ping.t >> t/redirect.t >> t/request.t >> +t/response/TestMore/testmorepm.pm >> +t/response/TestMore/testpm.pm >> +t/TEST.PL >> + >> >> META.yml Module meta-data (added by >> MakeMaker) >> + >> >> Modified: perl/Apache-Test/trunk/Makefile.PL >> URL: >> http://svn.apache.org/viewvc/perl/Apache-Test/trunk/Makefile.PL?rev=1022689&r1=1022688&r2=1022689&view=diff >> >> ============================================================================== >> --- perl/Apache-Test/trunk/Makefile.PL (original) >> +++ perl/Apache-Test/trunk/Makefile.PL Thu Oct 14 20:17:26 2010 >> @@ -19,6 +19,7 @@ use Apache::TestRun; >> use Apache::TestTrace; >> use Apache::TestReport; >> use Apache::TestConfig (); >> +use Apache::TestRunPerl; >> >> my $VERSION; >> set_version(); >> @@ -35,6 +36,17 @@ finddepth(sub { >> push @scripts, "$File::Find::dir/$1"; >> }, '.'); >> >> +my $has_mp; >> +eval { require mod_perl2 }; >> +if ($@) { >> + eval { require mod_perl }; >> + if (!$@) { >> + $has_mp = 1; >> + } >> +} else { >> + $has_mp = 2; >> +} >> + >> for (@scripts) { >> Apache::TestMM::generate_script($_); >> } >> @@ -47,12 +59,10 @@ if (TOP_LEVEL) { >> add_Apache__test_target(); >> } >> >> -Apache::TestConfig::custom_config_file_stub_write(); >> - >> my @clean_files = >> - qw(lib/Apache/TestConfigData.pm >> - .mypacklist >> + qw(.mypacklist >> t/TEST >> + t/REPORT >> Makefile.old >> ); >> >> >> Modified: perl/Apache-Test/trunk/lib/Apache/TestConfig.pm >> URL: >> http://svn.apache.org/viewvc/perl/Apache-Test/trunk/lib/Apache/TestConfig.pm?rev=1022689&r1=1022688&r2=1022689&view=diff >> >> ============================================================================== >> --- perl/Apache-Test/trunk/lib/Apache/TestConfig.pm (original) >> +++ perl/Apache-Test/trunk/lib/Apache/TestConfig.pm Thu Oct 14 20:17:26 >> 2010 >> @@ -38,8 +38,6 @@ use constant IS_APACHE_TEST_BUILD => >> grep { -e "$_/lib/Apache/TestConfig.pm" } >> qw(Apache-Test . .. ../Apache-Test); >> >> -use constant CUSTOM_CONFIG_FILE => 'Apache/TestConfigData.pm'; >> - >> use lib (); >> use File::Copy (); >> use File::Find qw(finddepth); >> @@ -59,18 +57,6 @@ use Apache::TestRun (); >> >> use vars qw(%Usage); >> >> -# variables stored in $Apache::TestConfigData::vars >> -my @data_vars_must = qw(httpd apxs); >> -my @data_vars_opt = qw(user group port); >> -# mapping from $Apache::TestConfigData::vars to $ENV settings >> -my %vars_to_env = ( >> - httpd => 'APACHE_TEST_HTTPD', >> - apxs => 'APACHE_TEST_APXS', >> - user => 'APACHE_TEST_USER', >> - group => 'APACHE_TEST_GROUP', >> - port => 'APACHE_TEST_PORT', >> -); >> - >> %Usage = ( >> top_dir => 'top-level directory (default is $PWD)', >> t_dir => 'the t/ test directory (default is $top_dir/t)', >> @@ -181,10 +167,6 @@ sub modperl_build_config { >> >> my $server = ref $self ? $self->server : new_test_server(); >> >> - # we don't want to get mp2 preconfigured data in order to be able >> - # to get the interactive tests running. >> - return undef if $ENV{APACHE_TEST_INTERACTIVE_CONFIG_TEST}; >> - >> # we can't do this if we're using httpd 1.3.X >> # even if mod_perl2 is installed on the box >> # similarly, we shouldn't be loading mp2 if we're not >> @@ -195,6 +177,7 @@ sub modperl_build_config { >> eval { >> require Apache2::Build; >> } or return; >> + >> return Apache2::Build->build_config; >> } >> >> @@ -264,10 +247,6 @@ sub new { >> } >> } >> >> - # custom config options from Apache::TestConfigData >> - # again, this should force reconfiguration >> - custom_config_add_conf_opts($args); >> - >> my $self = bless { >> clean => {}, >> vhosts => {}, >> @@ -298,12 +277,13 @@ sub new { >> #help to find libmodperl.so >> unless ($vars->{src_dir}) { >> my $src_dir = catfile $vars->{top_dir}, qw(.. src modules perl); >> - if (-d $src_dir) { >> - $vars->{src_dir} = $src_dir; >> - } else { >> - $src_dir = catfile $vars->{top_dir}, qw(src modules perl); >> - $vars->{src_dir} = $src_dir if -d $src_dir; >> - } >> + >> + if (-d $src_dir) { >> + $vars->{src_dir} = $src_dir; >> + } else { >> + $src_dir = catfile $vars->{top_dir}, qw(src modules perl); >> + $vars->{src_dir} = $src_dir if -d $src_dir; >> + } >> } >> >> $vars->{t_dir} ||= catfile $vars->{top_dir}, 't'; >> @@ -399,29 +379,18 @@ sub httpd_config { >> "bug report"; >> } >> >> - if ($ENV{APACHE_TEST_NO_STICKY_PREFERENCES}) { >> - error "You specified APACHE_TEST_NO_STICKY_PREFERENCES=1 " . >> - "in which case you must explicitly specify -httpd " . >> - "and/or -apxs options"; >> - Apache::TestRun::exit_perl(0); >> - } >> - >> $self->clean(1); >> - # this method restarts the whole program via exec >> - # so it never returns >> - $self->custom_config_first_time($self->{vars}); >> + >> + error "You must explicitly specify -httpd and/or -apxs options, " >> . >> + "or set \$ENV{APACHE_TEST_HTTPD} and \$ENV{APACHE_TEST_APXS}, >> " . >> + "or set your \$PATH to include the httpd and apxs binaries."; >> + Apache::TestRun::exit_perl(1); >> + >> } >> else { >> debug "Using httpd: $vars->{httpd}"; >> } >> >> - # if we have gotten that far we know at least about the location >> - # of httpd and or apxs, so let's save it if we haven't saved any >> - # custom configs yet >> - unless (custom_config_exists()) { >> - $self->custom_config_save($self->{vars}); >> - } >> - >> $self->inherit_config; #see TestConfigParse.pm >> $self->configure_httpd_eapi; #must come after inherit_config >> >> @@ -434,7 +403,7 @@ sub httpd_config { >> >> $self->{server}->post_config; >> >> - $self; >> + return $self; >> } >> >> sub default_module { >> @@ -694,7 +663,7 @@ sub default_user { >> } >> } >> >> - $user; >> + return $user; >> } >> >> sub default_serveradmin { >> @@ -711,7 +680,18 @@ sub default_apxs { >> return $build_config->{MP_APXS}; >> } >> >> - $ENV{APACHE_TEST_APXS}; >> + if ($ENV{APACHE_TEST_APXS}) { >> + return $ENV{APACHE_TEST_APXS}; >> + } >> + >> + # look in PATH as a last resort >> + if (my $apxs = which('apxs')) { >> + return $apxs; >> + } elsif ($apxs = which('apxs2')) { >> + return $apxs; >> + } >> + >> + return; >> } >> >> sub default_httpd { >> @@ -737,7 +717,22 @@ sub default_httpd { >> } >> } >> >> - $ENV{APACHE_TEST_HTTPD}; >> + if ($ENV{APACHE_TEST_HTTPD}) { >> + return $ENV{APACHE_TEST_HTTPD}; >> + } >> + >> + # look in PATH as a last resort >> + if (my $httpd = which('httpd')) { >> + return $httpd; >> + } elsif ($httpd = which('httpd2')) { >> + return $httpd; >> + } elsif ($httpd = which('apache')) { >> + return $httpd; >> + } elsif ($httpd = which('apache2')) { >> + return $httpd; >> + } >> + >> + return; >> } >> >> my $localhost; >> @@ -1952,520 +1947,6 @@ sub shell_ready { >> return qq["$arg"]; >> } >> >> -### Permanent custom configuration functions ### >> - >> -# determine which configuration file Apache/TestConfigData.pm to use >> -# (as there could be several). The order searched is: >> -# 1) $ENV{HOME}/.apache-test/ >> -# 2) in @INC >> -my $custom_config_path; >> -sub custom_config_path { >> - >> - return $custom_config_path if $custom_config_path; >> - >> - my @inc = (); >> - >> - # XXX $ENV{HOME} isn't propagated in mod_perl >> - push @inc, catdir $ENV{HOME}, '.apache-test' if $ENV{HOME}; >> - >> - push @inc, @INC; >> - >> - for (@inc) { >> - my $candidate = File::Spec->rel2abs(catfile $_, >> CUSTOM_CONFIG_FILE); >> - next unless -e $candidate; >> - # launder for -T >> - ($candidate) = $candidate =~ /^(.*)/; >> - return $custom_config_path = $candidate; >> - } >> - >> - return ''; >> -} >> - >> -# tries to nuke all occurences of custom config >> -# used by things outside the A-T test suite >> -sub custom_config_nuke { >> - my $cwd = fastcwd(); >> - >> - # 1) create a fake empty (blib/)?lib/Apache/TestConfigData.pm >> - # (don't delete it since it may mess up with MakeMaker) >> - my $path = catfile $cwd, "lib", >> Apache::TestConfig::CUSTOM_CONFIG_FILE; >> - # overwrite the empty stub >> - Apache::TestConfig::custom_config_write($path, '') if -e $path; >> - >> - $path = catfile $cwd, "blib", "lib", >> - Apache::TestConfig::CUSTOM_CONFIG_FILE; >> - if (-e $path) { >> - my $mode = (stat _)[2]; >> - my $mode_new = $mode | 0200; >> - chmod $mode_new, $path; >> - debug "emptying $path"; >> - Apache::TestConfig::custom_config_write($path, ''); >> - chmod $mode, $path; >> - } >> - >> - # 2) go through @INC = ~/.apache-test and nuke any occurences of >> - # CUSTOM_CONFIG_FILE >> - my @inc = (); >> - >> - push @inc, catdir $ENV{HOME}, '.apache-test' if $ENV{HOME}; >> - >> - push @inc, @INC; >> - >> - for (@inc) { >> - my $victim = File::Spec->rel2abs(catfile $_, CUSTOM_CONFIG_FILE); >> - next unless -e $victim; >> - debug "unlinking $victim"; >> - unlink $victim; >> - } >> -} >> - >> -sub custom_config_exists { >> - # try to load custom config if it wasn't loaded yet (there are >> - # many entry points to this API) >> - custom_config_load(); >> - >> - # it's enough to check whether we have a custom >> - # config for 'httpd' or 'apxs'. >> - my $httpd = $Apache::TestConfigData::vars->{httpd} || ''; >> - return 1 if $httpd&& -e $httpd&& -x _; >> - >> - my $apxs = $Apache::TestConfigData::vars->{apxs} || ''; >> - return 1 if $apxs&& -e $apxs&& -x _; >> - >> - return 0; >> -} >> - >> -# to be used only from Apache-Test/Makefile.PL to write the custom >> -# configuration module so it'll be copied to blib during 'make' and >> -# updated to use custom config data during 'make test' and then >> -# installed system-wide via 'make install' >> -# >> -# it gets written only if the custom configuration didn't exist >> -# already >> -sub custom_config_file_stub_write { >> - >> - return if custom_config_exists(); >> - >> - # It doesn't matter whether it gets written under modperl-2.0/lib >> - # or Apache-Test/lib root, since Apache::TestRun uses the same >> - # logic and will update that file with real config data, which >> - # 'make install' will then pick and install system-wide. but >> - # remember that $FindBin::Bin is the location of top-level >> - # 'Makefile.PL' >> - require FindBin; # load it only for this particular use >> - my $path = catfile $FindBin::Bin, "lib", >> - Apache::TestConfig::CUSTOM_CONFIG_FILE; >> - >> - # write an empty stub >> - Apache::TestConfig::custom_config_write($path, ''); >> -} >> - >> -sub custom_config_save { >> - my $self = shift; >> - my $conf_opts = shift; >> - >> - if ($ENV{APACHE_TEST_NO_STICKY_PREFERENCES}) { >> - debug "APACHE_TEST_NO_STICKY_PREFERENCES=1 => " . >> - "skipping save of custom config data"; >> - return; >> - } >> - >> - my $vars = $self->{vars}; >> - my $config_dump = ''; >> - >> - # minimum httpd and/or apxs needs to be set >> - return 0 unless $vars->{httpd} or >> $Apache::TestConfigData::vars->{httpd} >> - or $vars->{apxs} or >> $Apache::TestConfigData::vars->{apxs}; >> - >> - # it doesn't matter how these vars were set (httpd may or may not >> - # get set using the path to apxs, w/o an explicit -httpd value) >> - for (@data_vars_must) { >> - next unless my $var = $vars->{$_} || $conf_opts->{$_}; >> - $config_dump .= qq{ '$_' => '$var',\n}; >> - } >> - >> - # save these vars only if they were explicitly set via command line >> - # options. For example if someone builds A-T as user 'foo', then >> - # installs it as root and we save it, all users will now try to >> - # configure under that user 'foo' which won't quite work. >> - for (@data_vars_opt) { >> - next unless my $var = $conf_opts->{$_}; >> - $config_dump .= qq{ '$_' => '$var',\n}; >> - } >> - >> - if (IS_APACHE_TEST_BUILD) { >> - my $path = catfile $vars->{top_dir}, 'lib', CUSTOM_CONFIG_FILE; >> - # if it doesn't exist, then we already have a global config file >> - # if it does, then we have need to update it and its blib/ copy >> - if (-e $path and custom_config_path_is_writable($path)) { >> - custom_config_write($path, $config_dump); >> - # also update blib/lib, since usually that's the one that >> - # appears in @INC when t/TEST is run. and it won't be >> - # synced with blib/ unless 'make' was run >> - my $blib_path = catfile $vars->{top_dir}, >> - 'blib', 'lib', CUSTOM_CONFIG_FILE; >> - if (-e $blib_path and >> custom_config_path_is_writable($blib_path)) { >> - custom_config_write($blib_path, $config_dump); >> - } >> - return 1; >> - } >> - } >> - >> - my $path; >> - if ($path = custom_config_path() ) { >> - # do nothing, the config file already exists (global) >> - debug "Found custom config '$path'"; >> - } >> - elsif (File::Spec->file_name_is_absolute(__FILE__)) { >> - # next try a global location, as if it was configured before >> - # Apache::Test's 'make install' (install in the same dir as >> - # Apache/TestRun.pm) >> - # if the filename is not absolute that means that we are still >> - # in Apache-Test build (could just test for IS_APACHE_TEST_BUILD) >> - my $base = dirname dirname __FILE__; >> - $path = catdir $base, CUSTOM_CONFIG_FILE; >> - } >> - >> - # check whether we can write to the directory of the chosen path >> - # (e.g. root-owned directory) >> - if ($path and custom_config_path_is_writable($path)) { >> - custom_config_write($path, $config_dump); >> - return 1; >> - } >> - # if we have no writable path yet, try to use ~ >> - elsif ($ENV{HOME}) { >> - $path = catfile $ENV{HOME}, '.apache-test', CUSTOM_CONFIG_FILE; >> - if ($path and custom_config_path_is_writable($path)) { >> - custom_config_write($path, $config_dump); >> - return 1; >> - } >> - } >> - >> - # XXX: should we croak since we failed to write config >> - error "Failed to find a config file to save the custom " . >> - "configuration in"; >> - return 0; >> -} >> - >> -sub custom_config_path_is_writable { >> - my $path = shift; >> - >> - return 0 unless $path; >> - >> - my $file_created = ''; >> - my $top_dir_created = ''; >> - # first make sure that the file is writable if it exists >> - # already (it might be non-writable if installed via EU::MM or in >> - # blib/) >> - if (-e $path) { >> - my $mode = (stat _)[2]; >> - $mode |= 0200; >> - chmod $mode, $path; # it's ok if we fail >> - # keep it writable if we have changed it from not being one >> - # so that custom_config_save will be able to just overwrite it >> - } >> - else { >> - my $dir = dirname $path; >> - if ($dir and !-e $dir) { >> - my @dirs = File::Path::mkpath($dir, 0, 0755); >> - # the top level dir to nuke on cleanup if it was created >> - $top_dir_created = shift @dirs if @dirs; >> - } >> - # not really create yet, but will be in the moment >> - $file_created = 1; >> - } >> - >> - # try to open for append (even though it may not exist >> - my $fh = Symbol::gensym; >> - if (open $fh, ">>$path") { >> - close $fh; >> - # cleanup if we just created the file >> - unlink $path if $file_created; >> - File::Path::rmtree([$top_dir_created], 0, 0) if $top_dir_created; >> - return 1; >> - } >> - >> - return 0; >> -} >> - >> -sub custom_config_write { >> - my($path, $config_dump) = @_; >> - >> - my $pkg =<< "EOC"; >> -package Apache::TestConfigData; >> - >> -use strict; >> -use warnings; >> - >> -\$Apache::TestConfigData::vars = { >> -$config_dump >> -}; >> - >> -1; >> - >> -=head1 NAME >> - >> -Apache::TestConfigData - Configuration file for Apache::Test >> - >> -=cut >> -EOC >> - >> - debug "Writing custom config $path"; >> - my $dir = dirname $path; >> - File::Path::mkpath($dir, 0, 0755) unless -e $dir; >> - my $fh = Symbol::gensym; >> - open $fh, ">$path" or die "Cannot open $path: $!"; >> - print $fh $pkg; >> - close $fh; >> -} >> - >> -sub custom_config_add_conf_opts { >> - my $args = shift; >> - >> - return unless $Apache::TestConfigData::vars and >> - keys %$Apache::TestConfigData::vars; >> - >> - debug "overlaying custom config data"; >> - >> - # the logic is quite complicated with 'httpd' and 'apxs', since >> - # one is enough to run the test suite, and we need to avoid the >> - # situation where both are saved in custom config but only one >> - # (let's say httpd) is overriden by the command line /env var and >> - # a hell may break loose if we take that overriden httpd value and >> - # also use apxs from custom config which could point to a different >> - # server. So if there is an override of apxs or httpd, do not use >> - # the custom config for apxs or httpd. >> - my $vars_must_overriden = grep { >> - $ENV{ $vars_to_env{$_} } || $args->{$_} >> - } @data_vars_must; >> - >> - # mod_perl 2.0 build always knows the right httpd location (and >> - # optionally apxs) >> - $vars_must_overriden++ if IS_MOD_PERL_2_BUILD(); >> - >> - unless ($vars_must_overriden) { >> - for (@data_vars_must) { >> - next unless $Apache::TestConfigData::vars->{$_}; >> - $args->{$_} = $Apache::TestConfigData::vars->{$_}; >> - } >> - } >> - >> - for (@data_vars_opt) { >> - next unless $Apache::TestConfigData::vars->{$_}; >> - # env vars override custom config >> - my $env_value = $ENV{ $vars_to_env{$_} }; >> - next unless defined $env_value and length $env_value; >> - $args->{$_} ||= $Apache::TestConfigData::vars->{$_}; >> - } >> -} >> - >> -my $custom_config_loaded = 0; >> -sub custom_config_load { >> - >> - if ($ENV{APACHE_TEST_NO_STICKY_PREFERENCES}) { >> - debug "APACHE_TEST_NO_STICKY_PREFERENCES=1 => " . >> - "skipping load of custom config data"; >> - return; >> - } >> - >> - if ($ENV{APACHE_TEST_INTERACTIVE_CONFIG_TEST}) { >> - debug "APACHE_TEST_INTERACTIVE_CONFIG_TEST=1 => " . >> - "skipping load of custom config data"; >> - return; >> - } >> - >> - return if $custom_config_loaded; >> - >> - if (my $custom_config_path = custom_config_path()) { >> - debug "loading custom config data from: '$custom_config_path'"; >> - $custom_config_loaded++; >> - require $custom_config_path; >> - } >> - else { >> - debug "no custom config data was loaded"; >> - } >> -} >> - >> -sub custom_config_first_time { >> - my $self = shift; >> - my $conf_opts = shift; >> - >> - # we can't prompt when STDIN is not attached to tty, unless we >> - # were told that's it OK via env var (in which case some program >> - # will feed the interactive prompts >> - unless (-t STDIN || $ENV{APACHE_TEST_INTERACTIVE_PROMPT_OK}) { >> - error "STDIN is not attached to tty, skip interactive config"; >> - Apache::TestRun::skip_test_suite(); >> - } >> - >> - my $vars = $self->{vars}; >> - >> - print qq[ >> - >> -We are now going to configure the Apache-Test framework. >> -This configuration process needs to be done only once. >> - >> -]; >> - >> - print qq[ >> - >> -First we need to know where the 'httpd' executable is located. >> -If you have more than one Apache server is installed, make sure >> -you supply the path to the one you are going to use for testing. >> -You can always override this setting at run time via the '-httpd' >> -option. For example: >> - >> - % t/TEST -httpd /path/to/alternative/httpd >> - >> -or via the environment variable APACHE_TEST_HTTPD. For example: >> - >> - % APACHE_TEST_HTTPD=/path/to/alternative/httpd t/TEST >> - >> -If for some reason you want to skip the test suite, type: skip >> -]; >> - >> - { >> - my %choices = (); >> - my @tries = qw(httpd httpd2); >> - # Win32 uses Apache not apache >> - push @tries, WIN32 ? qw(Apache) : qw(apache); >> - for (grep defined $_, >> - map({ catfile $vars->{$_}, $vars->{target} } qw(sbindir >> bindir)), >> - $self->default_httpd, which($vars->{target}), >> - $ENV{APACHE}, $ENV{APACHE2}, >> - $ENV{APACHE_TEST_HTTPD}, $ENV{APACHE_TEST_HTTPD2}, >> - map {which($_)} @tries) { >> - $choices{$_}++ if -e $_&& -x _; >> - } >> - my $optional = 0; >> - my $wanted = 'httpd'; >> - $vars->{$wanted} = >> - _custom_config_prompt_path($wanted, \%choices, $optional); >> - } >> - >> - print qq[ >> - >> -Next we need to know where the 'apxs' script is located. This script >> -provides a lot of information about the apache installation, and makes >> -it easier to find things. However it's not available on all platforms, >> -therefore it's optional. >> - >> -If you don't have it installed it's not a problem. Just press Enter. >> - >> -Notice that if you have Apache 2.x installed that script could be >> -called as 'apxs2'. >> - >> -If you have more than one Apache server is installed, make sure you >> -supply the path to the apxs script you are going to use for testing. >> -You can always override this setting at run time via the '-apxs' >> -option. For example: >> - >> - % t/TEST -apxs /path/to/alternative/apxs >> - >> -or via the environment variable APACHE_TEST_APXS. For example: >> - >> - % APACHE_TEST_APXS=/path/to/alternative/apxs t/TEST >> - >> -]; >> - { >> - my %choices = (); >> - for (grep defined $_, >> - map({ catfile $vars->{$_}, 'apxs' } qw(sbindir bindir)), >> - $self->default_apxs, >> - $ENV{APXS}, $ENV{APACHE_TEST_APXS}, which('apxs'), >> - $ENV{APXS2}, $ENV{APACHE_TEST_APXS2}, which('apxs2')) { >> - $choices{$_}++ if -e $_&& -x _; >> - } >> - my $optional = 1; >> - my $wanted = 'apxs'; >> - $vars->{$wanted} = >> - _custom_config_prompt_path($wanted, \%choices, $optional); >> - } >> - >> - $self->custom_config_save($conf_opts); >> - >> - # we probably could reconfigure on the fly ($self->configure), but >> - # the problem is various cached data which won't be refreshed. so >> - # the simplest is just to restart the run from scratch >> - Apache::TestRun::rerun($vars); >> -} >> - >> -sub _custom_config_prompt_path { >> - my($wanted, $rh_choices, $optional) = @_; >> - >> - my $ans; >> - my $default = ''; >> - my $optional_str = $optional ? " (optional)" : ''; >> - my $prompt = >> - "\nPlease provide a full path to$optional_str '$wanted' >> executable"; >> - >> - my @choices = (); >> - if (%$rh_choices) { >> - $prompt .= " or choose from the following options:\n\n"; >> - my $c = 0; >> - for (sort keys %$rh_choices) { >> - $c++; >> - $prompt .= " [$c] $_\n"; >> - push @choices, $_; >> - } >> - $prompt .= " \n"; >> - $default = 1; # a wild guess >> - } >> - else { >> - $prompt .= ":\n\n"; >> - } >> - >> - my $i = 0; >> - while (1) { >> - >> - # prevent infinite loops in smoke tests, only give the user >> - # five chances to specify httpd or apxs before giving up >> - if ($i++ == 5) { >> - >> - Apache::TestRun::skip_test_suite('y'); >> - return; >> - } >> - >> - $ans = ExtUtils::MakeMaker::prompt($prompt, $default); >> - >> - # strip leading/closing spaces >> - $ans =~ s/^\s*|\s*$//g; >> - >> - # convert the item number to the path >> - if ($ans =~ /^(\d+)$/) { >> - if ($1> 0 and $choices[$1-1]) { >> - $ans = $choices[$1-1]; >> - } >> - else { >> - warn "The choice '$ans' doesn't exist\n"; >> - next; >> - } >> - } >> - >> - if ($optional) { >> - return '' unless $ans; >> - } >> - >> - # stop the test suite without an error (so automatic tools >> - # like CPAN.pm will be able to continue) >> - if (lc($ans) eq 'skip'&& !$optional) { >> - Apache::TestRun::skip_test_suite(); >> - next; # in case they change their mind >> - } >> - >> - unless (File::Spec->file_name_is_absolute($ans)) { >> - warn "The path '$ans' is not an absolute path. " . >> - "Please specify an absolute path\n"; >> - next; >> - } >> - >> - warn("'$ans' doesn't exist.\n"), next unless -e $ans; >> - warn("'$ans' is not a file.\n"), next unless -f _; >> - warn("'$ans' is not executable.\n"), next unless -x _; >> - >> - return $ans; >> - } >> -} >> >> 1; >> >> @@ -2605,13 +2086,6 @@ configuration phase (C<t/TEST -config>, >> automatically unshift the I<project/lib> directory into C<@INC>, via >> the autogenerated I<t/conf/modperl_inc.pl> file. >> >> -=head2 APACHE_TEST_INTERACTIVE_PROMPT_OK >> - >> -Normally interactive prompts aren't run when STDIN is not attached to >> -a tty. But sometimes there is a program that can answer the prompts >> -(e.g. when testing A-T itself). If this variable is true the >> -interactive config won't be skipped (if needed). >> - >> >> =head1 Special Placeholders >> >> >> Modified: perl/Apache-Test/trunk/lib/Apache/TestRun.pm >> URL: >> http://svn.apache.org/viewvc/perl/Apache-Test/trunk/lib/Apache/TestRun.pm?rev=1022689&r1=1022688&r2=1022689&view=diff >> >> ============================================================================== >> --- perl/Apache-Test/trunk/lib/Apache/TestRun.pm (original) >> +++ perl/Apache-Test/trunk/lib/Apache/TestRun.pm Thu Oct 14 20:17:26 2010 >> @@ -89,7 +89,6 @@ my %usage = ( >> 'proxy' => 'proxy requests (default proxy is localhost)', >> 'trace=T' => 'change tracing default to: warning, notice, ' . >> 'info, debug, ...', >> - 'save' => 'save test paramaters into >> Apache::TestConfigData', >> 'one-process' => 'run the server in single process mode', >> (map { $_, "\U$_\E url" } @request_opts), >> ); >> @@ -506,13 +505,6 @@ sub configure { >> $test_config->generate_httpd_conf; >> $test_config->save; >> >> - # custom config save if >> - # 1) requested to save >> - # 2) no saved config yet >> - if ($self->{opts}->{save} or >> - !Apache::TestConfig::custom_config_exists()) { >> - $test_config->custom_config_save($self->{conf_opts}); >> - } >> } >> >> sub try_exit_opts { >> @@ -685,9 +677,6 @@ sub run { >> >> $self->getopts(\...@argv); >> >> - # must be called after getopts so the tracing will be set right >> - Apache::TestConfig::custom_config_load(); >> - >> $self->pre_configure(); >> >> # can't setup the httpd-specific parts of the config object yet >> @@ -1146,44 +1135,6 @@ sub exit_shell { >> CORE::exit $_[0]; >> } >> >> -# successfully abort the test suite execution (to allow automatic >> -# tools like CPAN.pm, to continue with installation). >> -# >> -# if a true value is passed, quit right away >> -# otherwise ask the user, if they may want to change their mind which >> -# will return them back to where they left >> -sub skip_test_suite { >> - my $no_doubt = shift; >> - >> - # we can't prompt when STDIN is not attached to tty, unless we >> - # were told that's it OK via env var (in which case some program >> - # will feed the interactive prompts). Also skip the prompt if the >> - # automated testing environment variable is set. >> - unless (-t STDIN || $ENV{APACHE_TEST_INTERACTIVE_PROMPT_OK} >> - || !$ENV{AUTOMATED_TESTING} ) { >> - $no_doubt = 1; >> - } >> - >> - print qq[ >> - >> -Running the test suite is important to make sure that the module that >> -you are about to install works on your system. If you choose not to >> -run the test suite and you have a problem using this module, make sure >> -to return and run this test suite before reporting any problems to the >> -developers of this module. >> - >> -]; >> - unless ($no_doubt) { >> - my $default = 'No'; >> - my $prompt = 'Skip the test suite?'; >> - my $ans = ExtUtils::MakeMaker::prompt($prompt, $default); >> - return if lc($ans) =~ /no/; >> - } >> - >> - error "Skipping the test suite execution, while returning success >> status"; >> - exit_perl 1; >> -} >> - >> 1; >> >> __END__ >> @@ -1270,153 +1221,4 @@ Don't forget to run the super class' c<p >> >> META: to be completed >> >> - >> - >> -=head1 Persistent Custom Configuration >> - >> -When C<Apache::Test> is first installed or used, it will save the >> -values of C<httpd>, C<apxs>, C<port>, C<user>, and C<group>, if set, >> -to a configuration file C<Apache::TestConfigData>. This information >> -will then be used in setting these options for subsequent uses of >> -C<Apache-Test> unless temprorarily overridden, either by setting the >> -appropriate environment variable (C<APACHE_TEST_HTTPD>, >> -C<APACHE_TEST_APXS>, C<APACHE_TEST_PORT>, C<APACHE_TEST_USER>, and >> -C<APACHE_TEST_GROUP>) or by giving the relevant option (C<-httpd>, >> -C<-apxs>, C<-port>, C<-user>, and C<-group>) when the C<TEST> script >> -is run. >> - >> -To avoid either using previous persistent configurations or saving >> -current configurations, set the C<APACHE_TEST_NO_STICKY_PREFERENCES> >> -environment variable to a true value. >> - >> -Finally it's possible to permanently override the previously saved >> -options by passing C<L<-save|/Saving_Custom_Configuration_Options>>. >> - >> -Here is the algorithm of how and when options are saved for the first >> -time and when they are used. We will use a few variables to simplify >> -the pseudo-code/pseudo-chart flow: >> - >> -C<$config_exists> - custom configuration has already been saved, to >> -get this setting run C<custom_config_exists()>, which tests whether >> -either C<apxs> or C<httpd> values are set. It doesn't check for other >> -values, since all we need is C<apxs> or C<httpd> to get the test suite >> -running. custom_config_exists() checks in the following order >> -F<lib/Apache/TestConfigData.pm> (if during Apache-Test build) , >> -F<~/.apache-test/Apache/TestConfigData.pm> and >> -F<Apache/TestConfigData.pm> in the perl's libraries. >> - >> -C<$config_overriden> - that means that we have either C<apxs> or >> -C<httpd> values provided by user, via env vars or command line options. >> - >> -=over >> - >> -=item 1 Building Apache-Test or modperl-2.0 (or any other project that >> -bundles Apache-Test). >> - >> - 1) perl Apache-Test/Makefile.PL >> - (for bundles top-level Makefile.PL will run this as well) >> - >> - if $config_exists >> - do nothing >> - else >> - create lib/Apache/TestConfigData.pm w/ empty config: {} >> - >> - 2) make >> - >> - 3) make test >> - >> - if $config_exists >> - if $config_overriden >> - override saved options (for those that were overriden) >> - else >> - use saved options >> - else >> - if $config_overriden >> - save them in lib/Apache/TestConfigData.pm >> - (which will be installed on 'make install') >> - else >> - - run interactive prompt for C<httpd> and optionally for >> C<apxs> >> - - save the custom config in lib/Apache/TestConfigData.pm >> - - restart the currently run program >> - >> - modperl-2.0 is a special case in (3). it always overrides 'httpd' >> - and 'apxs' settings. Other settings like 'port', can be used from >> - the saved config. >> - >> - 4) make install >> - >> - if $config_exists only in lib/Apache/TestConfigData.pm >> - it will be installed system-wide >> - else >> - nothing changes (since lib/Apache/TestConfigData.pm won't exist) >> - >> -=item 2 Testing 3rd party modules (after Apache-Test was installed) >> - >> -Notice that the following situation is quite possible: >> - >> - cd Apache-Test >> - perl Makefile.PL&& make install >> - >> -so that Apache-Test was installed but no custom configuration saved >> -(since its C<make test> wasn't run). In which case the interactive >> -configuration should kick in (unless config options were passed) and >> -in any case saved once configured. >> - >> -C<$custom_config_path> - perl's F<Apache/TestConfigData.pm> (at the >> -same location as F<Apache/TestConfig.pm>) if that area is writable by >> -that user (e.g. perl's lib is not owned by 'root'). If not, in >> -F<~/.apache-test/Apache/TestConfigData.pm>. >> - >> - 1) perl Apache-Test/Makefile.PL >> - 2) make >> - 3) make test >> - >> - if $config_exists >> - if $config_overriden >> - override saved options (for those that were overriden) >> - else >> - use saved options >> - else >> - if $config_overriden >> - save them in $custom_config_path >> - else >> - - run interactive prompt for C<httpd> and optionally for >> C<apxs> >> - - save the custom config in $custom_config_path >> - - restart the currently run program >> - >> - 4) make install >> - >> -=back >> - >> - >> - >> -=head2 Saving Custom Configuration Options >> - >> -If you want to override the existing custom configurations options to >> -C<Apache::TestConfigData>, use the C<-save> flag when running C<TEST>. >> - >> -If you are running C<Apache::Test> as a user who does not have >> -permission to alter the system C<Apache::TestConfigData>, you can >> -place your own private configuration file F<TestConfigData.pm> under >> -C<$ENV{HOME}/.apache-test/Apache/>, which C<Apache::Test> will use, if >> -present. An example of such a configuration file is >> - >> - # file $ENV{HOME}/.apache-test/Apache/TestConfigData.pm >> - package Apache::TestConfigData; >> - use strict; >> - use warnings; >> - use vars qw($vars); >> - >> - $vars = { >> - 'group' => 'me', >> - 'user' => 'myself', >> - 'port' => '8529', >> - 'httpd' => '/usr/local/apache/bin/httpd', >> - >> - }; >> - 1; >> - >> - >> - >> - >> =cut >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: dev-unsubscr...@perl.apache.org >> For additional commands, e-mail: dev-h...@perl.apache.org >> >> > > --------------------------------------------------------------------- To unsubscribe, e-mail: dev-unsubscr...@perl.apache.org For additional commands, e-mail: dev-h...@perl.apache.org
